successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

P-Spannung Innenbearbeitung

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (24)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (22)
    • H3
      Hardened Materials 56-60 HRC
      (22)
    • H4
      Hardened Materials >60 HRC
      (22)
Applications
  • Back Boring Back Boring (13)
  • Facing Facing (24)
  • Multiple Direction Cutting Multiple Direction Cutting (24)
  • Profiling Profiling (13)
  • TRN Boring TRN Boring (13)
  • Turning Turning (24)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (22)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
  • 93.0 (8)
  • 95.0 (16)
to
Cutting Edges Per Insert
  • 1.0 (22)
  • 2.0 (16)
  • 3.0 (8)
  • 4.0 (16)
  • 6.0 (8)
  • 8.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.1 (18)
  • 0.102 (14)
  • 0.2 (18)
  • 0.203 (8)
  • 0.34 (6)
  • 0.397 (24)
  • 0.4 (24)
  • 0.406 (6)
  • 0.41 (6)
  • 0.6 (8)
  • 0.792 (14)
  • 0.794 (24)
  • 0.8 (24)
  • 0.81 (6)
  • 1.19 (8)
  • 1.191 (24)
  • 1.2 (24)
  • 1.587 (8)
  • 1.588 (16)
  • 1.6 (22)
to
Corner Radius
  • 0.004 (24)
  • 0.008 (18)
  • 0.0083 (8)
  • 0.013 (6)
  • 0.0156 (24)
  • 0.016 (22)
  • 0.031 (24)
  • 0.0312 (24)
  • 0.0313 (24)
  • 0.0315 (8)
  • 0.032 (6)
  • 0.0469 (24)
  • 0.047 (22)
  • 0.0472 (8)
  • 0.0625 (22)
  • 0.063 (22)
  • 0.1563 (8)
  • 0.312 (6)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (14)
  • 241 (8)
  • CL4 (14)
  • CM2 (14)
  • CM3 (14)
  • CM4 (8)
  • CPX (14)
  • CW2 (14)
  • CW2015 (14)
  • CW5025 (22)
  • GX (8)
  • HK1500 (22)
  • HT2 (16)
  • HTX (8)
  • K060 (8)
  • K090 (14)
  • K1 (8)
  • K10M (22)
  • K10P (22)
  • K10U (16)
  • K15U (22)
  • K20K (22)
  • K21 (8)
  • K25M (24)
  • K25P (22)
  • K313 (24)
  • K35P (8)
  • K420 (8)
  • K45 (8)
  • K68 (14)
  • KB1340 (10)
  • KB1345 (8)
  • KB1610 (16)
  • KB1625 (8)
  • KB1630 (8)
  • KB5610 (16)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (22)
  • KB9640 (18)
  • KBH10 (22)
  • KBH10B (14)
  • KBH20 (22)
  • KBH20B (14)
  • KBK35 (8)
  • KC210 (14)
  • KC250 (8)
  • KC5010 (24)
  • KC5025 (24)
  • KC5410 (22)
  • KC5510 (24)
  • KC5525 (24)
  • KC710 (8)
  • KC720 (16)
  • KC722 (8)
  • KC730 (18)
  • KC7310 (24)
  • KC732 (16)
  • KC8050 (24)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (24)
  • KC9025 (24)
  • KC910 (22)
  • KC9105 (24)
  • KC9110 (24)
  • KC9120 (24)
  • KC9125 (24)
  • KC9140 (24)
  • KC9145 (22)
  • KC9210 (6)
  • KC9215 (24)
  • KC9225 (24)
  • KC9240 (24)
  • KC9240NEW (24)
  • KC9245 (24)
  • KC9315 (24)
  • KC9320 (24)
  • KC9325 (24)
  • KC935 (24)
  • KC950 (22)
  • KC990 (24)
  • KCK05 (24)
  • KCK05B (24)
  • KCK15 (24)
  • KCK15B (24)
  • KCK20 (24)
  • KCK20B (24)
  • KCM15 (24)
  • KCM15B (24)
  • KCM25 (24)
  • KCM25B (24)
  • KCM35 (22)
  • KCM35B (22)
  • KCP05 (24)
  • KCP05B (24)
  • KCP10 (24)
  • KCP10B (24)
  • KCP25 (24)
  • KCP25B (24)
  • KCP30 (24)
  • KCP30B (22)
  • KCP40 (22)
  • KCP40B (22)
  • KCPK05 (24)
  • KCS10 (8)
  • KCS10B (24)
  • KCU10 (24)
  • KCU25 (24)
  • KD050 (8)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1400 (16)
  • KD1405 (8)
  • KD1425 (16)
  • KM1 (8)
  • KMF (8)
  • KT1120 (8)
  • KT125 (14)
  • KT150 (8)
  • KT175 (14)
  • KT315 (24)
  • KT325 (16)
  • KU10T (24)
  • KU30T (24)
  • KY1310 (16)
  • KY1320 (22)
  • KY1540 (8)
  • KY1615 (14)
  • KY2000 (8)
  • KY2100 (8)
  • KY3000 (14)
  • KY3400 (16)
  • KY3500 (22)
  • KY4000 (8)
  • KY4300 (8)
  • KY4400 (22)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (22)
  • KYS25 (8)
  • KYS30 (16)
  • NL200 (14)
  • NL250 (24)
  • NL300 (14)
  • NL400 (16)
  • NL920 (22)
  • P25 (8)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • PS5 (16)
  • SP0819 (22)
  • SP3019 (16)
  • SP4019 (8)
  • THM (14)
  • THM-X (8)
  • THMF-X (8)
  • TN10P (24)
  • TN10U (22)
  • TN15M (22)
  • TN15U (22)
  • TN2000 (22)
  • TN20K (22)
  • TN20P (24)
  • TN30M (24)
  • TN30P (22)
  • TN4000 (22)
  • TN5015 (24)
  • TN5020 (24)
  • TN5105 (24)
  • TN5120 (24)
  • TN6010 (14)
  • TN6025 (22)
  • TN7005 (24)
  • TN7010 (24)
  • TN7015 (24)
  • TN7025 (24)
  • TN7035 (22)
  • TN7105 (24)
  • TN7110 (24)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (22)
  • TN8025 (24)
  • TTI15 (16)
  • TTR (8)
  • TTS (14)
  • TTX (14)
  • WBH10C (14)
  • WBH10P (8)
  • WBH10U (8)
  • WBH25P (8)
  • WBH25U (14)
  • WBH30P (8)
  • WBK40U (10)
  • WBK45U (14)
  • WDN00U (8)
  • WDN25U (16)
  • WK05CT (24)
  • WK15CT (22)
  • WK20CT (24)
  • WM15CT (24)
  • WM25CT (24)
  • WM35CT (24)
  • WP05CT (16)
  • WP15CT (24)
  • WP20TT (2)
  • WP25CT (24)
  • WP35CT (24)
  • WS10PT (24)
  • WS25PT (24)
  • WU10HT (24)
  • X00511 (8)
Wiper Insert
  • N (24)
  • Y (24)
Minimum Axial Groove Diameter
  • 1.26 (6)
  • 1.575 (6)
  • 1.969 (6)
  • 2.48 (6)
to
Minimum Axial Groove Diameter
  • 32.0 (6)
  • 40.0 (6)
  • 50.0 (7)
  • 63.0 (5)
to
Maximum Bore Depth
  • 88.23 (4)
  • 88.52 (2)
  • 112.07 (6)
  • 113.37 (1)
  • 117.14 (5)
  • 117.38 (1)
  • 149.4 (5)
to
Maximum Bore Depth
  • 3.474 (4)
  • 3.485 (2)
  • 4.412 (6)
  • 4.464 (1)
  • 4.612 (5)
  • 4.621 (1)
  • 5.866 (1)
  • 5.882 (4)
to
frontEnd
Clamp Style
  • P (24)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (8)
  • W-TRIGON 80 (8)
insertGeometry
Cutting Tool Material
  • B H (24)
  • B L (22)
  • C A (22)
  • C N (22)
  • D P (22)
  • H T (24)
  • H W (24)
backEnd
Back-End Diameter
  • 2.48 (24)
to
Back-End Diameter
  • 63.0 (24)
to
other
Platform
  • KM63 (22)
Tool Unit
  • M (24)
Over All Length [L]
  • 125.0 (6)
  • 140.0 (12)
  • 170.0 (6)
to
Over All Length [L]
  • 4.92 (6)
  • 5.512 (12)
  • 6.693 (6)
to
Insert Hand
  • N (24)
Cutting Condition Material
  • H-All (22)
  • K-All (24)
  • K1 (10)
  • M-All (24)
  • N-All (24)
  • P-All (24)
  • S-All (24)
  • S4 (8)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM63TS™ Schneidköpfe zur Innenbearbeitung

P-Clamping
(8 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2407962 KM63TSS25KPCLNL12 KM63TSS25KPCLNL12 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 CN..120408/CN..432 1.13 2.50
    2407961 KM63TSS25KPCLNR12 KM63TSS25KPCLNR12 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 CN..120408/CN..432 1.13 2.50
      2407964 KM63TSS32LPCLNL12 KM63TSS32LPCLNL12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CN..120408/CN..432 1.36 3.00
        2407963 KM63TSS32LPCLNR12 KM63TSS32LPCLNR12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CN..120408/CN..432 1.36 3.00
          2407966 KM63TSS40LPCLNL12 KM63TSS40LPCLNL12 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 CN..120408/CN..432 1.68 3.69
            2407965 KM63TSS40LPCLNR12 KM63TSS40LPCLNR12 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 CN..120408/CN..432 1.68 3.69
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM63TS™ Schneidköpfe zur Innenbearbeitung

              P-Clamping
              (8 Products)
              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              2257147 KM63TSS25KPDUNL11 KM63TSS25KPDUNL11 32.0000 1.260 17.0000 .6690 88.5200 3.485 125.0000 4.920 DN..110408/DN..332 1.13 2.50
                2407985 KM63TSS25KPDUNR11 KM63TSS25KPDUNR11 32.0000 1.260 17.0000 .6690 88.5200 3.485 125.0000 4.920 DN..110408/DN..332 1.13 2.50
                  2407987 KM63TSS32LPDUNL15 KM63TSS32LPDUNL15 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 DN..150608/DN..442 1.35 2.97
                    2407986 KM63TSS32LPDUNR15 KM63TSS32LPDUNR15 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 DN..150608/DN..442 1.35 2.97
                      2407989 KM63TSS40LPDUNL15 KM63TSS40LPDUNL15 50.0000 1.969 27.0000 1.063 113.3700 4.464 140.0000 5.512 DN..150608/DN..442 1.69 3.73
                        2407988 KM63TSS40LPDUNR15 KM63TSS40LPDUNR15 50.0000 1.969 27.0000 1.063 117.3800 4.621 140.0000 5.512 DN..150608/DN..442 1.70 3.75
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          KM63TS™ Schneidköpfe zur Innenbearbeitung

                          P-Clamping
                          (8 Products)
                          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                          2408040 KM63TSS25KPWLNL08 KM63TSS25KPWLNL08 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 WN..080408/WN..432 1.14 2.52
                            2408039 KM63TSS25KPWLNR08 KM63TSS25KPWLNR08 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 WN..080408/WN..432 1.14 2.52
                              2408042 KM63TSS32LPWLNL08 KM63TSS32LPWLNL08 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 WN..080408/WN..432 1.36 2.99
                                2408041 KM63TSS32LPWLNR08 KM63TSS32LPWLNR08 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 WN..080408/WN..432 1.36 2.99
                                  2408044 KM63TSS40LPWLNL08 KM63TSS40LPWLNL08 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 WN..080408/WN..432 1.67 3.67
                                    2408043 KM63TSS40LPWLNR08 KM63TSS40LPWLNR08 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 WN..080408/WN..432 1.67 3.67
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart