Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
  • Back Boring Back Boring (8)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (8)
  • Blind Hole Finishing Blind Hole Finishing (8)
  • Chamfer Turning Chamfer Turning (8)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (10)
  • Grooving Grooving (8)
  • ID Facing ID Facing (4)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • OD Thread Turning OD Thread Turning (8)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (10)
  • Threading Threading (8)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (8)
  • Through Hole Finishing Through Hole Finishing (8)
  • Turning Turning (10)
Type of Thread
  • 60 (10)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (10)
  • M (6)
  • NPT (6)
  • STUB ACME (6)
  • UN (10)
  • UNJ (6)
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (10)
  • 2.0 (10)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (3)
  • 0.051 (3)
  • 0.057 (3)
  • 0.066 (6)
  • 0.076 (10)
  • 0.08 (6)
  • 0.089 (3)
  • 0.09 (3)
  • 0.094 (6)
  • 0.097 (3)
  • 0.1 (6)
  • 0.102 (6)
  • 0.116 (3)
  • 0.117 (3)
  • 0.127 (6)
  • 0.131 (6)
  • 0.132 (6)
  • 0.133 (6)
  • 0.15 (6)
  • 0.155 (6)
  • 0.157 (6)
  • 0.16 (4)
  • 0.165 (10)
  • 0.173 (6)
  • 0.178 (6)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (6)
  • 0.2 (6)
  • 0.202 (6)
  • 0.224 (6)
  • 0.235 (6)
  • 0.244 (3)
  • 0.25 (6)
  • 0.251 (6)
  • 0.254 (10)
  • 0.255 (3)
  • 0.269 (6)
  • 0.282 (6)
  • 0.284 (6)
  • 0.3 (6)
  • 0.315 (8)
  • 0.318 (10)
  • 0.33 (6)
  • 0.34 (6)
  • 0.343 (7)
  • 0.356 (6)
  • 0.404 (6)
  • 0.406 (6)
  • 0.43 (6)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (6)
  • 0.508 (6)
  • 0.565 (2)
  • 0.57 (3)
  • 0.572 (10)
  • 0.575 (7)
  • 0.787 (6)
  • 0.902 (10)
  • 1.0 (6)
  • 1.194 (6)
  • 1.195 (3)
  • 1.25 (6)
  • 1.5 (6)
  • 1.585 (6)
  • 1.588 (10)
  • 1.59 (2)
  • 1.75 (6)
  • 1.98 (3)
  • 1.981 (6)
  • 2.0 (10)
  • 2.25 (10)
  • 2.388 (10)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (3)
  • 0.0023 (3)
  • 0.0026 (6)
  • 0.003 (10)
  • 0.0031 (6)
  • 0.0035 (3)
  • 0.0037 (6)
  • 0.0038 (3)
  • 0.004 (6)
  • 0.0046 (6)
  • 0.005 (6)
  • 0.0052 (6)
  • 0.0053 (6)
  • 0.0059 (6)
  • 0.006 (6)
  • 0.0062 (6)
  • 0.0065 (10)
  • 0.0068 (6)
  • 0.007 (6)
  • 0.0075 (10)
  • 0.0078 (6)
  • 0.0079 (3)
  • 0.008 (6)
  • 0.0088 (6)
  • 0.0093 (6)
  • 0.0096 (3)
  • 0.0099 (6)
  • 0.01 (10)
  • 0.0106 (6)
  • 0.0111 (6)
  • 0.0112 (6)
  • 0.0118 (6)
  • 0.0124 (6)
  • 0.0125 (10)
  • 0.013 (6)
  • 0.0135 (10)
  • 0.014 (6)
  • 0.0159 (6)
  • 0.016 (6)
  • 0.017 (6)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (6)
  • 0.02 (6)
  • 0.0225 (10)
  • 0.031 (6)
  • 0.0355 (10)
  • 0.0394 (6)
  • 0.047 (6)
  • 0.0492 (6)
  • 0.0591 (6)
  • 0.0625 (10)
  • 0.0689 (6)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.094 (10)
  • 0.0984 (4)
  • 0.106 (3)
  • 0.125 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (6)
  • K313 (10)
  • K420 (10)
  • K4H (6)
  • K68 (10)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KC250 (6)
  • KC5010 (10)
  • KC5025 (10)
  • KC5410 (10)
  • KC710 (10)
  • KC720 (10)
  • KC722 (10)
  • KC730 (10)
  • KC732 (6)
  • KC810 (10)
  • KC850 (10)
  • KC910 (6)
  • KC9110 (10)
  • KC9120 (6)
  • KC9320 (10)
  • KC935 (10)
  • KC950 (10)
  • KCK20 (10)
  • KCK20B (10)
  • KCP10B (10)
  • KCP25B (10)
  • KCU10 (10)
  • KCU25 (10)
  • KD050 (3)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (6)
  • KT315 (10)
  • KU10T (10)
  • KU25T (10)
  • KU30T (10)
  • KY3000 (10)
  • THM (6)
  • TN10P (8)
  • TN6010 (10)
  • TN6025 (10)
  • TN7110 (10)
  • WU10HT (3)
  • WU10PT (4)
  • WU25PT (3)
Wiper Insert
  • N (10)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 2.756 (6)
  • 3.5 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 70.0 (6)
  • 88.9 (2)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Maximum Bore Depth
  • 50.0 (6)
to
Maximum Bore Depth
  • 1.969 (6)
to
frontEnd
Clamp Style
  • N (10)
Insert Shape
  • TN-TOP NOTCH (10)
Cutting Width
  • 1.0 (6)
  • 1.19 (3)
  • 1.194 (6)
  • 1.2 (6)
  • 1.5 (6)
  • 1.57 (6)
  • 1.575 (6)
  • 1.75 (6)
  • 1.829 (6)
  • 1.981 (6)
  • 2.0 (6)
  • 2.2 (6)
  • 2.235 (6)
  • 2.24 (3)
  • 2.25 (3)
  • 2.388 (6)
  • 2.39 (3)
  • 2.464 (6)
  • 2.5 (6)
  • 2.667 (6)
  • 2.743 (6)
  • 2.75 (6)
  • 2.794 (6)
  • 2.997 (6)
  • 3.0 (10)
  • 3.099 (6)
  • 3.17 (6)
  • 3.175 (10)
  • 3.18 (2)
  • 3.2 (10)
  • 3.25 (6)
  • 3.251 (6)
  • 3.32 (3)
  • 3.329 (3)
  • 3.5 (10)
  • 3.607 (6)
  • 3.96 (6)
  • 3.962 (6)
  • 3.974 (3)
  • 3.988 (6)
  • 4.0 (10)
  • 4.24 (3)
  • 4.242 (10)
  • 4.25 (3)
  • 4.3 (6)
  • 4.5 (10)
  • 4.521 (6)
  • 4.699 (8)
  • 4.775 (10)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (6)
  • 4.801 (10)
  • 4.81 (6)
  • 4.88 (3)
  • 4.95 (6)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0394 (6)
  • 0.047 (6)
  • 0.0472 (6)
  • 0.0591 (6)
  • 0.062 (6)
  • 0.0689 (6)
  • 0.072 (6)
  • 0.078 (6)
  • 0.0787 (6)
  • 0.079 (3)
  • 0.0866 (6)
  • 0.088 (6)
  • 0.0886 (3)
  • 0.094 (6)
  • 0.097 (6)
  • 0.0984 (6)
  • 0.105 (6)
  • 0.108 (6)
  • 0.1083 (6)
  • 0.11 (6)
  • 0.118 (6)
  • 0.1181 (10)
  • 0.122 (6)
  • 0.125 (10)
  • 0.126 (10)
  • 0.128 (6)
  • 0.131 (3)
  • 0.1378 (10)
  • 0.142 (6)
  • 0.156 (6)
  • 0.157 (6)
  • 0.1574 (10)
  • 0.1575 (10)
  • 0.167 (10)
  • 0.1673 (3)
  • 0.169 (6)
  • 0.1771 (10)
  • 0.1772 (10)
  • 0.178 (6)
  • 0.185 (8)
  • 0.188 (10)
  • 0.189 (10)
  • 0.192 (3)
  • 0.195 (6)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 5.33 (2)
  • 7.47 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
  • 0.294 (2)
to
Insert Size
  • 3 (6)
  • 4 (4)
insertGeometry
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (10)
  • H W (10)
backEnd
Back-End Diameter
  • 1.9685 (10)
to
Back-End Diameter
  • 50.0 (10)
to
other
Platform
  • KM50 (10)
Tool Unit
  • I (10)
  • M (10)
Over All Length [L]
  • 50.0 (8)
  • 60.0 (2)
to
Over All Length [L]
  • 1.9685 (2)
  • 1.969 (6)
  • 2.362 (2)
to
Insert Hand
  • L (5)
  • R (5)
Cutting Condition Material
  • H-All (10)
  • K-All (10)
  • M-All (10)
  • N-All (10)
  • P-All (10)
  • S-All (10)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM50TS™ Schneidköpfe

(4 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3753572 KM50TSNEL3 KM50TSNEL3 50.0000 1.969 35.0000 1.378 70.0000 2.756 NG3R 0.60 1.32
    3753583 KM50TSNEL4 KM50TSNEL4 50.0000 1.969 35.0000 1.378 70.0000 2.756 NG4R 0.60 1.32
      3753584 KM50TSNER3 KM50TSNER3 50.0000 1.969 35.0000 1.378 70.0000 2.756 NG3L 0.60 1.32
        3753585 KM50TSNER4 KM50TSNER4 50.0000 1.969 35.0000 1.378 70.0000 2.756 NG4L 0.60 1.32
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          KM50TS™ Schneidköpfe

          Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
          (2 Products)
          • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          3753586 KM50TSNRL3 KM50TSNRL3 50.0000 1.969 35.0000 1.378 70.0000 2.756 NU3R 0.57 1.26
            3753587 KM50TSNRR3 KM50TSNRR3 50.0000 1.969 35.0000 1.378 70.0000 2.756 NU3L 0.57 1.26
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              KM50TS™ Schneidköpfe

              Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
              (4 Products)
              • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3753588 KM50TSNSL3 KM50TSNSL3 50.0000 1.968 35.0000 1.378 NG3L 0.59 1.29
                3753589 KM50TSNSL4 KM50TSNSL4 60.0000 2.362 35.0000 1.378 NG4L 0.65 1.44
                  3753590 KM50TSNSR3 KM50TSNSR3 50.0000 1.968 35.0000 1.378 NG3R 0.59 1.29
                    3753591 KM50TSNSR4 KM50TSNSR4 60.0000 2.362 35.0000 1.378 NG4R 0.65 1.44
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor

                      SUPPORT

                      Hilfe zu Produkten
                      E-Mail-Adresse | 0800 1015774

                       

                      Hilfe bei Bestellungen

                      E-Mail-Adresse | 800.979.4342


                      Chat mit einem Experten  Available 8am-6pm EST

                      WIDIA WERBEARTIKEL

                      Karriere

                      Durchsuchen Sie unsere Stellenangebote

                      SOZIALE MEDIEN

                      BLEIBEN WIR IM KONTAKT

                      Bleiben wir im Kontakt

                      © 2019 WIDIA Product Group 2018, Privacy Policy

                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      Can’t find the file type you’re looking for?
                      Request Drawings »

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart