Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (32)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (32)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (32)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (32)
  • N Non-Ferrous Materials (32)
    • N1
      Wrought Aluminum
      (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (32)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (23)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (23)
    • H1
      Hardened Materials 44-48 HRC
      (23)
    • H2
      Hardened Materials 48-55 HRC
      (23)
    • H3
      Hardened Materials 56-60 HRC
      (23)
    • H4
      Hardened Materials >60 HRC
      (23)
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (32)
  • Multiple Direction Cutting Multiple Direction Cutting (32)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (20)
  • Turning Turning (32)
Cutting Condition
  • Heavily Interrupted Cut (32)
  • Interrupted (28)
  • Lightly Interrupted Cut (32)
  • Smooth Cut (32)
  • Varying Depth of Cut (32)
Tool Cutting Edge Angle
  • 45.0 (4)
  • 63.0 (2)
  • 75.0 (10)
  • 93.0 (8)
  • 95.0 (6)
  • 107.5 (2)
to
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (18)
  • 3.0 (2)
  • 4.0 (30)
  • 6.0 (2)
  • 8.0 (18)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (10)
  • 0.102 (12)
  • 0.2 (10)
  • 0.203 (4)
  • 0.34 (8)
  • 0.397 (25)
  • 0.4 (27)
  • 0.406 (8)
  • 0.41 (6)
  • 0.6 (2)
  • 0.79 (7)
  • 0.792 (12)
  • 0.794 (25)
  • 0.8 (32)
  • 0.81 (6)
  • 1.188 (2)
  • 1.19 (4)
  • 1.191 (32)
  • 1.2 (32)
  • 1.587 (4)
  • 1.588 (15)
  • 1.6 (28)
  • 2.38 (2)
  • 2.4 (14)
  • 3.2 (2)
to
Corner Radius
  • 0.004 (18)
  • 0.008 (10)
  • 0.0083 (4)
  • 0.013 (8)
  • 0.0156 (27)
  • 0.016 (21)
  • 0.031 (30)
  • 0.0312 (25)
  • 0.0313 (32)
  • 0.0315 (4)
  • 0.032 (6)
  • 0.0468 (2)
  • 0.0469 (32)
  • 0.047 (28)
  • 0.0472 (4)
  • 0.0516 (7)
  • 0.0625 (28)
  • 0.063 (28)
  • 0.0938 (14)
  • 0.094 (7)
  • 0.126 (2)
  • 0.1563 (4)
  • 0.312 (8)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (21)
  • 241 (4)
  • CL4 (19)
  • CM2 (21)
  • CM3 (19)
  • CM4 (13)
  • CPX (21)
  • CW2 (12)
  • CW2015 (21)
  • CW5025 (28)
  • GX (11)
  • HK1500 (21)
  • HT2 (16)
  • HTX (4)
  • K060 (11)
  • K090 (26)
  • K1 (4)
  • K10M (23)
  • K10P (23)
  • K10U (13)
  • K15U (21)
  • K20K (28)
  • K21 (11)
  • K25M (25)
  • K25P (26)
  • K313 (32)
  • K35P (11)
  • K420 (18)
  • K45 (11)
  • K68 (26)
  • KB1340 (15)
  • KB1345 (4)
  • KB1610 (13)
  • KB1625 (11)
  • KB1630 (4)
  • KB5610 (6)
  • KB5625 (11)
  • KB5630 (4)
  • KB9610 (21)
  • KB9640 (17)
  • KBH10 (21)
  • KBH10B (12)
  • KBH20 (21)
  • KBH20B (12)
  • KBK35 (4)
  • KC210 (19)
  • KC250 (13)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (23)
  • KC5510 (32)
  • KC5525 (18)
  • KC710 (4)
  • KC720 (15)
  • KC722 (4)
  • KC730 (19)
  • KC7310 (32)
  • KC732 (15)
  • KC8050 (32)
  • KC810 (32)
  • KC850 (32)
  • KC9010 (32)
  • KC9025 (32)
  • KC910 (28)
  • KC9105 (32)
  • KC9110 (32)
  • KC9120 (32)
  • KC9125 (32)
  • KC9125RR (7)
  • KC9140 (32)
  • KC9145 (28)
  • KC9210 (8)
  • KC9215 (32)
  • KC9225 (32)
  • KC9240 (32)
  • KC9240NEW (32)
  • KC9245 (32)
  • KC9315 (32)
  • KC9320 (32)
  • KC9325 (32)
  • KC935 (32)
  • KC950 (28)
  • KC990 (32)
  • KCK05 (32)
  • KCK05B (27)
  • KCK15 (32)
  • KCK15B (32)
  • KCK20 (32)
  • KCK20B (32)
  • KCM15 (32)
  • KCM15B (32)
  • KCM25 (32)
  • KCM25B (32)
  • KCM35 (28)
  • KCM35B (28)
  • KCP05 (27)
  • KCP05B (25)
  • KCP10 (32)
  • KCP10B (32)
  • KCP25 (32)
  • KCP25B (32)
  • KCP30 (32)
  • KCP30B (28)
  • KCP40 (28)
  • KCP40B (28)
  • KCPK05 (32)
  • KCS10 (4)
  • KCS10B (32)
  • KCU10 (32)
  • KCU25 (32)
  • KD050 (11)
  • KD081 (11)
  • KD100 (4)
  • KD120 (11)
  • KD1400 (6)
  • KD1405 (4)
  • KD1425 (6)
  • KM1 (11)
  • KMF (4)
  • KT1120 (2)
  • KT125 (19)
  • KT150 (11)
  • KT175 (19)
  • KT315 (25)
  • KT325 (16)
  • KU10T (25)
  • KU30T (32)
  • KY1310 (20)
  • KY1320 (28)
  • KY1540 (11)
  • KY1615 (21)
  • KY2000 (13)
  • KY2100 (11)
  • KY3000 (26)
  • KY3400 (20)
  • KY3500 (28)
  • KY4000 (13)
  • KY4300 (6)
  • KY4400 (23)
  • KYK10 (13)
  • KYK25 (20)
  • KYK35 (28)
  • KYS25 (11)
  • KYS30 (13)
  • NL200 (12)
  • NL250 (32)
  • NL300 (26)
  • NL400 (8)
  • NL920 (26)
  • P25 (11)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (16)
  • SP0819 (21)
  • SP0A00 (7)
  • SP3019 (15)
  • SP4019 (13)
  • SP61EJ (7)
  • SPSREJ (5)
  • THM (19)
  • THM-X (11)
  • THMF-X (11)
  • TN10P (27)
  • TN10U (21)
  • TN15M (23)
  • TN15U (21)
  • TN2000 (21)
  • TN20K (28)
  • TN20P (32)
  • TN30M (27)
  • TN30P (28)
  • TN4000 (21)
  • TN5015 (32)
  • TN5020 (27)
  • TN5105 (25)
  • TN5120 (27)
  • TN6010 (12)
  • TN6025 (14)
  • TN7005 (18)
  • TN7010 (32)
  • TN7015 (32)
  • TN7025 (32)
  • TN7035 (28)
  • TN7105 (18)
  • TN7110 (27)
  • TN7115 (27)
  • TN7125 (32)
  • TN7135 (28)
  • TN8025 (27)
  • TTI15 (16)
  • TTM09 (7)
  • TTR (11)
  • TTS (19)
  • TTX (12)
  • WBH10C (12)
  • WBH10P (4)
  • WBH10U (11)
  • WBH25P (4)
  • WBH25U (19)
  • WBH30P (4)
  • WBK40U (15)
  • WBK45U (12)
  • WDN00U (4)
  • WDN25U (6)
  • WK05CT (32)
  • WK15CT (26)
  • WK20CT (32)
  • WM15CT (32)
  • WM25CT (32)
  • WM35CT (32)
  • WP05CT (6)
  • WP15CT (32)
  • WP20TT (4)
  • WP25CT (32)
  • WP35CT (32)
  • WS10PT (27)
  • WS25PT (32)
  • WU10HT (32)
  • X00511 (4)
Wiper Insert
  • N (32)
  • Y (16)
Minimum Axial Groove Diameter
  • 2.48 (16)
  • 3.15 (2)
  • 4.094 (2)
to
Minimum Axial Groove Diameter
  • 63.0 (16)
  • 80.0 (2)
  • 104.0 (2)
to
Maximum Bore Depth
  • 50.0 (20)
to
Maximum Bore Depth
  • 1.969 (20)
to
frontEnd
Clamp Style
  • P (32)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (6)
  • D-DIAMOND/RHOMBIC 55 (12)
  • S-SQUARE 90 (12)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (25)
  • B L (21)
  • C A (28)
  • C N (28)
  • D P (14)
  • H T (25)
  • H W (32)
backEnd
Back-End Diameter
  • 1.9685 (31)
  • 1.969 (1)
to
Back-End Diameter
  • 50.0 (32)
to
other
Platform
  • KM50 (32)
Tool Unit
  • M (26)
Over All Length [L]
  • 50.0 (32)
to
Over All Length [L]
  • 1.9685 (9)
  • 1.969 (23)
to
Insert Hand
  • N (32)
Cutting Condition Material
  • H-All (23)
  • K-All (32)
  • K1 (15)
  • M-All (32)
  • N-All (27)
  • P-All (32)
  • S-All (32)
  • S4 (4)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM50TS™ Schneidköpfe

P-Clamping
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3738513 KM50TSPCKNL12 KM50TSPCKNL12 50.0000 1.969 35.0000 1.378 63.0000 2.480 CN..120408/CN..432 0.68 1.50
    3738514 KM50TSPCKNR12 KM50TSPCKNR12 50.0000 1.969 35.0000 1.378 63.0000 2.480 CN..120408/CN..432 0.68 1.50
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      KM50TS™ Schneidköpfe

      P-Clamping
      (4 Products)
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
      3738516 KM50TSPCLNL12 KM50TSPCLNL12 50.0000 1.969 35.0000 1.378 63.0000 2.480 CN..120408/CN..432 0.63 1.39
        3738518 KM50TSPCLNL16 KM50TSPCLNL16 50.0000 1.969 35.0000 1.378 63.0000 2.480 CN..160612/CN..543 0.63 1.38
          3738517 KM50TSPCLNR12 KM50TSPCLNR12 50.0000 1.969 35.0000 1.378 63.0000 2.480 CN..120408/CN..432 0.63 1.39
            3738520 KM50TSPCLNR16 KM50TSPCLNR16 50.0000 1.969 35.0000 1.378 63.0000 2.480 CN..160612/CN..543 0.63 1.38
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              KM50TS™ Schneidköpfe

              P-Clamping
              (4 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3741362 KM50TSPDJNL11 KM50TSPDJNL11 50.0000 1.968 35.0000 1.378 DN..110408/DN..332 0.50 1.09
                3741388 KM50TSPDJNL15 KM50TSPDJNL15 50.0000 1.969 35.0000 1.378 DN..150608/DN..442 0.49 1.07
                  3741390 KM50TSPDJNR11 KM50TSPDJNR11 50.0000 1.968 35.0000 1.378 DN..110408/DN..332 0.50 1.09
                    3741392 KM50TSPDJNR15 KM50TSPDJNR15 50.0000 1.969 35.0000 1.378 DN..150608/DN..442 0.49 1.07
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      KM50TS™ Schneidköpfe

                      P-Clamping
                      (2 Products)
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      3741393 KM50TSPDNNL15 KM50TSPDNNL15 50.0000 1.968 0.0000 .0000 DN..150608/DN..442 0.43 0.94
                        3741394 KM50TSPDNNR15 KM50TSPDNNR15 50.0000 1.968 0.0000 .0000 DN..150608/DN..442 0.43 0.96
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          KM50TS™ Schneidköpfe

                          P-Klemmung
                          (2 Products)
                          • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                          3741395 KM50TSPDQNL11 KM50TSPDQNL11 50.0000 1.969 35.0000 1.378 63.0000 2.480 DN..110408/DN..332 0.57 1.25
                            3741396 KM50TSPDQNR11 KM50TSPDQNR11 50.0000 1.969 35.0000 1.378 63.0000 2.480 DN..110408/DN..332 0.57 1.25
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              KM50TS™ Schneidköpfe

                              P-Klemmung
                              (2 Products)
                              • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                              • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                              3741397 KM50TSPDUNL15 KM50TSPDUNL15 50.0000 1.969 35.0000 1.378 63.0000 2.480 DN..150608/DN..442 0.64 1.40
                                3741398 KM50TSPDUNR15 KM50TSPDUNR15 50.0000 1.969 35.0000 1.378 63.0000 2.480 DN..150608/DN..442 0.64 1.40
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  KM50TS™ Schneidköpfe

                                  P-Klemmung
                                  (2 Products)
                                  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [LPR] Protruding Length [LPR] Protruding Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                  3741399 KM50TSPDXNL15 KM50TSPDXNL15 50.0000 1.969 75.0000 2.952 52.0000 2.047 104.0000 4.094 DN..150608/DN..442 1.17 2.57
                                    3741400 KM50TSPDXNR15 KM50TSPDXNR15 50.0000 1.969 75.0000 2.952 52.0000 2.047 104.0000 4.094 DN..150608/DN..442 1.17 2.57
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      KM50TS™ Schneidköpfe

                                      P-Clamping
                                      (2 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                      3752980 KM50TSPSDNN12 KM50TSPSDNN12 50.0000 1.968 0.0000 .0000 SN..120408/SN..432 0.50 1.09
                                        3752981 KM50TSPSDNN15 KM50TSPSDNN15 50.0000 1.969 0.0000 .0000 SN..150612/SN..543 0.49 1.09
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          KM50TS™ Schneidköpfe

                                          P-Clamping
                                          (4 Products)
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                          3752982 KM50TSPSKNL12 KM50TSPSKNL12 50.0000 1.969 35.0000 1.378 63.0000 2.480 SN..120408/SN..432 0.69 1.52
                                            3753154 KM50TSPSKNL15 KM50TSPSKNL15 50.0000 1.969 35.0000 1.378 63.0000 2.480 SN..150612/SN..543 0.69 1.53
                                              3753153 KM50TSPSKNR12 KM50TSPSKNR12 50.0000 1.969 35.0000 1.378 63.0000 2.480 SN..120408/SN..432 0.69 1.52
                                                3753155 KM50TSPSKNR15 KM50TSPSKNR15 50.0000 1.969 35.0000 1.378 63.0000 2.480 SN..150612/SN..543 0.69 1.53
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  KM50TS™ Schneidköpfe

                                                  P-Klemmung
                                                  (4 Products)
                                                  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                  3752976 KM50TSPSRNL12 KM50TSPSRNL12 50.0000 1.968 30.0000 1.181 SN..120408/SN..432 0.61 1.34
                                                    3752978 KM50TSPSRNL15 KM50TSPSRNL15 50.0000 1.968 30.0000 1.181 SN..150612/SN..543 0.60 1.31
                                                      3752977 KM50TSPSRNR12 KM50TSPSRNR12 50.0000 1.968 30.0000 1.181 SN..120408/SN..432 0.61 1.34
                                                        3752979 KM50TSPSRNR15 KM50TSPSRNR15 50.0000 1.968 30.0000 1.181 SN..150612/SN..543 0.60 1.31
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          KM50TS™ Schneidköpfe

                                                          P-Clamping
                                                          (2 Products)
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                          3753156 KM50TSPSSNL12 KM50TSPSSNL12 50.0000 1.969 58.3300 2.296 35.0000 1.378 80.0000 3.150 SN..120408/SN..432 0.55 1.22
                                                            3753157 KM50TSPSSNR12 KM50TSPSSNR12 50.0000 1.969 58.3300 2.296 35.0000 1.378 80.0000 3.150 SN..120408/SN..432 0.55 1.22
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              KM50TS™ Schneidköpfe

                                                              P-Klemmung • S-Klemmung
                                                              (2 Products)
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                              3753158 KM50TSPWLNL08 KM50TSPWLNL08 50.0000 1.969 35.0000 1.378 63.0000 2.480 WN..080408/WN..432 0.62 1.36
                                                                3753159 KM50TSPWLNR08 KM50TSPWLNR08 50.0000 1.969 35.0000 1.378 63.0000 2.480 WN..080408/WN..432 0.62 1.36
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor

                                                                  SUPPORT

                                                                  Hilfe zu Produkten
                                                                  E-Mail-Adresse | 0800 1015774

                                                                   

                                                                  Hilfe bei Bestellungen

                                                                  E-Mail-Adresse | 800.979.4342


                                                                  Chat mit einem Experten  Available 8am-6pm EST

                                                                  WIDIA WERBEARTIKEL

                                                                  Karriere

                                                                  Durchsuchen Sie unsere Stellenangebote

                                                                  SOZIALE MEDIEN

                                                                  BLEIBEN WIR IM KONTAKT

                                                                  Bleiben wir im Kontakt

                                                                  © 2019 WIDIA Product Group 2018, Privacy Policy

                                                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                  You are about to create a duplicate . Do you want to proceed?
                                                                  You are about to delete Do you want to proceed?
                                                                  What would you like to rename your to?
                                                                  Please enter a valid name
                                                                  Please enter a name for the duplicate
                                                                  Please enter a valid name
                                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                                  Please enter a valid name
                                                                  Send a copy of

                                                                  Please enter a valid Email
                                                                  Please enter a valid name

                                                                  We have found the following CAD Drawings

                                                                  Select the files you are looking for and download them all at once

                                                                  Can’t find the file type you’re looking for?
                                                                  Request Drawings »

                                                                  You should be logged to see your dashboard information
                                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                  item(s) successfully added to the cart
                                                                  View Cart