successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

M-Klemmung

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (13)
    • N6
      Carbon, Graphite Composites, CFRP
      (13)
    • N7
      MMC's
      (13)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Chamfer Turning Chamfer Turning (22)
  • Facing Facing (24)
  • Multiple Direction Cutting Multiple Direction Cutting (24)
  • Plunge Turning Plunge Turning (22)
  • Profiling Profiling (22)
  • TRN Boring TRN Boring (13)
  • Turning Turning (24)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (11)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (16)
  • 93.0 (2)
  • 95.0 (4)
to
Connection Style
  • KM (22)
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (14)
  • 4.0 (24)
  • 8.0 (24)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (2)
  • 0.2 (2)
  • 0.203 (2)
  • 0.397 (2)
  • 0.4 (2)
  • 0.794 (2)
  • 0.8 (13)
  • 1.191 (7)
  • 1.2 (13)
  • 1.588 (11)
  • 1.6 (22)
  • 2.381 (11)
  • 2.4 (22)
  • 3.2 (10)
  • 4.0 (5)
to
Corner Radius
  • 0.004 (2)
  • 0.008 (2)
  • 0.0156 (2)
  • 0.016 (2)
  • 0.031 (8)
  • 0.0312 (2)
  • 0.0313 (13)
  • 0.0469 (13)
  • 0.047 (11)
  • 0.0625 (22)
  • 0.063 (11)
  • 0.0928 (6)
  • 0.0938 (22)
  • 0.094 (10)
  • 0.125 (5)
  • 0.126 (5)
  • 0.1575 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (8)
  • CL4 (11)
  • CM2 (7)
  • CM3 (11)
  • CPX (11)
  • CW2015 (8)
  • CW5025 (8)
  • GX (11)
  • HK1500 (6)
  • K090 (13)
  • K1 (16)
  • K10M (13)
  • K10P (2)
  • K10U (2)
  • K15U (2)
  • K20K (13)
  • K21 (11)
  • K25M (2)
  • K25P (7)
  • K313 (13)
  • K35P (5)
  • K420 (18)
  • K45 (2)
  • K68 (13)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KBH10 (2)
  • KBH10B (2)
  • KBH20 (2)
  • KBH20B (2)
  • KC210 (11)
  • KC250 (11)
  • KC5010 (24)
  • KC5025 (13)
  • KC5410 (13)
  • KC5510 (13)
  • KC720 (7)
  • KC730 (13)
  • KC7310 (13)
  • KC732 (2)
  • KC8050 (24)
  • KC810 (13)
  • KC850 (24)
  • KC9010 (13)
  • KC9025 (24)
  • KC910 (13)
  • KC9105 (8)
  • KC9110 (24)
  • KC9120 (24)
  • KC9125 (24)
  • KC9140 (24)
  • KC9145 (22)
  • KC9215 (13)
  • KC9225 (13)
  • KC9240 (24)
  • KC9240NEW (18)
  • KC9245 (13)
  • KC9315 (13)
  • KC9320 (13)
  • KC9325 (13)
  • KC935 (19)
  • KC950 (18)
  • KC990 (18)
  • KCK05 (13)
  • KCK05B (13)
  • KCK15 (13)
  • KCK15B (13)
  • KCK20 (13)
  • KCK20B (19)
  • KCM15 (13)
  • KCM15B (8)
  • KCM25 (18)
  • KCM25B (18)
  • KCM35 (13)
  • KCM35B (11)
  • KCP05 (2)
  • KCP05B (7)
  • KCP10 (24)
  • KCP10B (18)
  • KCP25 (24)
  • KCP25B (24)
  • KCP30 (24)
  • KCP30B (22)
  • KCP40 (22)
  • KCP40B (22)
  • KCPK05 (13)
  • KCS10B (13)
  • KCU10 (24)
  • KCU25 (13)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KM1 (5)
  • KT1120 (2)
  • KT125 (2)
  • KT150 (2)
  • KT175 (2)
  • KT315 (2)
  • KT5020 (2)
  • KU10T (2)
  • KU30T (13)
  • KY1320 (8)
  • KY1540 (6)
  • KY1615 (8)
  • KY2000 (6)
  • KY3000 (13)
  • KY3400 (11)
  • KY3500 (13)
  • KY4000 (2)
  • KY4300 (6)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (6)
  • KYK35 (13)
  • KYS25 (6)
  • KYS30 (6)
  • NL250 (13)
  • NL300 (22)
  • NL400 (11)
  • NL920 (6)
  • SP0819 (11)
  • SP3019 (11)
  • SP4019 (6)
  • SP4036 (2)
  • SP4093 (2)
  • SPADAP (22)
  • SPN4W2 (5)
  • THM (11)
  • TN10P (8)
  • TN10U (2)
  • TN15M (13)
  • TN15U (2)
  • TN2000 (11)
  • TN20K (13)
  • TN20P (13)
  • TN30M (13)
  • TN30P (17)
  • TN4000 (11)
  • TN5015 (11)
  • TN5020 (11)
  • TN5120 (11)
  • TN6010 (2)
  • TN7010 (11)
  • TN7015 (22)
  • TN7025 (22)
  • TN7035 (11)
  • TN7110 (6)
  • TN7115 (22)
  • TN7125 (22)
  • TN7135 (11)
  • TN8025 (22)
  • TTM09 (5)
  • TTR-X (5)
  • TTS (11)
  • W00342 (5)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH30P (2)
  • WDN25U (2)
  • WK05CT (13)
  • WK20CT (13)
  • WM15CT (13)
  • WM25CT (18)
  • WM35CT (13)
  • WP15CT (24)
  • WP25CT (24)
  • WP35CT (24)
  • WS10PT (13)
  • WS25PT (13)
  • WU10HT (8)
Hand Of Tool
  • L (10)
  • N (2)
  • R (10)
Wiper Insert
  • N (24)
  • Y (4)
Minimum Axial Groove Diameter
  • 4.173 (13)
  • 4.1732 (1)
to
Minimum Axial Groove Diameter
  • 106.0 (14)
to
Cutting Direction
  • B (4)
  • E (8)
  • S (10)
Rake Angle Style
  • DOUBLE NEGATIVE (20)
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
  • 70.0 (13)
to
Maximum Bore Depth
  • 2.756 (13)
to
frontEnd
Clamp Style
  • M (24)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • S-SQUARE 90 (10)
  • V-DIAMOND/RHOMBIC 35 (2)
insertGeometry
Cutting Tool Material
  • B H (2)
  • B L (2)
  • C A (13)
  • C N (13)
  • D P (2)
  • H T (2)
  • H W (24)
backEnd
Connection Type
  • TAPER SHANK (22)
System Size
  • KM80ATC (22)
Back-End Diameter
  • 3.1496 (24)
to
Back-End Diameter
  • 80.0 (24)
to
other
Platform
  • KM80 (24)
Tool Unit
  • I (22)
  • M (24)
Over All Length [L]
  • 70.0 (24)
to
Over All Length [L]
  • 2.7559 (11)
  • 2.756 (13)
to
Insert Hand
  • N (24)
Display Obsolete Products
  • true (24)
  • false (23)
Cutting Condition Material
  • H-All (8)
  • K-All (24)
  • M-All (18)
  • N-All (13)
  • P-All (24)
  • S-All (18)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
KM80ATC™ Schneidköpfe

M-Klemmung
(4 Products)
  • Schaft –  KM-ATCSchaft – KM-ATC
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
1961291 KM80ATCMCKNL19 KM80ATCMCKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.41 5.30
    3684524 KM80ATCMCKNL25 KM80ATCMCKNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.54 5.61
      2036393 KM80ATCMCKNR19 KM80ATCMCKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.40 5.30
        3758113 KM80ATCMCKNR25 KM80ATCMCKNR25 70.0000 2.755 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.54 5.61
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM80ATC™ Schneidköpfe

          M-Klemmung
          (4 Products)
          • Schaft –  KM-ATCSchaft – KM-ATC
          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          1958408 KM80ATCMCLNL19 KM80ATCMCLNL19 70.0000 2.756 53.0000 2.087 106.0000 4.173 CN..190612/CN..643 2.19 4.83
            1958411 KM80ATCMCLNL25 KM80ATCMCLNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.20 4.84
              2036373 KM80ATCMCLNR19 KM80ATCMCLNR19 70.0000 2.756 53.0000 2.087 106.0000 4.173 CN..190612/CN..643 2.19 4.83
                2036374 KM80ATCMCLNR25 KM80ATCMCLNR25 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.20 4.84
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  KM80ATC™ Schneidköpfe

                  M-Klemmung
                  (4 Products)
                  • Schaft –  KM-ATCSchaft – KM-ATC
                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  1960916 KM80ATCMCRNL19 KM80ATCMCRNL19 70.0000 2.755 48.0000 1.889 CN..190612/CN..643 2.29 5.06
                    2033887 KM80ATCMCRNL25 KM80ATCMCRNL25 70.0000 2.755 48.0000 1.889 CN..250924/CN..866 2.31 5.09
                      2036375 KM80ATCMCRNR19 KM80ATCMCRNR19 70.0000 2.755 48.0000 1.889 CN..190612/CN..643 2.29 5.06
                        2036376 KM80ATCMCRNR25 KM80ATCMCRNR25 70.0000 2.755 48.0000 1.889 CN..250924/CN..866 2.31 5.09
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          KM80ATC™ Schneidköpfe

                          M-Klemmung
                          (2 Products)
                          • Schaft –  KM-ATCSchaft – KM-ATC
                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                          2036383 KM80ATCMSDNN19 KM80ATCMSDNN19 70.0000 2.755 0.0000 .0000 SN..190612/SN..643 1.88 4.14
                            2036384 KM80ATCMSDNN25 KM80ATCMSDNN25 70.0000 2.755 0.0000 .0000 SN..250924/SN..866 1.79 3.95
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty
                              KM80ATC™ Schneidköpfe

                              M-Klemmung
                              (4 Products)
                              • Schaft –  KM-ATCSchaft – KM-ATC
                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                              2036386 KM80ATCMSKNL19 KM80ATCMSKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190612/SN..643 2.52 5.55
                                1960917 KM80ATCMSKNL25 KM80ATCMSKNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.53 5.57
                                  2036385 KM80ATCMSKNR19 KM80ATCMSKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190612/SN..643 2.52 5.55
                                    2036387 KM80ATCMSKNR25 KM80ATCMSKNR25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.44
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      KM80ATC™ Schneidköpfe

                                      M-Klemmung
                                      (4 Products)
                                      • Schaft –  KM-ATCSchaft – KM-ATC
                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                      2036389 KM80ATCMSRNL19 KM80ATCMSRNL19 70.0000 2.755 48.0000 1.889 SN..190612/SN..643 2.11 4.66
                                        1961718 KM80ATCMSRNL25 KM80ATCMSRNL25 70.0000 2.755 48.0000 1.889 SN..250924/SN..866 2.08 4.59
                                          2036388 KM80ATCMSRNR19 KM80ATCMSRNR19 70.0000 2.755 48.0000 1.889 SN..190612/SN..643 2.11 4.66
                                            2036390 KM80ATCMSRNR25 KM80ATCMSRNR25 70.0000 2.755 48.0000 1.889 SN..250924/SN..866 2.08 4.59
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty
                                              KM80ATC™ Schneidköpfe

                                              M-Klemmung • P-Klemmung
                                              (2 Products)
                                              • Schaft –  KM-ATCSchaft – KM-ATC
                                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                              1961335 KM80ATCMVUNL16 KM80ATCMVUNL16 70.0000 2.756 53.0000 2.086 106.0000 4.173 VN..160408/VN..332 2.23 4.92
                                                2036391 KM80ATCMVUNR16 KM80ATCMVUNR16 70.0000 2.756 53.0000 2.086 106.0000 4.173 VN..160408/VN..332 2.23 4.92
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                  You are about to create a duplicate . Do you want to proceed?
                                                  You are about to delete Do you want to proceed?
                                                  What would you like to rename your to?
                                                  Please enter a valid name
                                                  Please enter a name for the duplicate
                                                  Please enter a valid name
                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                  Please enter a valid name
                                                  Send a copy of

                                                  Please enter a valid Email
                                                  Please enter a valid name

                                                  We have found the following CAD Drawings

                                                  Select the files you are looking for and download them all at once

                                                  You should be logged to see your dashboard information
                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                  item(s) successfully added to the cart
                                                  View Cart