Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

P-Klemmung

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (20)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (20)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (20)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (20)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (20)
  • M Stainless Steel (15)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (15)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (15)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (15)
  • K Cast Iron (20)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (20)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (20)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (20)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (15)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (12)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (7)
    • H4
      Hardened Materials >60 HRC
      (6)
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Facing Facing (20)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (7)
  • Turning Turning (20)
Cutting Condition
  • Heavily Interrupted Cut (15)
  • Interrupted (9)
  • Lightly Interrupted Cut (15)
  • Smooth Cut (15)
  • Varying Depth of Cut (15)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (4)
  • 90.0 (6)
  • 95.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (10)
  • 2.0 (8)
  • 4.0 (14)
  • 8.0 (14)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (2)
  • 0.102 (2)
  • 0.2 (2)
  • 0.203 (2)
  • 0.397 (2)
  • 0.4 (4)
  • 0.792 (2)
  • 0.794 (2)
  • 0.8 (9)
  • 1.188 (2)
  • 1.19 (2)
  • 1.191 (9)
  • 1.2 (9)
  • 1.587 (2)
  • 1.588 (9)
  • 1.6 (14)
  • 2.38 (2)
  • 2.381 (2)
  • 2.4 (12)
  • 3.2 (8)
  • 4.0 (3)
  • 10.0 (1)
  • 12.5 (3)
  • 16.0 (2)
to
Corner Radius
  • 0.004 (2)
  • 0.008 (2)
  • 0.0083 (2)
  • 0.0156 (4)
  • 0.016 (2)
  • 0.031 (4)
  • 0.0312 (2)
  • 0.0313 (9)
  • 0.0315 (2)
  • 0.0468 (2)
  • 0.0469 (9)
  • 0.047 (9)
  • 0.0472 (2)
  • 0.0625 (14)
  • 0.063 (9)
  • 0.0928 (2)
  • 0.0938 (12)
  • 0.094 (8)
  • 0.125 (3)
  • 0.126 (5)
  • 0.1563 (2)
  • 0.1575 (3)
  • 0.3935 (1)
  • 0.3937 (1)
  • 0.4922 (3)
  • 0.6299 (2)
  • 0.63 (2)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (6)
  • 241 (2)
  • CG4 (1)
  • CL4 (8)
  • CM2 (7)
  • CM3 (8)
  • CM4 (4)
  • CM5 (1)
  • CPX (10)
  • CW2 (2)
  • CW2015 (6)
  • CW5025 (6)
  • GX (8)
  • HK1500 (4)
  • HT2 (2)
  • HTX (2)
  • K060 (2)
  • K090 (9)
  • K1 (7)
  • K10M (9)
  • K10P (4)
  • K10U (2)
  • K15U (2)
  • K20K (9)
  • K21 (7)
  • K25M (2)
  • K25P (5)
  • K313 (10)
  • K35P (5)
  • K420 (12)
  • K45 (2)
  • K68 (10)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KB9640 (2)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (2)
  • KBH20B (2)
  • KBK35 (2)
  • KC210 (7)
  • KC250 (9)
  • KC5010 (12)
  • KC5025 (9)
  • KC5410 (9)
  • KC5510 (9)
  • KC5525 (2)
  • KC710 (2)
  • KC720 (7)
  • KC722 (2)
  • KC730 (10)
  • KC7310 (9)
  • KC732 (4)
  • KC8050 (15)
  • KC810 (9)
  • KC850 (15)
  • KC9010 (14)
  • KC9025 (14)
  • KC910 (9)
  • KC9105 (6)
  • KC9110 (17)
  • KC9120 (11)
  • KC9125 (17)
  • KC9140 (14)
  • KC9145 (11)
  • KC9215 (9)
  • KC9225 (9)
  • KC9240 (17)
  • KC9240NEW (15)
  • KC9245 (9)
  • KC9315 (10)
  • KC9320 (9)
  • KC9325 (9)
  • KC935 (11)
  • KC950 (9)
  • KC990 (9)
  • KCK05 (9)
  • KCK05B (9)
  • KCK15 (9)
  • KCK15B (10)
  • KCK20 (10)
  • KCK20B (12)
  • KCM15 (9)
  • KCM15B (6)
  • KCM25 (13)
  • KCM25B (12)
  • KCM35 (9)
  • KCM35B (9)
  • KCP05 (4)
  • KCP05B (2)
  • KCP10 (17)
  • KCP10B (13)
  • KCP25 (17)
  • KCP25B (18)
  • KCP30 (15)
  • KCP30B (14)
  • KCP40 (14)
  • KCP40B (14)
  • KCPK05 (10)
  • KCS10 (3)
  • KCS10B (9)
  • KCU10 (12)
  • KCU25 (10)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KM1 (6)
  • KMF (2)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (2)
  • KT315 (2)
  • KT325 (2)
  • KU10T (2)
  • KU30T (9)
  • KY1310 (4)
  • KY1320 (6)
  • KY1540 (4)
  • KY1615 (7)
  • KY2000 (6)
  • KY2100 (2)
  • KY3000 (9)
  • KY3400 (9)
  • KY3500 (9)
  • KY4000 (4)
  • KY4300 (6)
  • KY4400 (6)
  • KYK10 (2)
  • KYK25 (6)
  • KYK35 (9)
  • KYS25 (4)
  • KYS30 (4)
  • MC2 (1)
  • NL200 (2)
  • NL250 (9)
  • NL300 (13)
  • NL400 (6)
  • NL920 (4)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (2)
  • SP0819 (9)
  • SP3019 (9)
  • SP4019 (6)
  • SPADAP (7)
  • SPN4W2 (3)
  • THM (7)
  • THM-X (5)
  • THMF-X (2)
  • TN10P (6)
  • TN10U (2)
  • TN15M (9)
  • TN15U (2)
  • TN2000 (10)
  • TN20K (9)
  • TN20P (9)
  • TN30M (9)
  • TN30P (11)
  • TN4000 (10)
  • TN5015 (9)
  • TN5020 (9)
  • TN5105 (2)
  • TN5120 (9)
  • TN6010 (2)
  • TN6025 (2)
  • TN7005 (2)
  • TN7010 (12)
  • TN7015 (14)
  • TN7025 (14)
  • TN7035 (12)
  • TN7105 (2)
  • TN7110 (6)
  • TN7115 (14)
  • TN7125 (14)
  • TN7135 (12)
  • TN8025 (11)
  • TTI15 (2)
  • TTM09 (3)
  • TTR (5)
  • TTR-X (3)
  • TTS (7)
  • TTX (2)
  • W00342 (3)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH25U (2)
  • WBH30P (2)
  • WBK40U (2)
  • WBK45U (2)
  • WDN00U (2)
  • WDN25U (2)
  • WK05CT (9)
  • WK15CT (2)
  • WK20CT (9)
  • WM15CT (9)
  • WM25CT (12)
  • WM35CT (9)
  • WP05CT (2)
  • WP15CT (14)
  • WP25CT (14)
  • WP35CT (14)
  • WS10PT (9)
  • WS25PT (9)
  • WU10HT (6)
  • X00511 (2)
Wiper Insert
  • N (20)
  • Y (6)
Minimum Axial Groove Diameter
  • 3.937 (8)
to
Minimum Axial Groove Diameter
  • 100.0 (8)
to
Maximum Bore Depth
  • 70.0 (7)
to
Maximum Bore Depth
  • 2.756 (7)
to
frontEnd
Clamp Style
  • P (20)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (2)
  • R-ROUND (6)
  • S-SQUARE 90 (4)
Maximum Cutting Depth
  • 40.15 (2)
to
Maximum Cutting Depth
  • 1.5807 (2)
to
insertGeometry
Cutting Tool Material
  • B H (2)
  • B L (2)
  • C A (10)
  • C N (9)
  • D P (2)
  • H T (3)
  • H W (20)
backEnd
Back-End Diameter
  • 3.1496 (20)
to
Back-End Diameter
  • 80.0 (20)
to
other
Platform
  • KM80 (17)
Tool Unit
  • M (20)
Over All Length [L]
  • 70.0 (18)
  • 80.0 (2)
to
Over All Length [L]
  • 2.7559 (6)
  • 2.756 (11)
  • 2.7569 (1)
  • 3.1496 (2)
to
Insert Hand
  • N (20)
Cutting Condition Material
  • H-All (7)
  • K-All (15)
  • K1 (2)
  • M-All (13)
  • N-All (10)
  • P-All (15)
  • S-All (13)
  • S4 (2)
Maximum Depth of Cut
Maximum Depth of Cut
Category Path
No filters matching ""
View Products in
Metric
Inch
KM80TS™ Schneidköpfe

P-Clamping
(8 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3662598 KM80TSPCLNL12 KM80TSPCLNL12 70.0000 2.756 53.0000 2.086 100.0000 3.937 CN..120408/CN..432 2.19 4.82
    3662599 KM80TSPCLNL16 KM80TSPCLNL16 70.0000 2.756 53.0000 2.086 100.0000 3.937 CN..160612/CN..543 2.18 4.80
      3662600 KM80TSPCLNL19 KM80TSPCLNL19 70.0000 2.756 53.0000 2.087 100.0000 3.937 CN..190612/CN..643 2.17 4.79
        3662601 KM80TSPCLNL25 KM80TSPCLNL25 70.0000 2.756 53.0000 2.086 100.0000 3.937 CN..250924/CN..866 2.15 4.74
          3662602 KM80TSPCLNR12 KM80TSPCLNR12 70.0000 2.756 53.0000 2.086 100.0000 3.937 CN..120408/CN..432 2.19 4.82
            3662603 KM80TSPCLNR16 KM80TSPCLNR16 70.0000 2.756 53.0000 2.087 100.0000 3.937 CN..160612/CN..543 2.18 4.80
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              KM80TS™ Schneidköpfe

              P-Klemmung
              (2 Products)
              • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms Weight Pounds
              3662606 KM80TSPRDCN20 KM80TSPRDCN20 70.0000 2.755 10.0000 .3937 40.1500 1.580 RCMT2006M0 1.48 3.26
                3662607 KM80TSPRDCN25 KM80TSPRDCN25 70.0000 2.755 12.5000 .4921 40.1500 1.580 RCMX2507M0RP 1.54 3.39
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  KM80TS™ Schneidköpfe

                  P-Klemmung
                  (4 Products)
                  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  3662623 KM80TSPRGCL25 KM80TSPRGCL25 70.0000 2.755 53.0000 2.086 RC..2507M0 2.02 4.45
                    3662624 KM80TSPRGCL32 KM80TSPRGCL32 80.0000 3.149 53.0000 2.086 RC..320900 2.63 5.79
                      3662625 KM80TSPRGCR25 KM80TSPRGCR25 70.0000 2.755 53.0000 2.086 RC..2507M0 2.02 4.46
                        3662626 KM80TSPRGCR32 KM80TSPRGCR32 80.0000 3.149 53.0000 2.086 RC..320900 2.63 5.79
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          KM80TS™ Schneidköpfe

                          P-Clamping
                          (2 Products)
                          • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                          3662627 KM80TSPSDNN19 KM80TSPSDNN19 70.0000 2.756 0.0000 .0000 SN..190612/SN..643 1.76 3.87
                            3662628 KM80TSPSDNN25 KM80TSPSDNN25 70.0000 2.755 0.0000 .0000 SN..250724/SN..856 1.75 3.85
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              KM80TS™ Schneidköpfe

                              P-Clamping
                              (4 Products)
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                              3662629 KM80TSPSRNL19 KM80TSPSRNL19 70.0000 2.756 48.0000 1.890 SN..190612/SN..643 2.11 4.66
                                3662630 KM80TSPSRNL25 KM80TSPSRNL25 70.0000 2.756 48.0000 1.890 SN..250724/SN..-856 2.06 4.54
                                  3662631 KM80TSPSRNR19 KM80TSPSRNR19 70.0000 2.756 48.0000 1.890 SN..190612/SN..643 2.11 4.66
                                    3662632 KM80TSPSRNR25 KM80TSPSRNR25 70.0000 2.756 48.0000 1.890 SN..250724/SN..-856 2.06 4.54
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor

                                      SUPPORT

                                      Hilfe zu Produkten
                                      E-Mail-Adresse | 0800 1015774

                                       

                                      Hilfe bei Bestellungen

                                      E-Mail-Adresse | 800.979.4342


                                      Chat mit einem Experten  Available 8am-6pm EST

                                      WIDIA WERBEARTIKEL

                                      Karriere

                                      Durchsuchen Sie unsere Stellenangebote

                                      SOZIALE MEDIEN

                                      BLEIBEN WIR IM KONTAKT

                                      Bleiben wir im Kontakt

                                      © 2019 WIDIA Product Group 2018, Privacy Policy

                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      Can’t find the file type you’re looking for?
                                      Request Drawings »

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart