Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

TopThread™ und TopGroove™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
    • N6
      Carbon, Graphite Composites, CFRP
      (2)
    • N7
      MMC's
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
  • Back Boring Back Boring (1)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (1)
  • Blind Hole Finishing Blind Hole Finishing (1)
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (2)
  • Grooving Grooving (2)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (1)
  • OD Thread Turning OD Thread Turning (2)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (1)
  • TRN Boring TRN Boring (1)
  • Threading Threading (1)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (1)
  • Through Hole Finishing Through Hole Finishing (1)
  • Turning Turning (2)
Type of Thread
  • 60 (2)
  • ACME (2)
  • API (2)
  • API RD (2)
  • BSW (2)
  • BUTTRESS (2)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (2)
  • UNJ (2)
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (2)
  • Smooth Cut (2)
  • Varying Depth of Cut (2)
Tool Cutting Edge Angle
  • 90.0 (2)
to
Connection Style
  • KM (2)
Cutting Edges Per Insert
  • 1.0 (2)
  • 2.0 (2)
to
cornerConfiguration
Corner Radius
  • 0.026 (1)
  • 0.051 (1)
  • 0.057 (1)
  • 0.066 (2)
  • 0.076 (2)
  • 0.08 (2)
  • 0.089 (1)
  • 0.09 (1)
  • 0.094 (2)
  • 0.097 (1)
  • 0.1 (2)
  • 0.102 (2)
  • 0.116 (1)
  • 0.117 (1)
  • 0.127 (2)
  • 0.131 (2)
  • 0.132 (2)
  • 0.133 (2)
  • 0.15 (2)
  • 0.155 (2)
  • 0.157 (2)
  • 0.165 (2)
  • 0.173 (2)
  • 0.178 (2)
  • 0.19 (2)
  • 0.191 (2)
  • 0.198 (2)
  • 0.2 (2)
  • 0.202 (2)
  • 0.224 (2)
  • 0.235 (2)
  • 0.244 (1)
  • 0.25 (2)
  • 0.251 (2)
  • 0.254 (2)
  • 0.255 (1)
  • 0.269 (2)
  • 0.282 (2)
  • 0.284 (2)
  • 0.3 (2)
  • 0.315 (2)
  • 0.318 (2)
  • 0.33 (2)
  • 0.34 (2)
  • 0.343 (1)
  • 0.356 (2)
  • 0.404 (2)
  • 0.406 (2)
  • 0.43 (2)
  • 0.445 (2)
  • 0.472 (1)
  • 0.49 (2)
  • 0.508 (2)
  • 0.57 (1)
  • 0.572 (2)
  • 0.575 (1)
  • 0.787 (2)
  • 0.902 (2)
  • 1.0 (2)
  • 1.194 (2)
  • 1.195 (1)
  • 1.25 (2)
  • 1.5 (2)
  • 1.585 (2)
  • 1.588 (2)
  • 1.75 (2)
  • 1.98 (1)
  • 1.981 (2)
  • 2.0 (2)
  • 2.25 (2)
  • 2.388 (2)
to
Corner Radius
  • 0.002 (1)
  • 0.0023 (1)
  • 0.0026 (2)
  • 0.003 (2)
  • 0.0031 (2)
  • 0.0035 (1)
  • 0.0037 (2)
  • 0.0038 (1)
  • 0.004 (2)
  • 0.0046 (2)
  • 0.005 (2)
  • 0.0052 (2)
  • 0.0053 (2)
  • 0.0059 (2)
  • 0.006 (2)
  • 0.0062 (2)
  • 0.0065 (2)
  • 0.0068 (2)
  • 0.007 (2)
  • 0.0075 (2)
  • 0.0078 (2)
  • 0.0079 (1)
  • 0.008 (2)
  • 0.0088 (2)
  • 0.0093 (2)
  • 0.0096 (1)
  • 0.0099 (2)
  • 0.01 (2)
  • 0.0106 (2)
  • 0.0111 (2)
  • 0.0112 (2)
  • 0.0118 (2)
  • 0.0124 (2)
  • 0.0125 (2)
  • 0.013 (2)
  • 0.0135 (2)
  • 0.014 (2)
  • 0.0159 (2)
  • 0.016 (2)
  • 0.017 (2)
  • 0.0175 (2)
  • 0.0186 (1)
  • 0.0193 (2)
  • 0.02 (2)
  • 0.0225 (2)
  • 0.031 (2)
  • 0.0355 (2)
  • 0.0394 (2)
  • 0.047 (2)
  • 0.0492 (2)
  • 0.0591 (2)
  • 0.0625 (2)
  • 0.0689 (2)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.0886 (2)
  • 0.094 (2)
  • 0.106 (1)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (2)
  • K313 (2)
  • K420 (2)
  • K4H (2)
  • K68 (2)
  • KB1345 (2)
  • KB1630 (2)
  • KB5625 (2)
  • KC250 (2)
  • KC5010 (2)
  • KC5025 (2)
  • KC5410 (2)
  • KC710 (2)
  • KC720 (2)
  • KC722 (2)
  • KC730 (2)
  • KC732 (2)
  • KC810 (2)
  • KC850 (2)
  • KC910 (2)
  • KC9110 (2)
  • KC9120 (2)
  • KC9320 (2)
  • KC935 (2)
  • KC950 (2)
  • KCK20 (2)
  • KCK20B (2)
  • KCP10B (2)
  • KCP25B (2)
  • KCU10 (2)
  • KCU25 (2)
  • KD050 (1)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1425 (2)
  • KT175 (2)
  • KT315 (2)
  • KU10T (2)
  • KU25T (2)
  • KU30T (2)
  • KY3000 (2)
  • THM (2)
  • TN10P (2)
  • TN6010 (2)
  • TN6025 (2)
  • TN7110 (2)
  • WU10HT (1)
  • WU25PT (1)
Hand Of Tool
  • L (1)
  • R (1)
Wiper Insert
  • N (2)
Minimum Axial Groove Diameter
  • 1.5748 (2)
to
Minimum Axial Groove Diameter
  • 40.0 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (2)
to
Maximum Axial Groove Diameter
  • 393.661 (2)
to
Cutting Direction
  • S (2)
Rake Angle Style
  • NEUTRAL (ZERO) (2)
Maximum Bore Depth
  • 112.07 (2)
to
Maximum Bore Depth
  • 4.4122 (2)
to
Boring Bar Material
  • S (2)
frontEnd
Clamp Style
  • N (2)
Insert Shape
  • TN-TOP NOTCH (2)
Cutting Width
  • 1.0 (2)
  • 1.19 (1)
  • 1.194 (2)
  • 1.2 (2)
  • 1.5 (2)
  • 1.57 (2)
  • 1.575 (2)
  • 1.75 (2)
  • 1.829 (2)
  • 1.981 (2)
  • 2.0 (2)
  • 2.2 (2)
  • 2.235 (2)
  • 2.24 (1)
  • 2.25 (1)
  • 2.388 (2)
  • 2.39 (1)
  • 2.464 (2)
  • 2.5 (2)
  • 2.667 (2)
  • 2.743 (2)
  • 2.75 (2)
  • 2.794 (2)
  • 2.997 (2)
  • 3.0 (2)
  • 3.099 (2)
  • 3.17 (2)
  • 3.175 (2)
  • 3.2 (2)
  • 3.25 (2)
  • 3.251 (2)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (2)
  • 3.607 (2)
  • 3.96 (2)
  • 3.962 (2)
  • 3.974 (1)
  • 3.988 (2)
  • 4.0 (2)
  • 4.24 (1)
  • 4.242 (2)
  • 4.25 (1)
  • 4.3 (2)
  • 4.5 (2)
  • 4.521 (2)
  • 4.699 (2)
  • 4.775 (2)
  • 4.8 (2)
  • 4.801 (2)
  • 4.81 (2)
  • 4.88 (1)
  • 4.95 (2)
to
Cutting Width
  • 0.0394 (2)
  • 0.047 (2)
  • 0.0472 (2)
  • 0.0591 (2)
  • 0.062 (2)
  • 0.0689 (2)
  • 0.072 (2)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.079 (1)
  • 0.0866 (2)
  • 0.088 (2)
  • 0.0886 (1)
  • 0.094 (2)
  • 0.097 (2)
  • 0.0984 (2)
  • 0.105 (2)
  • 0.108 (2)
  • 0.1083 (2)
  • 0.11 (2)
  • 0.118 (2)
  • 0.1181 (2)
  • 0.122 (2)
  • 0.125 (2)
  • 0.126 (2)
  • 0.128 (2)
  • 0.131 (1)
  • 0.1378 (2)
  • 0.142 (2)
  • 0.156 (2)
  • 0.157 (2)
  • 0.1574 (2)
  • 0.1575 (2)
  • 0.167 (2)
  • 0.1673 (1)
  • 0.169 (2)
  • 0.1771 (2)
  • 0.1772 (2)
  • 0.178 (2)
  • 0.185 (2)
  • 0.188 (2)
  • 0.189 (2)
  • 0.192 (1)
  • 0.195 (2)
to
Maximum Cutting Depth
  • 5.33 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
to
Insert Size
  • 3 (2)
insertGeometry
Cutting Tool Material
  • B H (2)
  • B L (2)
  • C N (2)
  • D P (2)
  • H T (2)
  • H W (2)
backEnd
Connection Type
  • TAPER SHANK (2)
System Size
  • KM63TS (2)
Back-End Diameter
  • 2.4803 (2)
to
Back-End Diameter
  • 63.0 (2)
to
other
Platform
  • KM63 (2)
Tool Unit
  • M (2)
Over All Length [L]
  • 140.0 (2)
to
Over All Length [L]
  • 5.5118 (2)
to
Insert Hand
  • L (1)
  • R (1)
obsoleteFacet
  • false (2)
  • true (2)
Cutting Condition Material
  • H-All (2)
  • K-All (2)
  • M-All (2)
  • N-All (2)
  • P-All (2)
  • S-All (2)
No filters matching ""
View Products in
Metric
Inch
KM63TS™ Schneidköpfe zur Innenbearbeitung (Stahlschaft)

(2 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2265370 KM63TSS32LNEL3 KM63TSS32LNEL3 32.0000 1.259 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 NG3R 1.34 2.95
    2265369 KM63TSS32LNER3 KM63TSS32LNER3 32.0000 1.259 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 NG3L 1.34 2.95
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor

      HILFE

      Chatten Sie mit einem Zerspanungsexperten.

      Von 8:00 Uhr bis 18:00 Uhr Eastern Standard Time

      Produkt

      E-Mail-Adresse

      +1 (888) 539 5145

      Bestellen

      E-Mail-Adresse

      +1 (800) 979 4342

      UNTERNEHMEN

      Arbeiten Sie in unserem Expertenteam

      Wir über uns

       

      UNSERE MARKEN

      DOWNLOADS

      SHOP

      WIDIA-Werbeartikel kaufen

      WIDIA-Produkte bei Amazon kaufen


       

       

       


      BLEIBEN SIE IN KONTAKT

       

      © 2021 WIDIA Product Group, Datenschutzrichtlinie

      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      Can’t find the file type you’re looking for?
      Request Drawings »

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart