successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Top Notch® Gewindedrehen und Einstechen

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (12)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum
      (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (12)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (12)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (12)
    • N6
      Carbon, Graphite Composites, CFRP
      (12)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (12)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (12)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (12)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (12)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (4)
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (4)
  • Grooving Grooving (12)
  • ID Facing ID Facing (4)
  • ID Grooving ID Grooving (10)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (10)
  • Threading Threading (12)
  • Turning Turning (4)
Type of Thread
  • 60 (8)
  • ACME (10)
  • API (8)
  • API RD (6)
  • BSW (4)
  • BUTTRESS (8)
  • M (4)
  • NPT (4)
  • STUB ACME (4)
  • UN (8)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (12)
  • Lightly Interrupted Cut (12)
  • Smooth Cut (12)
  • Varying Depth of Cut (12)
Tool Cutting Edge Angle
  • 90.0 (12)
to
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (12)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (2)
  • 0.051 (2)
  • 0.057 (2)
  • 0.066 (4)
  • 0.076 (8)
  • 0.08 (4)
  • 0.089 (2)
  • 0.09 (2)
  • 0.094 (4)
  • 0.097 (2)
  • 0.1 (4)
  • 0.102 (4)
  • 0.116 (2)
  • 0.117 (2)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.15 (4)
  • 0.155 (3)
  • 0.157 (4)
  • 0.16 (4)
  • 0.165 (8)
  • 0.173 (4)
  • 0.178 (4)
  • 0.19 (8)
  • 0.191 (8)
  • 0.198 (4)
  • 0.2 (4)
  • 0.202 (4)
  • 0.224 (4)
  • 0.235 (4)
  • 0.244 (2)
  • 0.25 (4)
  • 0.251 (4)
  • 0.254 (8)
  • 0.255 (2)
  • 0.269 (4)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.315 (6)
  • 0.318 (10)
  • 0.33 (4)
  • 0.34 (4)
  • 0.343 (6)
  • 0.356 (4)
  • 0.404 (4)
  • 0.406 (6)
  • 0.43 (4)
  • 0.445 (8)
  • 0.472 (2)
  • 0.49 (4)
  • 0.508 (4)
  • 0.565 (2)
  • 0.57 (2)
  • 0.572 (10)
  • 0.575 (6)
  • 0.787 (4)
  • 0.826 (4)
  • 0.902 (8)
  • 1.0 (4)
  • 1.194 (4)
  • 1.195 (2)
  • 1.25 (4)
  • 1.5 (4)
  • 1.585 (4)
  • 1.588 (8)
  • 1.59 (2)
  • 1.75 (4)
  • 1.98 (2)
  • 1.981 (4)
  • 2.0 (8)
  • 2.25 (8)
  • 2.388 (8)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (2)
  • 0.0026 (4)
  • 0.003 (8)
  • 0.0031 (4)
  • 0.0035 (2)
  • 0.0037 (4)
  • 0.0038 (2)
  • 0.004 (4)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (4)
  • 0.0059 (4)
  • 0.006 (3)
  • 0.0062 (4)
  • 0.0065 (8)
  • 0.0068 (4)
  • 0.007 (4)
  • 0.0075 (8)
  • 0.0078 (4)
  • 0.0079 (1)
  • 0.008 (4)
  • 0.0088 (4)
  • 0.0093 (4)
  • 0.0096 (2)
  • 0.0099 (4)
  • 0.01 (8)
  • 0.0106 (4)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.0124 (4)
  • 0.0125 (10)
  • 0.013 (4)
  • 0.0135 (8)
  • 0.014 (4)
  • 0.0159 (4)
  • 0.016 (6)
  • 0.017 (4)
  • 0.0175 (8)
  • 0.0186 (2)
  • 0.0193 (4)
  • 0.02 (4)
  • 0.0225 (10)
  • 0.031 (4)
  • 0.0325 (4)
  • 0.0355 (8)
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (8)
  • 0.0689 (4)
  • 0.078 (4)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.094 (8)
  • 0.0984 (4)
  • 0.106 (2)
  • 0.125 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (4)
  • K313 (8)
  • K420 (12)
  • K4H (4)
  • K68 (12)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (4)
  • KC250 (4)
  • KC5010 (10)
  • KC5025 (12)
  • KC5410 (8)
  • KC710 (8)
  • KC720 (8)
  • KC722 (8)
  • KC730 (10)
  • KC732 (4)
  • KC810 (12)
  • KC850 (12)
  • KC910 (4)
  • KC9110 (8)
  • KC9120 (4)
  • KC9320 (8)
  • KC935 (8)
  • KC950 (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCP10B (8)
  • KCP25B (8)
  • KCU10 (9)
  • KCU25 (9)
  • KD050 (2)
  • KD081 (4)
  • KD100 (6)
  • KD120 (8)
  • KD1425 (3)
  • KT175 (4)
  • KT315 (8)
  • KU10T (8)
  • KU25T (8)
  • KU30T (8)
  • KY3000 (8)
  • THM (4)
  • TN10P (6)
  • TN6010 (8)
  • TN6025 (11)
  • TN7110 (8)
  • WU10HT (2)
  • WU10PT (4)
  • WU25PT (2)
Wiper Insert
  • N (12)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 3.5 (2)
  • 4.173 (6)
  • 4.1732 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 88.9 (2)
  • 106.0 (8)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Maximum Bore Depth
  • 70.0 (6)
to
Maximum Bore Depth
  • 2.756 (6)
to
frontEnd
Clamp Style
  • N (12)
Insert Shape
  • TN-TOP NOTCH (12)
Cutting Width
  • 1.0 (4)
  • 1.19 (2)
  • 1.194 (4)
  • 1.2 (4)
  • 1.5 (4)
  • 1.57 (4)
  • 1.575 (4)
  • 1.75 (4)
  • 1.829 (4)
  • 1.981 (4)
  • 2.0 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (2)
  • 2.25 (2)
  • 2.388 (4)
  • 2.39 (2)
  • 2.464 (4)
  • 2.5 (4)
  • 2.667 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.794 (4)
  • 2.997 (4)
  • 3.0 (8)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (8)
  • 3.18 (2)
  • 3.2 (8)
  • 3.25 (4)
  • 3.251 (4)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (8)
  • 3.607 (4)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (2)
  • 3.988 (4)
  • 4.0 (8)
  • 4.24 (2)
  • 4.242 (8)
  • 4.25 (2)
  • 4.3 (4)
  • 4.5 (8)
  • 4.521 (4)
  • 4.699 (6)
  • 4.775 (8)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (4)
  • 4.801 (8)
  • 4.81 (4)
  • 4.88 (2)
  • 4.95 (4)
  • 5.0 (4)
  • 5.004 (6)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.537 (2)
  • 5.563 (4)
  • 6.0 (6)
  • 6.35 (8)
  • 6.36 (2)
  • 6.48 (4)
  • 7.01 (2)
  • 7.137 (4)
  • 7.925 (4)
  • 8.001 (1)
  • 8.738 (2)
  • 8.992 (2)
  • 9.525 (4)
  • 9.65 (2)
  • 9.73 (1)
to
Cutting Width
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0689 (4)
  • 0.072 (4)
  • 0.078 (4)
  • 0.0787 (4)
  • 0.079 (1)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (2)
  • 0.094 (4)
  • 0.097 (4)
  • 0.0984 (4)
  • 0.105 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.11 (4)
  • 0.118 (4)
  • 0.1181 (8)
  • 0.122 (4)
  • 0.125 (8)
  • 0.126 (8)
  • 0.128 (4)
  • 0.131 (2)
  • 0.1378 (8)
  • 0.142 (4)
  • 0.156 (4)
  • 0.157 (4)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (2)
  • 0.169 (4)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (4)
  • 0.185 (6)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (2)
  • 0.195 (4)
  • 0.1969 (4)
  • 0.197 (6)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.218 (2)
  • 0.219 (4)
  • 0.2362 (6)
  • 0.25 (8)
  • 0.255 (4)
  • 0.276 (2)
  • 0.281 (4)
  • 0.312 (4)
  • 0.315 (1)
  • 0.344 (2)
  • 0.354 (2)
  • 0.375 (4)
  • 0.38 (2)
  • 0.383 (1)
to
Insert Size
  • 3 (4)
  • 4 (4)
  • 5 (2)
  • 6 (2)
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (4)
  • C N (8)
  • D P (6)
  • H T (8)
  • H W (12)
backEnd
Back-End Diameter
  • 3.1496 (12)
to
Back-End Diameter
  • 80.0 (12)
to
other
Platform
  • KM80 (8)
Tool Unit
  • I (8)
  • M (12)
Over All Length [L]
  • 70.0 (12)
to
Over All Length [L]
  • 2.7559 (6)
  • 2.756 (6)
to
Insert Hand
  • L (6)
  • R (6)
Cutting Condition Material
  • H-All (12)
  • K-All (12)
  • M-All (12)
  • N-All (12)
  • P-All (12)
  • S-All (12)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM80ATC™ Schneidköpfe

(8 Products)
  • Schaft –  KM-ATCSchaft – KM-ATC
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
1961333 KM80ATCNEL3 KM80ATCNEL3 70.0000 2.756 53.0000 2.086 106.0000 4.173 NG3R 2.12 4.67
    1960915 KM80ATCNEL4 KM80ATCNEL4 70.0000 2.756 53.0000 2.086 106.0000 4.173 NG4R 2.19 4.83
      2036400 KM80ATCNEL5 KM80ATCNEL5 70.0000 2.755 53.0000 2.086 106.0000 4.173 NG5R 2.26 4.99
        2036398 KM80ATCNEL6 KM80ATCNEL6 70.0000 2.756 53.0000 2.086 106.0000 4.173 NG6R 2.15 4.74
          2036394 KM80ATCNER3 KM80ATCNER3 70.0000 2.756 53.0000 2.086 106.0000 4.173 NG3L 2.12 4.67
            2036395 KM80ATCNER4 KM80ATCNER4 70.0000 2.756 53.0000 2.086 106.0000 4.173 NG4L 2.19 4.83
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM80ATC™ Schneidköpfe

              (4 Products)
              • Schaft –  KM-ATCSchaft – KM-ATC
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              2398753 KM80ATCNSL3 KM80ATCNSL3 70.0000 2.755 53.0000 2.086 NG3L 2.16 4.77
                2044321 KM80ATCNSL4 KM80ATCNSL4 70.0000 2.755 53.0000 2.086 NG4L 2.17 4.77
                  3330949 KM80ATCNSR3 KM80ATCNSR3 70.0000 2.755 53.0000 2.086 NG3R 2.16 4.77
                    2203622 KM80ATCNSR4 KM80ATCNSR4 70.0000 2.755 53.0000 2.086 NG4R 2.17 4.77
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart