Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (64)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (64)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (64)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (64)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (64)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (64)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (64)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (64)
  • M Stainless Steel (64)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (64)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (64)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (64)
  • K Cast Iron (64)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (64)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (64)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (64)
  • N Non-Ferrous Materials (64)
    • N1
      Wrought Aluminum
      (64)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (64)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (56)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (64)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (64)
    • N6
      Carbon, Graphite Composites, CFRP
      (62)
    • N7
      MMC's
      (64)
  • S High-Temp Alloys (64)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (64)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (64)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (64)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (64)
  • H Hardened Materials (62)
    • H1
      Hardened Materials 44-48 HRC
      (62)
    • H2
      Hardened Materials 48-55 HRC
      (62)
    • H3
      Hardened Materials 56-60 HRC
      (62)
    • H4
      Hardened Materials >60 HRC
      (62)
Applications
  • Back Boring Back Boring (48)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (1)
  • Blind Hole Finishing Blind Hole Finishing (1)
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (64)
  • Grooving Grooving (2)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (63)
  • OD Thread Turning OD Thread Turning (2)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (48)
  • TRN Boring TRN Boring (48)
  • Threading Threading (1)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (1)
  • Through Hole Finishing Through Hole Finishing (1)
  • Turning Turning (64)
Type of Thread
  • 60 (2)
  • ACME (2)
  • API (2)
  • API RD (2)
  • BSW (2)
  • BUTTRESS (2)
  • M (2)
  • NPT (2)
  • STUB ACME (2)
  • UN (2)
  • UNJ (2)
Cutting Condition
  • Heavily Interrupted Cut (64)
  • Interrupted (54)
  • Lightly Interrupted Cut (64)
  • Smooth Cut (64)
  • Varying Depth of Cut (64)
Tool Cutting Edge Angle
  • 90.0 (4)
  • 93.0 (26)
  • 95.0 (34)
to
Connection Style
  • KM (64)
Cutting Edges Per Insert
  • 1.0 (60)
  • 2.0 (54)
  • 3.0 (10)
  • 4.0 (50)
  • 6.0 (8)
  • 8.0 (24)
to
cornerConfiguration
Corner Radius
  • 0.026 (1)
  • 0.03 (2)
  • 0.038 (3)
  • 0.051 (1)
  • 0.057 (1)
  • 0.066 (2)
  • 0.076 (2)
  • 0.08 (2)
  • 0.089 (1)
  • 0.09 (1)
  • 0.094 (2)
  • 0.097 (1)
  • 0.1 (57)
  • 0.102 (48)
  • 0.116 (1)
  • 0.117 (1)
  • 0.127 (2)
  • 0.131 (2)
  • 0.132 (2)
  • 0.133 (2)
  • 0.15 (2)
  • 0.155 (2)
  • 0.157 (2)
  • 0.165 (2)
  • 0.173 (2)
  • 0.178 (2)
  • 0.19 (2)
  • 0.191 (2)
  • 0.198 (2)
  • 0.2 (58)
  • 0.202 (2)
  • 0.203 (42)
  • 0.224 (2)
  • 0.235 (2)
  • 0.244 (1)
  • 0.25 (2)
  • 0.251 (2)
  • 0.254 (2)
  • 0.255 (1)
  • 0.269 (2)
  • 0.282 (2)
  • 0.284 (2)
  • 0.3 (2)
  • 0.315 (2)
  • 0.318 (2)
  • 0.33 (2)
  • 0.34 (8)
  • 0.343 (1)
  • 0.356 (2)
  • 0.394 (1)
  • 0.397 (60)
  • 0.4 (62)
  • 0.404 (2)
  • 0.406 (24)
  • 0.43 (2)
  • 0.445 (2)
  • 0.472 (1)
  • 0.49 (2)
  • 0.508 (2)
  • 0.57 (1)
  • 0.572 (2)
  • 0.575 (1)
  • 0.6 (8)
  • 0.787 (2)
  • 0.792 (30)
  • 0.794 (62)
  • 0.8 (62)
  • 0.902 (2)
  • 1.0 (2)
  • 1.19 (24)
  • 1.191 (58)
  • 1.194 (2)
  • 1.195 (1)
  • 1.2 (62)
  • 1.25 (2)
  • 1.5 (2)
  • 1.585 (2)
  • 1.587 (24)
  • 1.588 (50)
  • 1.6 (54)
  • 1.75 (2)
  • 1.98 (1)
  • 1.981 (2)
  • 2.0 (2)
  • 2.25 (2)
  • 2.381 (16)
  • 2.388 (2)
to
Corner Radius
  • 0.001 (2)
  • 0.0015 (3)
  • 0.002 (1)
  • 0.0023 (1)
  • 0.0026 (2)
  • 0.003 (2)
  • 0.0031 (2)
  • 0.0035 (1)
  • 0.0037 (2)
  • 0.0038 (1)
  • 0.004 (63)
  • 0.0046 (2)
  • 0.005 (2)
  • 0.0052 (2)
  • 0.0053 (2)
  • 0.0059 (2)
  • 0.006 (2)
  • 0.0062 (2)
  • 0.0065 (2)
  • 0.0068 (2)
  • 0.007 (2)
  • 0.0075 (2)
  • 0.0078 (4)
  • 0.0079 (3)
  • 0.008 (58)
  • 0.0083 (24)
  • 0.0088 (2)
  • 0.0093 (2)
  • 0.0096 (1)
  • 0.0099 (2)
  • 0.01 (2)
  • 0.0106 (2)
  • 0.0111 (2)
  • 0.0112 (2)
  • 0.0118 (2)
  • 0.0124 (2)
  • 0.0125 (2)
  • 0.013 (8)
  • 0.0135 (2)
  • 0.014 (2)
  • 0.0155 (1)
  • 0.0156 (62)
  • 0.0158 (3)
  • 0.0159 (2)
  • 0.016 (58)
  • 0.017 (2)
  • 0.0175 (2)
  • 0.0186 (1)
  • 0.0193 (2)
  • 0.02 (2)
  • 0.0225 (2)
  • 0.031 (58)
  • 0.0312 (62)
  • 0.0313 (62)
  • 0.0315 (28)
  • 0.0355 (2)
  • 0.0394 (2)
  • 0.0469 (62)
  • 0.047 (59)
  • 0.0472 (26)
  • 0.0492 (2)
  • 0.0591 (2)
  • 0.0625 (56)
  • 0.063 (38)
  • 0.0689 (2)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.0886 (2)
  • 0.0938 (16)
  • 0.094 (2)
  • 0.106 (1)
  • 0.1563 (24)
  • 0.312 (6)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (46)
  • 241 (24)
  • CG5 (1)
  • CL4 (30)
  • CM1 (1)
  • CM2 (46)
  • CM3 (30)
  • CM4 (24)
  • CPX (46)
  • CW2 (30)
  • CW2015 (46)
  • CW5025 (54)
  • GH1 (2)
  • GX (24)
  • HCK10 (4)
  • HK1500 (40)
  • HK35 (4)
  • HT2 (37)
  • HTX (29)
  • HWK15 (4)
  • K060 (40)
  • K090 (46)
  • K1 (24)
  • K1010P (2)
  • K10M (59)
  • K10P (57)
  • K10U (51)
  • K15U (57)
  • K20K (59)
  • K21 (24)
  • K25M (56)
  • K25P (54)
  • K2885 (2)
  • K313 (64)
  • K35P (24)
  • K420 (44)
  • K45 (40)
  • K4H (2)
  • K68 (54)
  • KB1340 (26)
  • KB1345 (46)
  • KB1610 (50)
  • KB1625 (44)
  • KB1630 (44)
  • KB5610 (51)
  • KB5625 (46)
  • KB5630 (42)
  • KB9610 (58)
  • KB9640 (34)
  • KBH10 (56)
  • KBH10B (46)
  • KBH20 (59)
  • KBH20B (46)
  • KBK35 (24)
  • KC210 (46)
  • KC250 (42)
  • KC5010 (64)
  • KC5020P (2)
  • KC5025 (64)
  • KC5410 (62)
  • KC5510 (56)
  • KC5525 (56)
  • KC710 (26)
  • KC720 (56)
  • KC722 (26)
  • KC730 (58)
  • KC7310 (56)
  • KC732 (56)
  • KC8050 (62)
  • KC810 (64)
  • KC850 (64)
  • KC9010 (59)
  • KC9025 (62)
  • KC910 (62)
  • KC9105 (62)
  • KC9110 (64)
  • KC9120 (62)
  • KC9125 (62)
  • KC9140 (56)
  • KC9145 (54)
  • KC9210 (6)
  • KC9215 (56)
  • KC9225 (62)
  • KC9240 (62)
  • KC9240NEW (62)
  • KC9245 (56)
  • KC9315 (62)
  • KC9320 (64)
  • KC9325 (62)
  • KC935 (64)
  • KC950 (60)
  • KC990 (60)
  • KCD25 (22)
  • KCK05 (62)
  • KCK05B (59)
  • KCK15 (62)
  • KCK15B (62)
  • KCK20 (64)
  • KCK20B (64)
  • KCM15 (62)
  • KCM15B (60)
  • KCM25 (62)
  • KCM25B (62)
  • KCM35 (60)
  • KCM35B (41)
  • KCP05 (62)
  • KCP05B (56)
  • KCP10 (62)
  • KCP10B (64)
  • KCP25 (62)
  • KCP25B (64)
  • KCP30 (62)
  • KCP30B (56)
  • KCP40 (54)
  • KCP40B (54)
  • KCPK05 (56)
  • KCS10 (30)
  • KCS10B (61)
  • KCU10 (64)
  • KCU25 (64)
  • KD050 (41)
  • KD081 (42)
  • KD100 (42)
  • KD120 (42)
  • KD1400 (52)
  • KD1405 (40)
  • KD1425 (54)
  • KM1 (24)
  • KMF (24)
  • KT1120 (24)
  • KT125 (48)
  • KT150 (40)
  • KT175 (50)
  • KT315 (64)
  • KT325 (37)
  • KTP10 (20)
  • KU10 (2)
  • KU10T (64)
  • KU25T (2)
  • KU30T (64)
  • KY1310 (48)
  • KY1320 (54)
  • KY1540 (40)
  • KY1615 (46)
  • KY2000 (40)
  • KY2100 (40)
  • KY3000 (48)
  • KY3400 (48)
  • KY3500 (54)
  • KY4000 (24)
  • KY4300 (40)
  • KY4400 (54)
  • KYHK15B (54)
  • KYK10 (48)
  • KYK25 (48)
  • KYK35 (54)
  • KYS25 (40)
  • KYS30 (48)
  • NL200 (30)
  • NL250 (56)
  • NL300 (32)
  • NL400 (32)
  • NL920 (56)
  • P25 (24)
  • PB100 (27)
  • PB170 (27)
  • PB250 (29)
  • PB300 (24)
  • PD100 (4)
  • PD50 (4)
  • PS5 (32)
  • SP0819 (38)
  • SP0PW3 (2)
  • SP3019 (32)
  • SP4019 (26)
  • THM (31)
  • THM-X (32)
  • THMF-X (24)
  • TN10P (63)
  • TN10U (59)
  • TN15M (59)
  • TN15U (57)
  • TN2000 (42)
  • TN20K (59)
  • TN20P (61)
  • TN30M (61)
  • TN30P (54)
  • TN4000 (38)
  • TN5015 (45)
  • TN5020 (45)
  • TN5105 (61)
  • TN5120 (61)
  • TN6010 (53)
  • TN6025 (43)
  • TN7005 (59)
  • TN7010 (61)
  • TN7015 (61)
  • TN7025 (61)
  • TN7035 (43)
  • TN7105 (45)
  • TN7110 (47)
  • TN7115 (61)
  • TN7125 (45)
  • TN7135 (43)
  • TN8025 (61)
  • TTI15 (34)
  • TTM09 (1)
  • TTR (29)
  • TTS (30)
  • TTX (32)
  • W00160 (1)
  • W00342 (4)
  • WBH10C (48)
  • WBH10P (42)
  • WBH10U (42)
  • WBH25P (42)
  • WBH25U (49)
  • WBH30P (42)
  • WBK40U (26)
  • WBK45U (51)
  • WDN00U (40)
  • WDN25U (52)
  • WK05CT (61)
  • WK15CT (43)
  • WK20CT (62)
  • WM15CT (61)
  • WM25CT (62)
  • WM35CT (56)
  • WP05CT (32)
  • WP15CT (62)
  • WP20TT (4)
  • WP25CT (62)
  • WP35CT (60)
  • WS10PT (61)
  • WS25PT (59)
  • WU10HT (62)
  • WU25PT (1)
  • X00511 (24)
Hand Of Tool
  • L (32)
  • R (32)
Wiper Insert
  • N (64)
  • Y (60)
Minimum Axial Groove Diameter
  • 1.2598 (6)
  • 1.26 (8)
  • 1.5748 (11)
  • 1.575 (7)
  • 1.9685 (10)
  • 1.969 (8)
  • 2.48 (6)
  • 2.4803 (8)
to
Minimum Axial Groove Diameter
  • 32.0 (14)
  • 40.0 (18)
  • 50.0 (19)
  • 63.0 (13)
to
Maximum Axial Groove Diameter
  • 9999.0 (2)
to
Maximum Axial Groove Diameter
  • 393.661 (2)
to
Cutting Direction
  • B (34)
  • E (28)
  • S (2)
Rake Angle Style
  • DOUBLE NEGATIVE (56)
  • NEGATIVE-ZERO (6)
  • NEUTRAL (ZERO) (2)
Maximum Bore Depth
  • 45.17 (2)
  • 50.45 (2)
  • 62.07 (4)
  • 77.14 (4)
  • 88.23 (8)
  • 88.52 (2)
  • 104.4 (4)
  • 112.07 (12)
  • 112.22 (2)
  • 113.37 (1)
  • 117.14 (13)
  • 117.38 (1)
  • 149.4 (9)
to
Maximum Bore Depth
  • 1.778 (2)
  • 1.986 (2)
  • 2.444 (4)
  • 3.037 (4)
  • 3.474 (8)
  • 3.485 (2)
  • 4.11 (4)
  • 4.412 (10)
  • 4.4122 (2)
  • 4.418 (2)
  • 4.464 (1)
  • 4.612 (13)
  • 4.621 (1)
  • 5.866 (1)
  • 5.882 (8)
to
Boring Bar Material
  • S (64)
frontEnd
Clamp Style
  • M (32)
  • N (2)
  • P (24)
  • S (6)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • D-DIAMOND/RHOMBIC 55 (26)
  • T-TRIANGLE 60 (2)
  • TN-TOP NOTCH (2)
  • W-TRIGON 80 (8)
Cutting Width
  • 1.0 (2)
  • 1.19 (1)
  • 1.194 (2)
  • 1.2 (2)
  • 1.5 (2)
  • 1.57 (2)
  • 1.575 (2)
  • 1.75 (2)
  • 1.829 (2)
  • 1.981 (2)
  • 2.0 (2)
  • 2.2 (2)
  • 2.235 (2)
  • 2.24 (1)
  • 2.25 (1)
  • 2.388 (2)
  • 2.39 (1)
  • 2.464 (2)
  • 2.5 (2)
  • 2.667 (2)
  • 2.743 (2)
  • 2.75 (2)
  • 2.794 (2)
  • 2.997 (2)
  • 3.0 (2)
  • 3.099 (2)
  • 3.17 (2)
  • 3.175 (2)
  • 3.2 (2)
  • 3.25 (2)
  • 3.251 (2)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (2)
  • 3.607 (2)
  • 3.96 (2)
  • 3.962 (2)
  • 3.974 (1)
  • 3.988 (2)
  • 4.0 (2)
  • 4.24 (1)
  • 4.242 (2)
  • 4.25 (1)
  • 4.3 (2)
  • 4.5 (2)
  • 4.521 (2)
  • 4.699 (2)
  • 4.775 (2)
  • 4.8 (2)
  • 4.801 (2)
  • 4.81 (2)
  • 4.88 (1)
  • 4.95 (2)
to
Cutting Width
  • 0.0394 (2)
  • 0.047 (2)
  • 0.0472 (2)
  • 0.0591 (2)
  • 0.062 (2)
  • 0.0689 (2)
  • 0.072 (2)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.079 (1)
  • 0.0866 (2)
  • 0.088 (2)
  • 0.0886 (1)
  • 0.094 (2)
  • 0.097 (2)
  • 0.0984 (2)
  • 0.105 (2)
  • 0.108 (2)
  • 0.1083 (2)
  • 0.11 (2)
  • 0.118 (2)
  • 0.1181 (2)
  • 0.122 (2)
  • 0.125 (2)
  • 0.126 (2)
  • 0.128 (2)
  • 0.131 (1)
  • 0.1378 (2)
  • 0.142 (2)
  • 0.156 (2)
  • 0.157 (2)
  • 0.1574 (2)
  • 0.1575 (2)
  • 0.167 (2)
  • 0.1673 (1)
  • 0.169 (2)
  • 0.1771 (2)
  • 0.1772 (2)
  • 0.178 (2)
  • 0.185 (2)
  • 0.188 (2)
  • 0.189 (2)
  • 0.192 (1)
  • 0.195 (2)
to
Maximum Cutting Depth
  • 5.33 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
to
Insert Size
  • 3 (2)
insertGeometry
Cutting Tool Material
  • B H (64)
  • B L (62)
  • C A (54)
  • C N (56)
  • D P (62)
  • H T (64)
  • H W (64)
backEnd
Connection Type
  • TAPER SHANK (64)
System Size
  • KM63TS (64)
Back-End Diameter
  • 2.48 (28)
  • 2.4803 (36)
to
Back-End Diameter
  • 63.0 (64)
to
other
Platform
  • KM63 (57)
Tool Unit
  • I (6)
  • M (64)
Over All Length [L]
  • 80.0 (4)
  • 90.0 (4)
  • 100.0 (4)
  • 125.0 (14)
  • 140.0 (28)
  • 170.0 (10)
to
Over All Length [L]
  • 3.1496 (4)
  • 3.5433 (4)
  • 3.937 (4)
  • 4.92 (6)
  • 4.921 (2)
  • 4.9213 (6)
  • 5.5118 (15)
  • 5.512 (13)
  • 6.6929 (4)
  • 6.693 (6)
to
Insert Hand
  • L (3)
  • N (62)
  • R (5)
obsoleteFacet
  • true (64)
  • false (57)
Category Path
Cutting Condition Material
  • H-All (61)
  • K-All (64)
  • K1 (26)
  • M-All (64)
  • N-All (64)
  • P-All (64)
  • S-All (64)
  • S4 (40)
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
KM63TS™ Schneidköpfe zur Innenbearbeitung

M-Clamping
(16 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products