successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

M-Klemmung

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (44)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (44)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (44)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (44)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (44)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (44)
  • M Stainless Steel (44)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (44)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (44)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (44)
  • K Cast Iron (46)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (46)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (46)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (46)
  • N Non-Ferrous Materials (33)
    • N1
      Wrought Aluminum
      (33)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (33)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (13)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (33)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (33)
    • N6
      Carbon, Graphite Composites, CFRP
      (33)
    • N7
      MMC's
      (33)
  • S High-Temp Alloys (46)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (46)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (46)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (46)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (44)
  • H Hardened Materials (30)
    • H1
      Hardened Materials 44-48 HRC
      (30)
    • H2
      Hardened Materials 48-55 HRC
      (30)
    • H3
      Hardened Materials 56-60 HRC
      (30)
    • H4
      Hardened Materials >60 HRC
      (30)
Applications
  • Back Boring Back Boring (2)
  • Chamfer Turning Chamfer Turning (18)
  • Facing Facing (38)
  • Multiple Direction Cutting Multiple Direction Cutting (46)
  • Plunge Turning Plunge Turning (18)
  • Profiling Profiling (38)
  • TRN Boring TRN Boring (27)
  • Turning Turning (46)
Cutting Condition
  • Heavily Interrupted Cut (46)
  • Interrupted (29)
  • Lightly Interrupted Cut (46)
  • Smooth Cut (46)
  • Varying Depth of Cut (46)
Tool Cutting Edge Angle
  • 45.0 (4)
  • 62.5 (2)
  • 75.0 (14)
  • 93.0 (12)
  • 95.0 (10)
  • 107.5 (4)
to
Cutting Edges Per Insert
  • 1.0 (26)
  • 2.0 (30)
  • 3.0 (2)
  • 4.0 (44)
  • 6.0 (2)
  • 8.0 (30)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (13)
  • 0.102 (14)
  • 0.2 (13)
  • 0.203 (11)
  • 0.34 (7)
  • 0.397 (20)
  • 0.4 (24)
  • 0.406 (14)
  • 0.41 (8)
  • 0.6 (2)
  • 0.792 (7)
  • 0.794 (22)
  • 0.8 (35)
  • 0.81 (8)
  • 1.188 (2)
  • 1.191 (35)
  • 1.2 (35)
  • 1.588 (24)
  • 1.6 (42)
  • 2.38 (2)
  • 2.381 (18)
  • 2.4 (24)
  • 3.2 (14)
  • 4.0 (5)
to
Corner Radius
  • 0.004 (20)
  • 0.008 (13)
  • 0.013 (7)
  • 0.0156 (24)
  • 0.016 (20)
  • 0.031 (26)
  • 0.0312 (22)
  • 0.0313 (35)
  • 0.032 (8)
  • 0.0468 (2)
  • 0.0469 (35)
  • 0.047 (29)
  • 0.0625 (42)
  • 0.063 (22)
  • 0.0928 (4)
  • 0.0938 (31)
  • 0.094 (14)
  • 0.125 (7)
  • 0.126 (7)
  • 0.1575 (5)
  • 0.312 (7)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (26)
  • CL4 (18)
  • CM2 (25)
  • CM3 (18)
  • CM4 (2)
  • CPX (27)
  • CW2 (7)
  • CW2015 (28)
  • CW3020 (2)
  • CW5025 (30)
  • GX (11)
  • HK1500 (15)
  • HT2 (7)
  • K060 (9)
  • K090 (33)
  • K1 (18)
  • K10M (33)
  • K10P (22)
  • K10U (13)
  • K15U (20)
  • K20K (33)
  • K21 (11)
  • K25M (20)
  • K25P (25)
  • K313 (33)
  • K35P (16)
  • K420 (31)
  • K45 (11)
  • K68 (31)
  • KB1340 (2)
  • KB1345 (7)
  • KB1610 (13)
  • KB1625 (11)
  • KB1630 (11)
  • KB5610 (13)
  • KB5625 (11)
  • KB5630 (11)
  • KB9610 (20)
  • KB9640 (4)
  • KBH10 (20)
  • KBH10B (18)
  • KBH20 (20)
  • KBH20B (18)
  • KBK35 (2)
  • KBK45 (2)
  • KC210 (25)
  • KC250 (20)
  • KC5010 (44)
  • KC5025 (33)
  • KC5410 (33)
  • KC5510 (33)
  • KC5525 (16)
  • KC720 (20)
  • KC730 (26)
  • KC7310 (33)
  • KC732 (15)
  • KC8050 (44)
  • KC810 (33)
  • KC850 (44)
  • KC9010 (33)
  • KC9025 (44)
  • KC910 (33)
  • KC9105 (28)
  • KC9110 (44)
  • KC9120 (44)
  • KC9125 (44)
  • KC9140 (44)
  • KC9145 (40)
  • KC9210 (7)
  • KC9215 (33)
  • KC9225 (33)
  • KC9240 (44)
  • KC9240NEW (40)
  • KC9245 (33)
  • KC9315 (33)
  • KC9320 (33)
  • KC9325 (33)
  • KC935 (37)
  • KC950 (40)
  • KC990 (40)
  • KCD25 (7)
  • KCK05 (33)
  • KCK05B (33)
  • KCK15 (33)
  • KCK15B (33)
  • KCK20 (33)
  • KCK20B (37)
  • KCM15 (33)
  • KCM15B (28)
  • KCM25 (40)
  • KCM25B (40)
  • KCM35 (33)
  • KCM35B (22)
  • KCP05 (22)
  • KCP05B (27)
  • KCP10 (44)
  • KCP10B (40)
  • KCP25 (44)
  • KCP25B (44)
  • KCP30 (44)
  • KCP30B (40)
  • KCP40 (40)
  • KCP40B (40)
  • KCPK05 (33)
  • KCS10B (33)
  • KCU10 (44)
  • KCU25 (33)
  • KD050 (11)
  • KD081 (11)
  • KD100 (11)
  • KD120 (11)
  • KD1400 (13)
  • KD1405 (11)
  • KD1425 (13)
  • KM1 (5)
  • KT1120 (4)
  • KT125 (18)
  • KT150 (11)
  • KT175 (18)
  • KT315 (20)
  • KT325 (7)
  • KTP10 (7)
  • KU10T (20)
  • KU30T (33)
  • KY1310 (13)
  • KY1320 (30)
  • KY1525 (2)
  • KY1540 (15)
  • KY1615 (28)
  • KY2000 (17)
  • KY2100 (9)
  • KY3000 (33)
  • KY3400 (24)
  • KY3500 (35)
  • KY4000 (6)
  • KY4300 (17)
  • KY4400 (30)
  • KYK10 (11)
  • KYK25 (19)
  • KYK35 (35)
  • KYS25 (15)
  • KYS30 (17)
  • NL200 (7)
  • NL250 (33)
  • NL300 (31)
  • NL400 (17)
  • NL920 (20)
  • PS5 (7)
  • SP0819 (22)
  • SP3019 (15)
  • SP4019 (8)
  • SP4036 (4)
  • SP4093 (4)
  • SPADAP (22)
  • SPN4W2 (5)
  • THM (18)
  • TN10P (28)
  • TN10U (20)
  • TN15M (33)
  • TN15U (20)
  • TN2000 (20)
  • TN20K (33)
  • TN20P (33)
  • TN30M (33)
  • TN30P (33)
  • TN4000 (20)
  • TN5015 (22)
  • TN5020 (22)
  • TN5105 (16)
  • TN5120 (29)
  • TN6010 (18)
  • TN6025 (9)
  • TN7005 (16)
  • TN7010 (29)
  • TN7015 (40)
  • TN7025 (40)
  • TN7035 (22)
  • TN7105 (9)
  • TN7110 (17)
  • TN7115 (40)
  • TN7125 (33)
  • TN7135 (22)
  • TN8025 (40)
  • TTI15 (7)
  • TTM09 (5)
  • TTR-X (5)
  • TTS (18)
  • TTX (7)
  • W00342 (5)
  • WBH10C (18)
  • WBH10P (11)
  • WBH10U (11)
  • WBH25P (11)
  • WBH25U (14)
  • WBH30P (11)
  • WBK40U (2)
  • WBK45U (14)
  • WDN00U (7)
  • WDN25U (13)
  • WK05CT (33)
  • WK15CT (9)
  • WK20CT (33)
  • WM15CT (33)
  • WM25CT (40)
  • WM35CT (33)
  • WP05CT (2)
  • WP15CT (44)
  • WP25CT (44)
  • WP35CT (44)
  • WS10PT (33)
  • WS25PT (33)
  • WU10HT (28)
Wiper Insert
  • N (46)
  • Y (14)
Minimum Axial Groove Diameter
  • 4.173 (26)
  • 4.1732 (2)
  • 5.9055 (1)
  • 5.906 (1)
to
Minimum Axial Groove Diameter
  • 106.0 (28)
  • 150.0 (2)
to
Maximum Bore Depth
  • 70.0 (27)
to
Maximum Bore Depth
  • 2.756 (27)
to
frontEnd
Clamp Style
  • M (46)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (14)
  • D-DIAMOND/RHOMBIC 55 (14)
  • S-SQUARE 90 (12)
  • V-DIAMOND/RHOMBIC 35 (4)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (22)
  • B L (20)
  • C A (35)
  • C N (35)
  • D P (20)
  • H T (20)
  • H W (46)
backEnd
Back-End Diameter
  • 3.1496 (46)
to
Back-End Diameter
  • 80.0 (46)
to
other
Platform
  • KM80 (42)
Tool Unit
  • M (46)
Over All Length [L]
  • 70.0 (46)
to
Over All Length [L]
  • 2.7559 (17)
  • 2.756 (29)
to
Insert Hand
  • N (46)
Cutting Condition Material
  • H-All (30)
  • K-All (46)
  • K1 (2)
  • M-All (40)
  • N-All (33)
  • P-All (44)
  • S-All (40)
  • S4 (11)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM80TS™ Schneidköpfe

M-Clamping
(2 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3662523 KM80TSMCKNL19 KM80TSMCKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.39 5.28
    3662524 KM80TSMCKNR19 KM80TSMCKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.39 5.28
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM80TS™ Schneidköpfe

      M-Clamping
      (8 Products)
      • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
      3662525 KM80TSMCLNL12 KM80TSMCLNL12 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..120408/CN..432 2.21 4.87
        3662526 KM80TSMCLNL16 KM80TSMCLNL16 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..160612/CN..543 2.20 4.86
          3662527 KM80TSMCLNL19 KM80TSMCLNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.20 4.85
            3662528 KM80TSMCLNL25 KM80TSMCLNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.21 4.86
              3662529 KM80TSMCLNR12 KM80TSMCLNR12 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..120408/CN..432 2.21 4.87
                3662530 KM80TSMCLNR16 KM80TSMCLNR16 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..160612/CN..543 2.20 4.86
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  KM80TS™ Schneidköpfe

                  M-Clamping
                  (4 Products)
                  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  3662534 KM80TSMCRNL19 KM80TSMCRNL19 70.0000 2.756 48.0000 1.889 106.0000 4.173 CN..190612/CN..643 2.26 4.99
                    3662535 KM80TSMCRNL25 KM80TSMCRNL25 70.0000 2.756 48.0000 1.889 106.0000 4.173 CN..250924/CN..866 2.25 4.97
                      3662537 KM80TSMCRNR19 KM80TSMCRNR19 70.0000 2.755 48.0000 1.889     CN..190612/CN..643 2.26 4.99
                        3662538 KM80TSMCRNR25 KM80TSMCRNR25 70.0000 2.755 48.0000 1.889     CN..250924/CN..866 2.25 4.97
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          KM80TS™ Schneidköpfe

                          M-Clamping
                          (4 Products)
                          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                          3662541 KM80TSMDJNL1504 KM80TSMDJNL1504 70.0000 2.755 53.0000 2.086 DN..150408/DN..432 1.85 4.07
                            3662563 KM80TSMDJNL1506 KM80TSMDJNL1506 70.0000 2.755 53.0000 2.086 DN..150608/DN.442 1.84 4.06
                              3662542 KM80TSMDJNR1504 KM80TSMDJNR1504 70.0000 2.756 53.0000 2.087 DN..150408/DN..432 1.86 4.10
                                3662564 KM80TSMDJNR1506 KM80TSMDJNR1506 70.0000 2.756 53.0000 2.087 DN..150608/DN.442 1.84 4.06
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  KM80TS™ Schneidköpfe

                                  M-Clamping
                                  (2 Products)
                                  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  3662565 KM80TSMDPNN1504 KM80TSMDPNN1504 70.0000 2.755 0.0000 .0000 DN..150408/DN.432 1.73 3.81
                                    3662566 KM80TSMDPNN1506 KM80TSMDPNN1506 70.0000 2.755 0.0000 .0000 DN..150608/DN.442 1.72 3.80
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      KM80TS™ Schneidköpfe

                                      M-Clamping
                                      (4 Products)
                                      • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                      3662567 KM80TSMDQNL1504 KM80TSMDQNL1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.01 4.44
                                        3662569 KM80TSMDQNL1506 KM80TSMDQNL1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.01 4.43
                                          3662568 KM80TSMDQNR1504 KM80TSMDQNR1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.01 4.44
                                            3662570 KM80TSMDQNR1506 KM80TSMDQNR1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.01 4.43
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty
                                              KM80TS™ Schneidköpfe

                                              M-Clamping
                                              (4 Products)
                                              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                              3662571 KM80TSMDUNL1504 KM80TSMDUNL1504 70.0000 2.755 53.0000 2.086 106.0000 4.173 DN..150408/DN.432 2.27 5.02
                                                3662573 KM80TSMDUNL1506 KM80TSMDUNL1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.27 5.01
                                                  3662572 KM80TSMDUNR1504 KM80TSMDUNR1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.28 5.02
                                                    3662574 KM80TSMDUNR1506 KM80TSMDUNR1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.27 5.01
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Qty
                                                      KM80TS™ Schneidköpfe

                                                      M-Clamping
                                                      (2 Products)
                                                      • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                      3662577 KM80TSMSDNN19 KM80TSMSDNN19 70.0000 2.755 0.0000 .0000 SN..190512/SN.643 1.85 4.08
                                                        3662578 KM80TSMSDNN25 KM80TSMSDNN25 70.0000 2.755 0.0000 .0000 SN..250924/SN.866 1.76 3.88
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          KM80TS™ Schneidköpfe

                                                          M-Clamping
                                                          (4 Products)
                                                          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                          3662579 KM80TSMSKNL19 KM80TSMSKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190512/SN.643 2.37 5.23
                                                            3662580 KM80TSMSKNL25 KM80TSMSKNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.45
                                                              3662581 KM80TSMSKNR19 KM80TSMSKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190512/SN.643 2.37 5.23
                                                                3662582 KM80TSMSKNR25 KM80TSMSKNR25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.45
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor
                                                                  Qty
                                                                  KM80TS™ Schneidköpfe

                                                                  M-Clamping
                                                                  (4 Products)
                                                                  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                                  View Products
                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                                  3662583 KM80TSMSRNL19 KM80TSMSRNL19 70.0000 2.755 48.0000 1.889 SN..190512/SN.643 2.12 4.67
                                                                    3662584 KM80TSMSRNL25 KM80TSMSRNL25 70.0000 2.755 48.0000 1.889 SN..250924/SN.866 2.19 4.82
                                                                      3662585 KM80TSMSRNR19 KM80TSMSRNR19 70.0000 2.755 48.0000 1.889 SN..190512/SN.643 2.12 4.67
                                                                        3662586 KM80TSMSRNR25 KM80TSMSRNR25 70.0000 2.755 48.0000 1.889 SN..250924/SN.866 2.19 4.82
                                                                          List price:
                                                                          Discount: %
                                                                          Your price::
                                                                          Replacement This item is not available
                                                                          Replacement Product This item may be available through a distributor
                                                                          Qty
                                                                          KM80TS™ Schneidköpfe

                                                                          M-Clamping
                                                                          (2 Products)
                                                                          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                                          View Products
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                          3662587 KM80TSMSSNL25 KM80TSMSSNL25 70.0000 2.755 53.0000 2.086 150.0000 5.905 SN..250924/SN.866 2.18 4.81
                                                                            3662588 KM80TSMSSNR25 KM80TSMSSNR25 70.0000 2.756 53.0000 2.086 150.0000 5.906 SN..250924/SN.866 2.18 4.81
                                                                              List price:
                                                                              Discount: %
                                                                              Your price::
                                                                              Replacement This item is not available
                                                                              Replacement Product This item may be available through a distributor
                                                                              Qty
                                                                              KM80TS™ Schneidköpfe

                                                                              M-Clamping
                                                                              (2 Products)
                                                                              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                                              View Products
                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                                              3662561 KM80TSMVJNL16 KM80TSMVJNL16 70.0000 2.755 53.0000 2.086 VN..160408/VN.332 1.79 3.94
                                                                                3662562 KM80TSMVJNR16 KM80TSMVJNR16 70.0000 2.755 53.0000 2.086 VN..160408/VN.332 1.79 3.94
                                                                                  List price:
                                                                                  Discount: %
                                                                                  Your price::
                                                                                  Replacement This item is not available
                                                                                  Replacement Product This item may be available through a distributor
                                                                                  Qty
                                                                                  KM80TS™ Schneidköpfe

                                                                                  M-Clamping
                                                                                  (2 Products)
                                                                                  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                                                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                                                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                                                  View Products
                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                                  3662593 KM80TSMVUNL16 KM80TSMVUNL16 70.0000 2.755 53.0000 2.086 106.0000 4.173 VN..160408/VN.332 2.11 4.64
                                                                                    3662594 KM80TSMVUNR16 KM80TSMVUNR16 70.0000 2.756 53.0000 2.086 106.0000 4.173 VN..160408/VN.332 2.11 4.64
                                                                                      List price:
                                                                                      Discount: %
                                                                                      Your price::
                                                                                      Replacement This item is not available
                                                                                      Replacement Product This item may be available through a distributor
                                                                                      Qty
                                                                                      KM80TS™ Schneidköpfe

                                                                                      M-Clamping
                                                                                      (2 Products)
                                                                                      • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                                                      View Products
                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                                      3662595 KM80TSMWLNL08 KM80TSMWLNL08 70.0000 2.756 53.0000 2.086 106.0000 4.173 WN..080408/WN.432 2.15 4.74
                                                                                        3662596 KM80TSMWLNR08 KM80TSMWLNR08 70.0000 2.756 53.0000 2.086 106.0000 4.173 WN..080408/WN.432 2.15 4.74
                                                                                          List price:
                                                                                          Discount: %
                                                                                          Your price::
                                                                                          Replacement This item is not available
                                                                                          Replacement Product This item may be available through a distributor
                                                                                          Qty
                                                                                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                                          You are about to create a duplicate . Do you want to proceed?
                                                                                          You are about to delete Do you want to proceed?
                                                                                          What would you like to rename your to?
                                                                                          Please enter a valid name
                                                                                          Please enter a name for the duplicate
                                                                                          Please enter a valid name
                                                                                          You are about to add to your My Solutions page. Do you want to proceed?
                                                                                          Please enter a valid name
                                                                                          Send a copy of

                                                                                          Please enter a valid Email
                                                                                          Please enter a valid name

                                                                                          We have found the following CAD Drawings

                                                                                          Select the files you are looking for and download them all at once

                                                                                          You should be logged to see your dashboard information
                                                                                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                                          item(s) successfully added to the cart
                                                                                          View Cart