successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (2)
  • Turning Turning (6)
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Tool Cutting Edge Angle
  • 90.0 (2)
  • 93.0 (2)
  • 95.0 (2)
to
Connection Style
  • KM (4)
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (4)
  • 4.0 (2)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.038 (2)
  • 0.1 (4)
  • 0.2 (4)
  • 0.397 (2)
  • 0.4 (4)
  • 0.794 (4)
  • 0.8 (4)
  • 1.188 (2)
  • 1.2 (4)
  • 6.0 (2)
to
Corner Radius
  • 0.0015 (2)
  • 0.004 (4)
  • 0.008 (4)
  • 0.0156 (4)
  • 0.0158 (2)
  • 0.016 (2)
  • 0.0312 (4)
  • 0.0313 (4)
  • 0.0315 (4)
  • 0.0468 (2)
  • 0.0469 (4)
  • 0.047 (2)
  • 0.2362 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (2)
  • AC5 (2)
  • CM3 (2)
  • CM5 (2)
  • CPX (2)
  • HCK10 (2)
  • HK1500 (2)
  • HK35 (2)
  • HT2 (4)
  • HTX (4)
  • HWK15 (2)
  • K10M (4)
  • K10P (2)
  • K10U (2)
  • K15U (2)
  • K20K (2)
  • K313 (6)
  • K68 (6)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (2)
  • KBH10 (2)
  • KBH20 (4)
  • KC5010 (6)
  • KC5020P (2)
  • KC5025 (6)
  • KC5410 (6)
  • KC720 (4)
  • KC730 (6)
  • KC732 (6)
  • KC8050 (6)
  • KC810 (4)
  • KC850 (6)
  • KC9025 (4)
  • KC910 (6)
  • KC9105 (4)
  • KC9110 (6)
  • KC9125 (6)
  • KC9225 (4)
  • KC9240 (6)
  • KC9240NEW (6)
  • KC9315 (6)
  • KC9320 (6)
  • KC9325 (2)
  • KC935 (4)
  • KC950 (2)
  • KCD25 (4)
  • KCK05 (4)
  • KCK05B (2)
  • KCK15 (6)
  • KCK15B (6)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (4)
  • KCM15B (4)
  • KCM25 (6)
  • KCM25B (6)
  • KCM35 (4)
  • KCP05 (4)
  • KCP05B (2)
  • KCP10 (6)
  • KCP10B (6)
  • KCP15 (2)
  • KCP25 (6)
  • KCP25B (6)
  • KCP30 (6)
  • KCP30B (4)
  • KCP40B (2)
  • KCPK05 (2)
  • KCS10 (6)
  • KCS10B (6)
  • KCU10 (6)
  • KCU25 (6)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KT175 (2)
  • KT315 (4)
  • KT325 (4)
  • KTP10 (2)
  • KU10 (2)
  • KU10T (4)
  • KU30T (4)
  • KY1615 (2)
  • MC2 (2)
  • NL300 (2)
  • NL920 (2)
  • PB170 (2)
  • PB250 (2)
  • PD100 (2)
  • PD50 (2)
  • SP0PW3 (2)
  • SP4019 (2)
  • THM (6)
  • THM-X (2)
  • TN10P (4)
  • TN10U (4)
  • TN15M (4)
  • TN15U (2)
  • TN2000 (4)
  • TN20K (4)
  • TN20P (4)
  • TN30M (4)
  • TN4000 (2)
  • TN5015 (4)
  • TN5020 (6)
  • TN5105 (2)
  • TN5120 (6)
  • TN6010 (2)
  • TN7005 (2)
  • TN7010 (6)
  • TN7015 (6)
  • TN7025 (6)
  • TN7035 (6)
  • TN7105 (6)
  • TN7110 (6)
  • TN7115 (6)
  • TN7125 (6)
  • TN7135 (6)
  • TN8025 (2)
  • TTI15 (4)
  • TTM09 (2)
  • TTR (2)
  • TTX (2)
  • W00342 (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH25P (2)
  • WBH25U (2)
  • WBH30P (2)
  • WBK45U (2)
  • WDN25U (2)
  • WK05CT (2)
  • WK15CT (4)
  • WK20CT (6)
  • WM15CT (4)
  • WM25CT (4)
  • WP15CT (6)
  • WP20TT (2)
  • WP25CT (6)
  • WP35CT (6)
  • WS10PT (2)
  • WU10HT (6)
Hand Of Tool
  • L (2)
  • R (2)
Wiper Insert
  • N (6)
  • Y (2)
Minimum Axial Groove Diameter
  • 2.756 (2)
to
Minimum Axial Groove Diameter
  • 70.0 (2)
to
Cutting Direction
  • S (4)
Rake Angle Style
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
  • 50.0 (2)
to
Maximum Bore Depth
  • 1.969 (2)
to
frontEnd
Clamp Style
  • S (6)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • R-ROUND (2)
  • V-DIAMOND/RHOMBIC 35 (2)
insertGeometry
Cutting Tool Material
  • B H (4)
  • B L (4)
  • C A (2)
  • D P (4)
  • H T (6)
  • H W (6)
backEnd
Connection Type
  • TAPER SHANK (4)
System Size
  • KM50TS (4)
Back-End Diameter
  • 1.9685 (6)
to
Back-End Diameter
  • 50.0 (6)
to
other
Platform
  • KM50 (6)
Tool Unit
  • M (6)
Over All Length [L]
  • 50.0 (6)
to
Over All Length [L]
  • 1.9685 (4)
  • 1.969 (2)
to
Insert Hand
  • L (2)
  • N (6)
  • R (4)
Display Obsolete Products
  • false (6)
  • true (6)
Cutting Condition Material
  • H-All (6)
  • K-All (6)
  • M-All (6)
  • N-All (6)
  • P-All (6)
  • S-All (6)
  • S4 (2)
No filters matching ""
View Products in
Metric
Inch
KM50TS™ Cutting Units

S-Clamping
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3746593 KM50TSSCLCL12 KM50TSSCLCL12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CC..120408/CC..432 0.61 1.34
    3746594 KM50TSSCLCR12 KM50TSSCLCR12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CC..120408/CC..432 0.61 1.34
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM50TS™ Schneidköpfe

      S-Klemmung
      (2 Products)
      • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      3838582 KM50TSSRGCL12 KM50TSSRGCL12 50.0000 1.968 35.0000 1.378 RC..1204M0 0.65 1.43
        3746595 KM50TSSRGCR12 KM50TSSRGCR12 50.0000 1.968 35.0000 1.378 RC..1204M0 0.65 1.43
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM50TS™ Schneidköpfe

          S-Klemmung
          (2 Products)
          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          3746596 KM50TSSVJBL16 KM50TSSVJBL16 50.0000 1.968 35.0000 1.378 VB..160408/VB..332 0.51 1.13
            3746597 KM50TSSVJBR16 KM50TSSVJBR16 50.0000 1.968 35.0000 1.378 VB..160408/VB..332 0.51 1.13
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              We have found the following CAD Drawings

              Select the files you are looking for and download them all at once

              You should be logged to see your dashboard information
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart