Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

TopThread™ und TopGroove™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (18)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (18)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (18)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (18)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (18)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (18)
  • M Stainless Steel (18)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (18)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (18)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (18)
  • K Cast Iron (18)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (18)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (18)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (18)
  • N Non-Ferrous Materials (18)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (18)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (18)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (18)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (18)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (18)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (18)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (18)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (12)
    • H4
      Hardened Materials >60 HRC
      (12)
Applications
  • Back Boring Back Boring (18)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (18)
  • Blind Hole Finishing Blind Hole Finishing (18)
  • Chamfer Turning Chamfer Turning (18)
  • Cut-Off Cut-Off (18)
  • Deep Grooving Deep Grooving (18)
  • Face Grooving Face Grooving (18)
  • Facing Facing (18)
  • Grooving Grooving (18)
  • ID Grooving ID Grooving (18)
  • ID Thread Turning ID Thread Turning (18)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • OD Thread Turning OD Thread Turning (18)
  • Plunge Turning Plunge Turning (18)
  • Profiling Profiling (18)
  • TRN Boring TRN Boring (18)
  • Threading Threading (18)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (18)
  • Through Hole Finishing Through Hole Finishing (18)
  • Turning Turning (18)
Type of Thread
  • 60 (18)
  • ACME (12)
  • API (12)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (18)
  • M (11)
  • NPT (8)
  • STUB ACME (8)
  • UN (18)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (18)
  • Lightly Interrupted Cut (18)
  • Smooth Cut (18)
  • Varying Depth of Cut (18)
Tool Cutting Edge Angle
  • 90.0 (18)
to
Cutting Edges Per Insert
  • 1.0 (18)
  • 2.0 (18)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (4)
  • 0.051 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.076 (18)
  • 0.08 (14)
  • 0.089 (10)
  • 0.09 (10)
  • 0.094 (8)
  • 0.097 (4)
  • 0.1 (14)
  • 0.102 (14)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.155 (6)
  • 0.157 (8)
  • 0.16 (4)
  • 0.165 (12)
  • 0.173 (8)
  • 0.178 (8)
  • 0.18 (3)
  • 0.185 (3)
  • 0.19 (18)
  • 0.191 (18)
  • 0.198 (8)
  • 0.2 (8)
  • 0.202 (11)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (12)
  • 0.255 (4)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.315 (10)
  • 0.318 (12)
  • 0.33 (8)
  • 0.34 (8)
  • 0.343 (11)
  • 0.356 (8)
  • 0.404 (8)
  • 0.406 (8)
  • 0.43 (8)
  • 0.445 (12)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (6)
  • 0.508 (8)
  • 0.565 (2)
  • 0.57 (4)
  • 0.572 (12)
  • 0.575 (8)
  • 0.75 (6)
  • 0.787 (14)
  • 0.902 (12)
  • 1.0 (14)
  • 1.194 (14)
  • 1.195 (4)
  • 1.25 (14)
  • 1.5 (14)
  • 1.585 (8)
  • 1.588 (18)
  • 1.59 (2)
  • 1.75 (14)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (12)
  • 2.25 (12)
  • 2.388 (12)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (4)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.003 (18)
  • 0.0031 (14)
  • 0.0035 (10)
  • 0.0037 (8)
  • 0.0038 (4)
  • 0.004 (14)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (6)
  • 0.0062 (8)
  • 0.0065 (12)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (18)
  • 0.0078 (8)
  • 0.0079 (2)
  • 0.008 (11)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (12)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.0124 (8)
  • 0.0125 (12)
  • 0.013 (8)
  • 0.0135 (15)
  • 0.014 (8)
  • 0.0159 (8)
  • 0.016 (8)
  • 0.017 (8)
  • 0.0175 (12)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (6)
  • 0.02 (8)
  • 0.0225 (12)
  • 0.0295 (6)
  • 0.031 (14)
  • 0.0355 (12)
  • 0.0394 (14)
  • 0.047 (14)
  • 0.0492 (14)
  • 0.0591 (14)
  • 0.0625 (18)
  • 0.0689 (14)
  • 0.078 (8)
  • 0.0787 (12)
  • 0.0886 (12)
  • 0.094 (12)
  • 0.0984 (4)
  • 0.106 (4)
  • 0.125 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (14)
  • K313 (18)
  • K420 (18)
  • K4H (11)
  • K68 (18)
  • KB1345 (12)
  • KB1630 (12)
  • KB5625 (8)
  • KC250 (14)
  • KC5010 (18)
  • KC5025 (18)
  • KC5410 (18)
  • KC710 (18)
  • KC720 (18)
  • KC722 (18)
  • KC730 (18)
  • KC732 (8)
  • KC810 (18)
  • KC850 (18)
  • KC910 (11)
  • KC9110 (18)
  • KC9120 (8)
  • KC9320 (18)
  • KC935 (18)
  • KC950 (18)
  • KCK20 (15)
  • KCK20B (18)
  • KCP10B (18)
  • KCP25B (18)
  • KCU10 (18)
  • KCU25 (18)
  • KD050 (4)
  • KD081 (8)
  • KD100 (10)
  • KD120 (12)
  • KD1425 (6)
  • KT175 (14)
  • KT315 (18)
  • KU10T (18)
  • KU25T (18)
  • KU30T (18)
  • KY3000 (12)
  • THM (14)
  • TN10P (13)
  • TN6010 (18)
  • TN6025 (18)
  • TN7110 (18)
  • WU10HT (4)
  • WU10PT (7)
  • WU25PT (4)
Wiper Insert
  • N (18)
Minimum Axial Groove Diameter
  • 0.7283 (2)
  • 0.7874 (2)
  • 0.9843 (2)
  • 1.3386 (2)
  • 1.5748 (4)
  • 1.9685 (5)
  • 1.969 (1)
to
Minimum Axial Groove Diameter
  • 18.5 (2)
  • 20.0 (2)
  • 25.0 (2)
  • 34.0 (2)
  • 40.0 (4)
  • 50.0 (6)
to
Maximum Axial Groove Diameter
  • 9999.0 (18)
to
Maximum Axial Groove Diameter
  • 393.661 (18)
to
Maximum Bore Depth
  • 42.01 (2)
  • 56.16 (2)
  • 70.32 (2)
  • 70.47 (2)
  • 88.11 (2)
  • 91.26 (2)
  • 96.26 (2)
  • 120.34 (4)
to
Maximum Bore Depth
  • 1.6539 (2)
  • 2.211 (2)
  • 2.7685 (2)
  • 2.7744 (2)
  • 3.4689 (2)
  • 3.5929 (1)
  • 3.593 (1)
  • 3.7898 (2)
  • 4.7378 (4)
to
frontEnd
Clamp Style
  • N (17)
Insert Shape
  • TN-TOP NOTCH (18)
Cutting Width
  • 0.5 (6)
  • 0.787 (6)
  • 0.8 (6)
  • 0.889 (6)
  • 0.991 (6)
  • 1.0 (14)
  • 1.041 (6)
  • 1.19 (10)
  • 1.194 (14)
  • 1.199 (3)
  • 1.2 (14)
  • 1.39 (6)
  • 1.397 (6)
  • 1.4 (6)
  • 1.473 (6)
  • 1.5 (14)
  • 1.56 (3)
  • 1.57 (11)
  • 1.575 (14)
  • 1.69 (6)
  • 1.7 (6)
  • 1.702 (6)
  • 1.75 (14)
  • 1.829 (8)
  • 1.94 (6)
  • 1.95 (6)
  • 1.956 (6)
  • 1.981 (8)
  • 2.0 (14)
  • 2.007 (6)
  • 2.2 (14)
  • 2.235 (14)
  • 2.24 (10)
  • 2.25 (10)
  • 2.388 (14)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (14)
  • 2.667 (8)
  • 2.74 (6)
  • 2.743 (14)
  • 2.75 (14)
  • 2.794 (8)
  • 2.997 (14)
  • 3.0 (18)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (18)
  • 3.18 (5)
  • 3.2 (18)
  • 3.245 (6)
  • 3.25 (8)
  • 3.251 (14)
  • 3.27 (6)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (18)
  • 3.607 (8)
  • 3.73 (3)
  • 3.81 (6)
  • 3.84 (6)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (12)
  • 4.24 (4)
  • 4.242 (12)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (12)
  • 4.521 (8)
  • 4.699 (10)
  • 4.775 (12)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (8)
  • 4.801 (12)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (6)
  • 0.031 (6)
  • 0.0315 (6)
  • 0.035 (6)
  • 0.039 (6)
  • 0.0394 (14)
  • 0.041 (6)
  • 0.047 (14)
  • 0.0472 (14)
  • 0.055 (6)
  • 0.0551 (6)
  • 0.058 (6)
  • 0.0591 (14)
  • 0.062 (14)
  • 0.0669 (6)
  • 0.067 (6)
  • 0.0689 (14)
  • 0.072 (8)
  • 0.076 (6)
  • 0.0768 (6)
  • 0.077 (6)
  • 0.078 (8)
  • 0.0787 (14)
  • 0.079 (8)
  • 0.0866 (14)
  • 0.088 (14)
  • 0.0886 (10)
  • 0.094 (14)
  • 0.097 (8)
  • 0.0984 (14)
  • 0.105 (8)
  • 0.108 (14)
  • 0.1083 (14)
  • 0.11 (8)
  • 0.118 (14)
  • 0.1181 (18)
  • 0.122 (8)
  • 0.125 (18)
  • 0.126 (18)
  • 0.1278 (6)
  • 0.128 (14)
  • 0.129 (6)
  • 0.131 (4)
  • 0.1378 (18)
  • 0.142 (8)
  • 0.147 (3)
  • 0.15 (6)
  • 0.151 (6)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (12)
  • 0.1575 (12)
  • 0.167 (12)
  • 0.1673 (4)
  • 0.169 (8)
  • 0.1771 (12)
  • 0.1772 (12)
  • 0.178 (8)
  • 0.185 (10)
  • 0.188 (12)
  • 0.189 (12)
  • 0.192 (4)
  • 0.195 (8)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 5.33 (5)
to
Maximum Cutting Depth
  • 0.21 (5)
to
Insert Size
  • 2 (6)
  • 3 (8)
  • 4 (4)
insertGeometry
Cutting Tool Material
  • B H (12)
  • B L (8)
  • C N (12)
  • D P (10)
  • H T (18)
  • H W (18)
backEnd
Back-End Diameter
  • 1.9685 (18)
to
Back-End Diameter
  • 50.0 (18)
to
other
Platform
  • KM50 (16)
Tool Unit
  • I (18)
  • M (18)
Over All Length [L]
  • 70.0 (2)
  • 80.0 (2)
  • 90.0 (2)
  • 100.0 (2)
  • 110.0 (4)
  • 125.0 (2)
  • 140.0 (4)
to
Over All Length [L]
  • 2.7559 (2)
  • 3.1496 (2)
  • 3.5433 (2)
  • 3.937 (2)
  • 4.3307 (3)
  • 4.331 (1)
  • 4.9213 (2)
  • 5.5118 (4)
to
Insert Hand
  • L (9)
  • R (9)
Cutting Condition Material
  • H-All (18)
  • K-All (18)
  • M-All (18)
  • N-All (18)
  • P-All (18)
  • S-All (18)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM50TS™ Schneidköpfe zur Innenbearbeitung

(18 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3790584 KM50TSS12ENEL2 KM50TSS12ENEL2 18.5000 .7283 11.0000 .4331 42.0100 1.653 70.0000 2.755 NG2R 0.44 0.97
    3790585 KM50TSS12ENER2 KM50TSS12ENER2 18.5000 .7283 11.0000 .4331 42.0100 1.653 70.0000 2.755 NG2L 0.44 0.97
      3790291 KM50TSS16FNEL2 KM50TSS16FNEL2 20.0000 .7874 11.0000 .4331 56.1600 2.211 80.0000 3.149 NG2R 0.44 0.97
        3790583 KM50TSS16FNER2 KM50TSS16FNER2 20.0000 .7874 11.0000 .4331 56.1600 2.211 80.0000 3.149 NG2L 0.44 0.97
          3790586 KM50TSS20HNEL2 KM50TSS20HNEL2 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 NG2R 0.58 1.28
            3790587 KM50TSS20HNER2 KM50TSS20HNER2 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 NG2L 0.58 1.28
              3790588 KM50TSS25JNEL3 KM50TSS25JNEL3 34.0000 1.338 17.0000 .6693 88.1100 3.468 110.0000 4.330 NG3R 0.67 1.48
                3790589 KM50TSS25JNER3 KM50TSS25JNER3 34.0000 1.338 17.0000 .6693 88.1100 3.468 110.0000 4.330 NG3L 0.67 1.48
                  3790590 KM50TSS32GNEL3 KM50TSS32GNEL3 40.0000 1.574 22.0000 .8661 70.4700 2.774 90.0000 3.543 NG3R 0.71 1.57
                    3790591 KM50TSS32GNER3 KM50TSS32GNER3 40.0000 1.574 22.0000 .8661 70.4700 2.774 90.0000 3.543 NG3L 0.71 1.57
                      3790592 KM50TSS32KNEL3 KM50TSS32KNEL3 40.0000 1.574 22.0000 .8661 96.2600 3.789 125.0000 4.921 NG3R 0.97 2.14
                        3790593 KM50TSS32KNER3 KM50TSS32KNER3 40.0000 1.574 22.0000 .8661 96.2600 3.789 125.0000 4.921 NG3L 0.97 2.14
                          3790594 KM50TSS40JNEL4 KM50TSS40JNEL4 50.0000 1.968 27.0000 1.063 91.2600 3.592 110.0000 4.330 NG4R 1.09 2.41
                            3790595 KM50TSS40JNER4 KM50TSS40JNER4 50.0000 1.969 27.0000 1.063 91.2600 3.593 110.0000 4.331   1.09 2.41
                              3790596 KM50TSS40LNEL3 KM50TSS40LNEL3 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG3R 1.40 3.09
                                3790597 KM50TSS40LNEL4 KM50TSS40LNEL4 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG4R 1.39 3.06
                                  3790598 KM50TSS40LNER3 KM50TSS40LNER3 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG3L 1.40 3.09
                                    3790599 KM50TSS40LNER4 KM50TSS40LNER4 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG4L 1.39 3.06
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor

                                      SUPPORT

                                      Hilfe zu Produkten
                                      E-Mail-Adresse | 0800 1015774

                                       

                                      Hilfe bei Bestellungen

                                      E-Mail-Adresse | 800.979.4342


                                      Chat mit einem Experten  Available 8am-6pm EST

                                      WIDIA WERBEARTIKEL

                                      Karriere

                                      Durchsuchen Sie unsere Stellenangebote

                                      SOZIALE MEDIEN

                                      BLEIBEN WIR IM KONTAKT

                                      Bleiben wir im Kontakt

                                      © 2019 WIDIA Product Group 2018, Privacy Policy

                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      Can’t find the file type you’re looking for?
                                      Request Drawings »

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart