successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (9)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (9)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (9)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (9)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (9)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (9)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (9)
  • M Stainless Steel (9)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (9)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (9)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (9)
  • K Cast Iron (9)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (9)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (9)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (9)
  • N Non-Ferrous Materials (9)
    • N1
      Wrought Aluminum
      (9)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (9)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (9)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (9)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (9)
  • S High-Temp Alloys (9)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (9)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (9)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (9)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (9)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
    • H2
      Hardened Materials 48-55 HRC
      (9)
    • H3
      Hardened Materials 56-60 HRC
      (9)
    • H4
      Hardened Materials >60 HRC
      (9)
Applications
  • Facing Facing (5)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • Profiling Profiling (5)
  • TRN Boring TRN Boring (9)
  • Turning Turning (9)
Cutting Condition
  • Heavily Interrupted Cut (9)
  • Interrupted (7)
  • Lightly Interrupted Cut (9)
  • Smooth Cut (9)
  • Varying Depth of Cut (9)
Tool Cutting Edge Angle
  • 48.0 (6)
  • 49.783 (1)
  • 50.0 (2)
to
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (7)
  • 3.0 (2)
  • 4.0 (7)
  • 6.0 (2)
  • 8.0 (3)
to
cornerConfiguration
Corner Radius
  • 0.1 (7)
  • 0.102 (5)
  • 0.2 (7)
  • 0.203 (5)
  • 0.34 (2)
  • 0.397 (9)
  • 0.4 (9)
  • 0.406 (4)
  • 0.6 (2)
  • 0.792 (3)
  • 0.794 (9)
  • 0.8 (9)
  • 1.19 (1)
  • 1.191 (9)
  • 1.2 (9)
  • 1.587 (1)
  • 1.588 (5)
  • 1.6 (7)
  • 2.381 (2)
to
Corner Radius
  • 0.004 (9)
  • 0.008 (7)
  • 0.0083 (1)
  • 0.013 (2)
  • 0.0156 (9)
  • 0.016 (9)
  • 0.031 (9)
  • 0.0312 (9)
  • 0.0313 (9)
  • 0.0315 (1)
  • 0.0469 (9)
  • 0.047 (7)
  • 0.0472 (1)
  • 0.0625 (7)
  • 0.063 (5)
  • 0.0938 (2)
  • 0.1563 (1)
  • 0.312 (2)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (7)
  • 241 (1)
  • CL4 (3)
  • CM2 (7)
  • CM3 (3)
  • CM4 (1)
  • CPX (5)
  • CW2 (3)
  • CW2015 (7)
  • CW5025 (9)
  • GX (1)
  • HK1500 (5)
  • HT2 (3)
  • HTX (1)
  • K060 (3)
  • K090 (7)
  • K1 (1)
  • K10M (9)
  • K10P (9)
  • K10U (7)
  • K15U (9)
  • K20K (9)
  • K21 (1)
  • K25M (9)
  • K25P (9)
  • K313 (9)
  • K35P (4)
  • K420 (5)
  • K45 (5)
  • K68 (7)
  • KB1340 (1)
  • KB1345 (3)
  • KB1610 (7)
  • KB1625 (5)
  • KB1630 (5)
  • KB5610 (7)
  • KB5625 (5)
  • KB5630 (5)
  • KB9610 (9)
  • KB9640 (3)
  • KBH10 (9)
  • KBH10B (7)
  • KBH20 (9)
  • KBH20B (7)
  • KBK35 (1)
  • KC210 (5)
  • KC250 (3)
  • KC5010 (9)
  • KC5025 (9)
  • KC5410 (9)
  • KC5510 (9)
  • KC5525 (7)
  • KC710 (1)
  • KC720 (7)
  • KC722 (1)
  • KC730 (7)
  • KC7310 (9)
  • KC732 (7)
  • KC8050 (9)
  • KC810 (9)
  • KC850 (9)
  • KC9010 (9)
  • KC9025 (9)
  • KC910 (9)
  • KC9105 (9)
  • KC9110 (9)
  • KC9120 (9)
  • KC9125 (9)
  • KC9140 (9)
  • KC9145 (7)
  • KC9210 (2)
  • KC9215 (9)
  • KC9225 (9)
  • KC9240 (9)
  • KC9240NEW (9)
  • KC9245 (9)
  • KC9315 (9)
  • KC9320 (9)
  • KC9325 (9)
  • KC935 (9)
  • KC950 (9)
  • KC990 (9)
  • KCD25 (2)
  • KCK05 (9)
  • KCK05B (9)
  • KCK15 (9)
  • KCK15B (9)
  • KCK20 (9)
  • KCK20B (9)
  • KCM15 (9)
  • KCM15B (9)
  • KCM25 (9)
  • KCM25B (9)
  • KCM35 (9)
  • KCM35B (5)
  • KCP05 (9)
  • KCP05B (9)
  • KCP10 (9)
  • KCP10B (9)
  • KCP25 (9)
  • KCP25B (9)
  • KCP30 (9)
  • KCP30B (7)
  • KCP40 (7)
  • KCP40B (7)
  • KCPK05 (9)
  • KCS10 (1)
  • KCS10B (9)
  • KCU10 (9)
  • KCU25 (9)
  • KD050 (5)
  • KD081 (5)
  • KD100 (5)
  • KD120 (5)
  • KD1400 (7)
  • KD1405 (5)
  • KD1425 (7)
  • KM1 (1)
  • KMF (1)
  • KT1120 (2)
  • KT125 (7)
  • KT150 (5)
  • KT175 (7)
  • KT315 (9)
  • KT325 (3)
  • KTP10 (2)
  • KU10T (9)
  • KU30T (9)
  • KY1310 (5)
  • KY1320 (9)
  • KY1540 (3)
  • KY1615 (7)
  • KY2000 (3)
  • KY2100 (3)
  • KY3000 (7)
  • KY3400 (5)
  • KY3500 (9)
  • KY4000 (3)
  • KY4300 (3)
  • KY4400 (9)
  • KYK10 (5)
  • KYK25 (5)
  • KYK35 (9)
  • KYS25 (3)
  • KYS30 (5)
  • NL200 (3)
  • NL250 (9)
  • NL300 (3)
  • NL400 (3)
  • NL920 (7)
  • P25 (1)
  • PB100 (1)
  • PB170 (1)
  • PB250 (1)
  • PB300 (1)
  • PS5 (3)
  • SP0819 (5)
  • SP3019 (3)
  • SP4019 (1)
  • SP4036 (2)
  • SP4093 (2)
  • THM (3)
  • THM-X (1)
  • THMF-X (1)
  • TN10P (9)
  • TN10U (9)
  • TN15M (9)
  • TN15U (9)
  • TN2000 (5)
  • TN20K (9)
  • TN20P (9)
  • TN30M (9)
  • TN30P (7)
  • TN4000 (5)
  • TN5015 (5)
  • TN5020 (5)
  • TN5105 (7)
  • TN5120 (7)
  • TN6010 (7)
  • TN6025 (5)
  • TN7005 (7)
  • TN7010 (7)
  • TN7015 (7)
  • TN7025 (7)
  • TN7035 (5)
  • TN7105 (5)
  • TN7110 (5)
  • TN7115 (7)
  • TN7125 (5)
  • TN7135 (5)
  • TN8025 (7)
  • TTI15 (3)
  • TTR (1)
  • TTS (3)
  • TTX (3)
  • WBH10C (7)
  • WBH10P (5)
  • WBH10U (5)
  • WBH25P (5)
  • WBH25U (5)
  • WBH30P (5)
  • WBK40U (1)
  • WBK45U (5)
  • WDN00U (3)
  • WDN25U (7)
  • WK05CT (9)
  • WK15CT (5)
  • WK20CT (9)
  • WM15CT (9)
  • WM25CT (9)
  • WM35CT (9)
  • WP05CT (3)
  • WP15CT (9)
  • WP25CT (9)
  • WP35CT (9)
  • WS10PT (9)
  • WS25PT (9)
  • WU10HT (9)
  • X00511 (1)
Wiper Insert
  • N (9)
Minimum Axial Groove Diameter
  • 3.937 (9)
to
Minimum Axial Groove Diameter
  • 100.0 (9)
to
Maximum Bore Depth
  • 115.0 (9)
to
Maximum Bore Depth
  • 4.528 (9)
to
frontEnd
Clamp Style
  • M (9)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (1)
  • D-DIAMOND/RHOMBIC 55 (4)
  • V-DIAMOND/RHOMBIC 35 (2)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (9)
  • B L (9)
  • C A (9)
  • C N (9)
  • D P (9)
  • H T (9)
  • H W (9)
backEnd
Back-End Diameter
  • 2.4803 (9)
to
Back-End Diameter
  • 63.0 (9)
to
other
Platform
  • KM63 (8)
Tool Unit
  • M (9)
Over All Length [L]
  • 115.0 (9)
to
Over All Length [L]
  • 4.528 (9)
to
Insert Hand
  • N (9)
Cutting Condition Material
  • H-All (9)
  • K-All (9)
  • K1 (1)
  • M-All (9)
  • N-All (9)
  • P-All (9)
  • S-All (9)
  • S4 (5)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM63TS™ Schneidköpfe

M-Klemmung • M-Klemmung, auf Mitte
(1 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3487474 KM63TSMCMNN12115 KM63TSMCMNN12115 115.0000 4.528 0.0000 .0000 100.0000 3.937 CN..120408/CN..432 2.01 4.42
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty
    KM63TS™ Schneidköpfe

    M-Clamping Centerline
    (4 Products)
    • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
    • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
    3487475 KM63TSMDMNL1504115 KM63TSMDMNL1504115 115.0000 4.528 0.0000 .0000 100.0000 3.937 DN..150408/DN..432 1.84 4.05
      3487476 KM63TSMDMNL1506115 KM63TSMDMNL1506115 115.0000 4.528 0.0000 .0000 100.0000 3.937 DN..150608/DN..442 1.83 4.04
        3487478 KM63TSMDMNR1504115 KM63TSMDMNR1504115 115.0000 4.528 0.0000 .0000 100.0000 3.937 DN..150408/DN..432 1.84 4.05
          3487479 KM63TSMDMNR1506115 KM63TSMDMNR1506115 115.0000 4.528 0.0000 .0000 100.0000 3.937 DN..150608/DN..442 1.83 4.04
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty
            KM63TS™ Schneidköpfe

            M-Clamping Centerline
            (2 Products)
            • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
            • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
            3487477 KM63TSMVMNL16115 KM63TSMVMNL16115 115.0000 4.528 0.0000 .0000 100.0000 3.937 VN..160408/VN..332 1.93 4.26
              3487480 KM63TSMVMNR16115 KM63TSMVMNR16115 115.0000 4.528 0.0000 .0000 100.0000 3.937 VN..160408/VN..332 1.93 4.26
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                KM63TS™ Schneidköpfe

                M-Klemmung, auf Mitte • P-Klemmung
                (2 Products)
                • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                3487603 KM63TSMWMNL08115 KM63TSMWMNL08115 115.0000 4.528 0.0000 .0000 100.0000 3.937 WN..080408/WN..432 1.98 4.37
                  3487604 KM63TSMWMNR08115 KM63TSMWMNR08115 115.0000 4.528 0.0000 .0000 100.0000 3.937 WN..080408/WN..432 1.98 4.37
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty
                    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                    You are about to create a duplicate . Do you want to proceed?
                    You are about to delete Do you want to proceed?
                    What would you like to rename your to?
                    Please enter a valid name
                    Please enter a name for the duplicate
                    Please enter a valid name
                    You are about to add to your My Solutions page. Do you want to proceed?
                    Please enter a valid name
                    Send a copy of

                    Please enter a valid Email
                    Please enter a valid name

                    We have found the following CAD Drawings

                    Select the files you are looking for and download them all at once

                    You should be logged to see your dashboard information
                    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                    item(s) successfully added to the cart
                    View Cart