successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
Applications
  • Back Boring Back Boring (12)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (12)
  • Blind Hole Finishing Blind Hole Finishing (12)
  • Chamfer Turning Chamfer Turning (12)
  • Cut-Off Cut-Off (12)
  • Deep Grooving Deep Grooving (12)
  • Face Grooving Face Grooving (12)
  • Facing Facing (12)
  • ID Grooving ID Grooving (12)
  • ID Thread Turning ID Thread Turning (12)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (12)
  • Profiling Profiling (12)
  • TRN Boring TRN Boring (12)
  • Threading Threading (12)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (12)
  • Through Hole Finishing Through Hole Finishing (12)
  • Turning Turning (12)
Type of Thread
  • 55 (8)
  • 60 (8)
  • ACME (8)
  • API (4)
  • API BUTTRESS (4)
  • API RD (4)
  • BSPT (4)
  • BSW (8)
  • M (8)
  • NPT (4)
  • NPTF (4)
  • RD DIN 405 (8)
  • STUB ACME (8)
  • TR DIN 103 (8)
  • UN (4)
  • UNJ (4)
Tool Cutting Edge Angle
  • 90.0 (12)
to
Cutting Edges Per Insert
  • 3.0 (8)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (1)
  • 0.038 (1)
  • 0.051 (4)
  • 0.056 (1)
  • 0.07 (2)
  • 0.076 (3)
  • 0.08 (1)
  • 0.081 (1)
  • 0.082 (1)
  • 0.085 (1)
  • 0.086 (1)
  • 0.091 (1)
  • 0.097 (1)
  • 0.1 (1)
  • 0.102 (1)
  • 0.108 (1)
  • 0.135 (1)
  • 0.152 (2)
  • 0.159 (1)
  • 0.16 (1)
  • 0.178 (1)
  • 0.2 (1)
  • 0.203 (2)
  • 0.21 (2)
  • 0.223 (1)
  • 0.24 (1)
  • 0.269 (1)
  • 0.279 (2)
  • 0.305 (2)
  • 0.31 (1)
  • 0.318 (1)
  • 0.381 (1)
  • 0.432 (4)
  • 0.533 (2)
  • 0.7 (1)
  • 0.76 (1)
  • 0.93 (1)
  • 0.936 (1)
  • 1.01 (1)
  • 1.404 (1)
  • 1.515 (1)
to
Corner Radius
  • 0.0012 (1)
  • 0.0015 (1)
  • 0.002 (4)
  • 0.0028 (3)
  • 0.003 (3)
  • 0.0031 (1)
  • 0.0032 (2)
  • 0.0033 (1)
  • 0.0034 (1)
  • 0.0038 (1)
  • 0.0039 (1)
  • 0.004 (1)
  • 0.0043 (1)
  • 0.0053 (1)
  • 0.006 (2)
  • 0.0063 (2)
  • 0.007 (1)
  • 0.008 (3)
  • 0.0083 (2)
  • 0.0088 (1)
  • 0.0094 (1)
  • 0.0106 (1)
  • 0.011 (2)
  • 0.012 (2)
  • 0.0122 (1)
  • 0.0125 (1)
  • 0.015 (1)
  • 0.017 (4)
  • 0.021 (2)
  • 0.022 (1)
  • 0.0276 (1)
  • 0.0298 (1)
  • 0.0368 (1)
  • 0.0369 (1)
  • 0.0398 (1)
  • 0.0553 (1)
  • 0.0597 (1)
to
application
Grade Of Cutting Tool
  • HCK20 (1)
  • K15 (3)
  • K68 (2)
  • KC5010 (4)
  • KC5025 (8)
  • KC710 (4)
  • KC720 (6)
  • KC722 (2)
  • KC730 (7)
  • KU25T (2)
  • P25 (3)
  • PN120 (1)
  • SP4066 (1)
  • TN6025 (8)
  • TTS (1)
Wiper Insert
  • N (8)
Minimum Axial Groove Diameter
  • 3.386 (7)
to
Minimum Axial Groove Diameter
  • 86.0 (7)
to
Maximum Bore Depth
  • 60.0 (7)
to
Maximum Bore Depth
  • 2.362 (7)
to
frontEnd
Clamp Style
  • M (8)
  • S (4)
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (12)
insertGeometry
Cutting Tool Material
  • H W (8)
backEnd
Back-End Diameter
  • 2.4803 (12)
to
Back-End Diameter
  • 63.0 (12)
to
other
Platform
  • KM63 (12)
Tool Unit
  • M (12)
Over All Length [L]
  • 60.0 (12)
to
Over All Length [L]
  • 2.362 (8)
  • 2.3622 (4)
to
Insert Hand
  • L (5)
  • R (4)
No filters matching ""
View Products in
Metric
Inch
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
2265417 KM63TSLSEL16N KM63TSLSEL16N 60.0000 2.362 43.0000 1.692 86.0000 3.386 LT16NL 1.34 2.96
    2265419 KM63TSLSEL22N KM63TSLSEL22N 60.0000 2.362 43.0000 1.692 86.0000 3.386 LT22NL 1.32 2.92
      3959386 KM63TSLSEL27N KM63TSLSEL27N 60.0000 2.362 43.0000 1.693 86.0000 3.386 LT27NL 1.36 2.99
        2265416 KM63TSLSER16N KM63TSLSER16N 60.0000 2.362 43.0000 1.692 86.0000 3.386 LT16NR 1.34 2.96
          2265418 KM63TSLSER22N KM63TSLSER22N 60.0000 2.362 43.0000 1.692 86.0000 3.386 LT22NR 1.32 2.92
            3959387 KM63TSLSER27N KM63TSLSER27N 60.0000 2.362 43.0000 1.693 86.0000 3.386 LT27NR 1.38 3.03
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM63TS™ Schneidköpfe

              LT Gewindedrehen
              (6 Products)
              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
              2265421 KM63TSLSSL16 KM63TSLSSL16 60.0000 2.362 43.0000 1.692     LT16EL 1.21 2.66
                2265423 KM63TSLSSL22 KM63TSLSSL22 60.0000 2.362 43.0000 1.692     LT22EL 1.20 2.64
                  3959388 KM63TSLSSL27 KM63TSLSSL27 60.0000 2.362 43.0000 1.693 86.0000 3.386 LT27EL 1.19 2.62
                    2265420 KM63TSLSSR16 KM63TSLSSR16 60.0000 2.362 43.0000 1.692     LT16ER 1.21 2.68
                      2265422 KM63TSLSSR22 KM63TSLSSR22 60.0000 2.362 43.0000 1.692     LT22ER 1.20 2.64
                        3959389 KM63TSLSSR27 KM63TSLSSR27 60.0000 2.362 43.0000 1.693     LT27ER 1.19 2.61
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart