successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

KM63TS™ • HPC • Hochdruckkühlmittel-Schneidköpfe

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
  • Facing Facing (10)
  • Multiple Direction Cutting Multiple Direction Cutting (10)
  • Plunge Turning Plunge Turning (2)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (8)
  • Turning Turning (10)
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Interrupted (10)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (6)
to
Connection Style
  • KM (2)
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (8)
  • 3.0 (2)
  • 4.0 (8)
  • 6.0 (2)
  • 8.0 (4)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (4)
  • 0.102 (6)
  • 0.2 (4)
  • 0.203 (2)
  • 0.34 (4)
  • 0.397 (8)
  • 0.4 (10)
  • 0.406 (4)
  • 0.6 (2)
  • 0.792 (6)
  • 0.794 (8)
  • 0.8 (10)
  • 1.188 (2)
  • 1.19 (2)
  • 1.191 (10)
  • 1.2 (10)
  • 1.587 (2)
  • 1.588 (6)
  • 1.6 (10)
  • 2.38 (2)
  • 2.4 (2)
  • 3.2 (2)
to
Corner Radius
  • 0.004 (8)
  • 0.008 (4)
  • 0.0083 (2)
  • 0.013 (4)
  • 0.0156 (10)
  • 0.016 (8)
  • 0.031 (8)
  • 0.0312 (8)
  • 0.0313 (10)
  • 0.0315 (2)
  • 0.0468 (2)
  • 0.0469 (10)
  • 0.047 (10)
  • 0.0472 (2)
  • 0.0625 (10)
  • 0.063 (10)
  • 0.0938 (2)
  • 0.094 (2)
  • 0.126 (2)
  • 0.1563 (2)
  • 0.312 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (8)
  • 241 (2)
  • CL4 (6)
  • CM2 (8)
  • CM3 (6)
  • CM4 (4)
  • CPX (8)
  • CW2 (6)
  • CW2015 (8)
  • CW5025 (10)
  • GX (2)
  • HK1500 (8)
  • HT2 (6)
  • HTX (2)
  • K060 (2)
  • K090 (8)
  • K1 (2)
  • K10M (10)
  • K10P (10)
  • K10U (4)
  • K15U (8)
  • K20K (10)
  • K21 (2)
  • K25M (8)
  • K25P (8)
  • K313 (10)
  • K35P (4)
  • K420 (4)
  • K45 (2)
  • K68 (8)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (4)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (4)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (6)
  • KBH20 (8)
  • KBH20B (6)
  • KBK35 (2)
  • KC210 (6)
  • KC250 (4)
  • KC5010 (10)
  • KC5025 (10)
  • KC5410 (10)
  • KC5510 (10)
  • KC5525 (8)
  • KC710 (2)
  • KC720 (6)
  • KC722 (2)
  • KC730 (6)
  • KC7310 (10)
  • KC732 (6)
  • KC8050 (10)
  • KC810 (10)
  • KC850 (10)
  • KC9010 (10)
  • KC9025 (10)
  • KC910 (10)
  • KC9105 (10)
  • KC9110 (10)
  • KC9120 (10)
  • KC9125 (10)
  • KC9140 (10)
  • KC9145 (10)
  • KC9210 (4)
  • KC9215 (10)
  • KC9225 (10)
  • KC9240 (10)
  • KC9240NEW (10)
  • KC9245 (10)
  • KC9315 (10)
  • KC9320 (10)
  • KC9325 (10)
  • KC935 (10)
  • KC950 (10)
  • KC990 (10)
  • KCK05 (10)
  • KCK05B (10)
  • KCK15 (10)
  • KCK15B (10)
  • KCK20 (10)
  • KCK20B (10)
  • KCM15 (10)
  • KCM15B (10)
  • KCM25 (10)
  • KCM25B (10)
  • KCM35 (10)
  • KCM35B (10)
  • KCP05 (10)
  • KCP05B (8)
  • KCP10 (10)
  • KCP10B (10)
  • KCP25 (10)
  • KCP25B (10)
  • KCP30 (10)
  • KCP30B (10)
  • KCP40 (10)
  • KCP40B (10)
  • KCPK05 (10)
  • KCS10 (2)
  • KCS10B (10)
  • KCU10 (10)
  • KCU25 (10)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (4)
  • KD1405 (2)
  • KD1425 (4)
  • KM1 (2)
  • KMF (2)
  • KT1120 (2)
  • KT125 (6)
  • KT150 (2)
  • KT175 (6)
  • KT315 (8)
  • KT325 (6)
  • KU10T (8)
  • KU30T (10)
  • KY1310 (6)
  • KY1320 (10)
  • KY1540 (2)
  • KY1615 (8)
  • KY2000 (4)
  • KY2100 (2)
  • KY3000 (8)
  • KY3400 (6)
  • KY3500 (10)
  • KY4000 (4)
  • KY4300 (4)
  • KY4400 (10)
  • KYHK15B (10)
  • KYK10 (4)
  • KYK25 (6)
  • KYK35 (10)
  • KYS25 (2)
  • KYS30 (4)
  • NL200 (6)
  • NL250 (10)
  • NL300 (8)
  • NL400 (6)
  • NL920 (8)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (6)
  • SP0819 (10)
  • SP3019 (6)
  • SP4019 (4)
  • THM (2)
  • THM-X (6)
  • THMF-X (2)
  • TN10P (10)
  • TN10U (8)
  • TN15M (10)
  • TN15U (8)
  • TN2000 (8)
  • TN20K (10)
  • TN20P (10)
  • TN30M (10)
  • TN30P (10)
  • TN4000 (8)
  • TN5015 (10)
  • TN5020 (10)
  • TN5105 (8)
  • TN5120 (10)
  • TN6010 (6)
  • TN6025 (8)
  • TN7005 (8)
  • TN7010 (10)
  • TN7015 (10)
  • TN7025 (10)
  • TN7035 (10)
  • TN7105 (8)
  • TN7110 (10)
  • TN7115 (10)
  • TN7125 (10)
  • TN7135 (10)
  • TN8025 (10)
  • TTI15 (6)
  • TTR (2)
  • TTS (6)
  • TTX (6)
  • WBH10C (6)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH25U (6)
  • WBH30P (2)
  • WBK40U (2)
  • WBK45U (6)
  • WDN00U (2)
  • WDN25U (4)
  • WK05CT (10)
  • WK15CT (8)
  • WK20CT (10)
  • WM15CT (10)
  • WM25CT (10)
  • WM35CT (10)
  • WP05CT (4)
  • WP15CT (10)
  • WP25CT (10)
  • WP35CT (10)
  • WS10PT (10)
  • WS25PT (10)
  • WU10HT (10)
  • X00511 (2)
Hand Of Tool
  • L (1)
  • R (1)
Wiper Insert
  • N (10)
  • Y (8)
Minimum Axial Groove Diameter
  • 3.15 (8)
to
Minimum Axial Groove Diameter
  • 80.0 (8)
to
Cutting Direction
  • S (2)
Rake Angle Style
  • DOUBLE NEGATIVE (2)
Maximum Bore Depth
  • 60.0 (8)
to
Maximum Bore Depth
  • 2.362 (8)
to
frontEnd
Clamp Style
  • P (10)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (4)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C A (10)
  • C N (10)
  • D P (8)
  • H T (8)
  • H W (10)
backEnd
Connection Type
  • TAPER SHANK (2)
System Size
  • KM63TS (2)
Back-End Diameter
  • 2.48 (10)
to
Back-End Diameter
  • 63.0 (10)
to
other
Platform
  • KM63 (10)
Tool Unit
  • M (10)
Over All Length [L]
  • 60.0 (10)
to
Over All Length [L]
  • 2.362 (10)
to
Insert Hand
  • N (10)
obsoleteFacet
  • false (10)
  • true (10)
Cutting Condition Material
  • H-All (10)
  • K-All (10)
  • K1 (2)
  • M-All (10)
  • N-All (10)
  • P-All (10)
  • S-All (10)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
KM63TS™ Cutting Units HPC

P-Clamping
(4 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Multi Coolant TurningMulti Coolant Turning
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5697236 KM63TSPCLNL12HPC KM63TSPCLNL12HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.33 2.93
    5697238 KM63TSPCLNL16HPC KM63TSPCLNL16HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.31 2.88
      5697235 KM63TSPCLNR12HPC KM63TSPCLNR12HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.33 2.93
        5697237 KM63TSPCLNR16HPC KM63TSPCLNR16HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.31 2.88
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM63TS™ Schneidköpfe HPC

          P-Klemmung
          (2 Products)
          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
          • Multi Coolant TurningMulti Coolant Turning
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          5697260 KM63TSPDJNL15HPC KM63TSPDJNL15HPC 60.0000 2.362 43.0000 1.693 DN..150608/DN..442 1.01 2.22
            5697239 KM63TSPDJNR15HPC KM63TSPDJNR15HPC 60.0000 2.362 43.0000 1.693 DN..150608/DN..442 1.01 2.22
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM63TS™ Schneidköpfe HPC

              P-Klemmung
              (2 Products)
              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              • Multi Coolant TurningMulti Coolant Turning
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
              5697262 KM63TSPDUNL15HPC KM63TSPDUNL15HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 DN..150608/DN..442 1.28 2.83
                5697261 KM63TSPDUNR15HPC KM63TSPDUNR15HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 DN..150608/DN..442 1.28 2.83
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  KM63TS™ Schneidköpfe HPC

                  P-Klemmung
                  (2 Products)
                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Multi Coolant TurningMulti Coolant Turning
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  5697264 KM63TSPWLNL08HPC KM63TSPWLNL08HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 WN..080408/WN..432 1.34 2.96
                    5697263 KM63TSPWLNR08HPC KM63TSPWLNR08HPC 60.0000 2.362 43.0000 1.693 80.0000 3.150 WN..080408/WN..432 1.34 2.96
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart