successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (130)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (128)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (128)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (128)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (128)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (128)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (130)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (130)
  • M Stainless Steel (130)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (130)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (130)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (130)
  • K Cast Iron (142)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (142)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (142)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (142)
  • N Non-Ferrous Materials (128)
    • N1
      Wrought Aluminum
      (126)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (124)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (58)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (126)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (124)
    • N6
      Carbon, Graphite Composites, CFRP
      (109)
    • N7
      MMC's
      (124)
  • S High-Temp Alloys (140)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (140)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (140)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (140)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (128)
  • H Hardened Materials (123)
    • H1
      Hardened Materials 44-48 HRC
      (123)
    • H2
      Hardened Materials 48-55 HRC
      (114)
    • H3
      Hardened Materials 56-60 HRC
      (114)
    • H4
      Hardened Materials >60 HRC
      (97)
Applications
  • Back Boring Back Boring (23)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (23)
  • Blind Hole Finishing Blind Hole Finishing (23)
  • Chamfer Turning Chamfer Turning (64)
  • Cut-Off Cut-Off (23)
  • Deep Grooving Deep Grooving (23)
  • Face Grooving Face Grooving (23)
  • Facing Facing (128)
  • Grooving Grooving (8)
  • ID Facing ID Facing (4)
  • ID Grooving ID Grooving (23)
  • ID Thread Turning ID Thread Turning (23)
  • Multiple Direction Cutting Multiple Direction Cutting (138)
  • OD Thread Turning OD Thread Turning (23)
  • Plunge Turning Plunge Turning (68)
  • Profiling Profiling (97)
  • TRN Boring TRN Boring (98)
  • Threading Threading (23)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (23)
  • Through Hole Finishing Through Hole Finishing (23)
  • Turning Turning (139)
Type of Thread
  • 55 (9)
  • 60 (19)
  • ACME (19)
  • API (15)
  • API BUTTRESS (3)
  • API RD (12)
  • BSPT (6)
  • BSW (15)
  • BUTTRESS (10)
  • M (15)
  • NPT (12)
  • NPTF (6)
  • RD DIN 405 (9)
  • STUB ACME (15)
  • TR DIN 103 (9)
  • UN (16)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (117)
  • Interrupted (87)
  • Lightly Interrupted Cut (129)
  • Smooth Cut (131)
  • Varying Depth of Cut (131)
Tool Cutting Edge Angle
  • 45.0 (15)
  • 48.0 (3)
  • 49.783 (1)
  • 62.5 (2)
  • 63.0 (2)
  • 75.0 (34)
  • 85.0 (4)
  • 90.0 (32)
  • 93.0 (26)
  • 95.0 (18)
  • 107.5 (10)
to
Cutting Edges Per Insert
  • 1.0 (68)
  • 2.0 (77)
  • 3.0 (21)
  • 4.0 (95)
  • 6.0 (10)
  • 8.0 (68)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (3)
  • 0.03 (1)
  • 0.038 (3)
  • 0.051 (9)
  • 0.056 (1)
  • 0.057 (3)
  • 0.066 (6)
  • 0.07 (2)
  • 0.076 (15)
  • 0.08 (8)
  • 0.081 (1)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (2)
  • 0.089 (3)
  • 0.09 (3)
  • 0.091 (2)
  • 0.094 (6)
  • 0.097 (4)
  • 0.1 (47)
  • 0.102 (42)
  • 0.108 (1)
  • 0.116 (3)
  • 0.117 (3)
  • 0.127 (6)
  • 0.131 (6)
  • 0.132 (6)
  • 0.133 (6)
  • 0.135 (2)
  • 0.15 (6)
  • 0.152 (2)
  • 0.155 (6)
  • 0.157 (6)
  • 0.159 (2)
  • 0.16 (5)
  • 0.165 (10)
  • 0.173 (6)
  • 0.178 (8)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (6)
  • 0.2 (50)
  • 0.202 (6)
  • 0.203 (35)
  • 0.21 (2)
  • 0.223 (2)
  • 0.224 (6)
  • 0.235 (6)
  • 0.24 (2)
  • 0.244 (3)
  • 0.25 (6)
  • 0.251 (6)
  • 0.254 (10)
  • 0.255 (3)
  • 0.269 (8)
  • 0.279 (4)
  • 0.282 (6)
  • 0.284 (6)
  • 0.3 (6)
  • 0.305 (2)
  • 0.31 (2)
  • 0.315 (8)
  • 0.318 (12)
  • 0.33 (6)
  • 0.34 (21)
  • 0.343 (7)
  • 0.356 (6)
  • 0.381 (2)
  • 0.397 (75)
  • 0.4 (85)
  • 0.404 (6)
  • 0.406 (34)
  • 0.41 (14)
  • 0.43 (6)
  • 0.432 (3)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (6)
  • 0.508 (6)
  • 0.51 (2)
  • 0.533 (1)
  • 0.565 (2)
  • 0.57 (3)
  • 0.572 (10)
  • 0.575 (7)
  • 0.6 (4)
  • 0.64 (2)
  • 0.7 (1)
  • 0.76 (2)
  • 0.787 (6)
  • 0.79 (17)
  • 0.792 (26)
  • 0.794 (78)
  • 0.8 (115)
  • 0.81 (14)
  • 0.902 (10)
  • 0.93 (1)
  • 0.936 (1)
  • 0.97 (2)
  • 1.0 (6)
  • 1.01 (1)
  • 1.188 (10)
  • 1.19 (11)
  • 1.191 (99)
  • 1.194 (6)
  • 1.195 (3)
  • 1.2 (115)
  • 1.25 (6)
  • 1.404 (1)
  • 1.5 (6)
  • 1.515 (1)
  • 1.585 (6)
  • 1.587 (11)
  • 1.588 (75)
  • 1.59 (2)
  • 1.6 (100)
  • 1.75 (6)
  • 1.98 (3)
  • 1.981 (6)
  • 2.0 (10)
  • 2.25 (10)
  • 2.38 (8)
  • 2.381 (9)
  • 2.388 (10)
  • 2.39 (2)
  • 2.4 (48)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (4)
  • 3.2 (12)
  • 4.0 (2)
  • 6.0 (2)
  • 6.35 (4)
to
Corner Radius
  • 0.0012 (1)
  • 0.0015 (3)
  • 0.002 (9)
  • 0.0023 (3)
  • 0.0026 (6)
  • 0.0028 (4)
  • 0.003 (15)
  • 0.0031 (8)
  • 0.0032 (3)
  • 0.0033 (2)
  • 0.0034 (2)
  • 0.0035 (3)
  • 0.0037 (6)
  • 0.0038 (4)
  • 0.0039 (2)
  • 0.004 (61)
  • 0.0043 (1)
  • 0.0046 (6)
  • 0.005 (6)
  • 0.0052 (6)
  • 0.0053 (8)
  • 0.0059 (6)
  • 0.006 (8)
  • 0.0062 (6)
  • 0.0063 (3)
  • 0.0065 (10)
  • 0.0068 (6)
  • 0.007 (8)
  • 0.0075 (10)
  • 0.0078 (6)
  • 0.0079 (3)
  • 0.008 (54)
  • 0.0083 (13)
  • 0.0088 (8)
  • 0.0093 (6)
  • 0.0094 (2)
  • 0.0096 (3)
  • 0.0099 (6)
  • 0.01 (10)
  • 0.0106 (8)
  • 0.011 (4)
  • 0.0111 (6)
  • 0.0112 (6)
  • 0.0118 (6)
  • 0.012 (2)
  • 0.0122 (2)
  • 0.0124 (6)
  • 0.0125 (12)
  • 0.013 (21)
  • 0.0135 (10)
  • 0.014 (6)
  • 0.015 (2)
  • 0.0156 (85)
  • 0.0158 (2)
  • 0.0159 (6)
  • 0.016 (77)
  • 0.017 (9)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (6)
  • 0.02 (8)
  • 0.021 (1)
  • 0.022 (1)
  • 0.0225 (10)
  • 0.025 (2)
  • 0.0276 (1)
  • 0.0298 (2)
  • 0.031 (95)
  • 0.0312 (78)
  • 0.0313 (115)
  • 0.0315 (15)
  • 0.032 (14)
  • 0.0355 (10)
  • 0.0368 (1)
  • 0.0369 (1)
  • 0.038 (2)
  • 0.0394 (6)
  • 0.0398 (1)
  • 0.0468 (10)
  • 0.0469 (115)
  • 0.047 (96)
  • 0.0472 (11)
  • 0.0492 (6)
  • 0.0516 (17)
  • 0.0553 (1)
  • 0.0591 (6)
  • 0.0597 (1)
  • 0.0625 (110)
  • 0.063 (78)
  • 0.0689 (6)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.0938 (57)
  • 0.094 (31)
  • 0.0984 (4)
  • 0.106 (3)
  • 0.125 (6)
  • 0.126 (10)
  • 0.1563 (11)
  • 0.1575 (2)
  • 0.236 (2)
  • 0.2362 (2)
  • 0.25 (4)
  • 0.312 (15)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (79)
  • 241 (11)
  • AC5 (2)
  • CL4 (53)
  • CM2 (75)
  • CM3 (57)
  • CM4 (40)
  • CM5 (2)
  • CPX (74)
  • CW2 (30)
  • CW2015 (79)
  • CW3020 (2)
  • CW5025 (104)
  • GX (36)
  • HCK10 (2)
  • HCK20 (1)
  • HK1500 (59)
  • HK35 (2)
  • HT2 (34)
  • HTX (19)
  • HWK15 (2)
  • K060 (41)
  • K090 (95)
  • K1 (20)
  • K10M (87)
  • K10P (79)
  • K10U (56)
  • K15 (3)
  • K15U (71)
  • K20K (98)
  • K21 (40)
  • K25M (73)
  • K25P (82)
  • K2885 (6)
  • K313 (117)
  • K35P (45)
  • K420 (85)
  • K45 (50)
  • K4H (6)
  • K68 (112)
  • KB1340 (32)
  • KB1345 (36)
  • KB1610 (54)
  • KB1625 (50)
  • KB1630 (43)
  • KB5610 (33)
  • KB5625 (56)
  • KB5630 (29)
  • KB9610 (69)
  • KB9640 (38)
  • KBH10 (69)
  • KBH10B (46)
  • KBH20 (71)
  • KBH20B (46)
  • KBK35 (11)
  • KC210 (60)
  • KC250 (59)
  • KC5010 (123)
  • KC5020P (2)
  • KC5025 (125)
  • KC5410 (100)
  • KC5510 (98)
  • KC5525 (45)
  • KC710 (28)
  • KC720 (87)
  • KC722 (24)
  • KC730 (98)
  • KC7310 (98)
  • KC732 (74)
  • KC8050 (107)
  • KC810 (115)
  • KC850 (117)
  • KC9010 (98)
  • KC9025 (105)
  • KC910 (109)
  • KC9105 (102)
  • KC9110 (117)
  • KC9120 (107)
  • KC9125 (107)
  • KC9125RR (17)
  • KC9140 (101)
  • KC9145 (85)
  • KC9210 (15)
  • KC9215 (98)
  • KC9225 (102)
  • KC9240 (104)
  • KC9240NEW (104)
  • KC9245 (98)
  • KC9315 (106)
  • KC9320 (116)
  • KC9325 (102)
  • KC935 (115)
  • KC950 (109)
  • KC990 (101)
  • KCD25 (13)
  • KCK05 (104)
  • KCK05B (89)
  • KCK15 (106)
  • KCK15B (106)
  • KCK20 (116)
  • KCK20B (116)
  • KCM15 (102)
  • KCM15B (100)
  • KCM25 (104)
  • KCM25B (104)
  • KCM35 (98)
  • KCM35B (76)
  • KCP05 (85)
  • KCP05B (73)
  • KCP10 (107)
  • KCP10B (117)
  • KCP15 (2)
  • KCP25 (107)
  • KCP25B (116)
  • KCP30 (107)
  • KCP30B (91)
  • KCP40 (87)
  • KCP40B (91)
  • KCPK05 (96)
  • KCS10 (17)
  • KCS10B (98)
  • KCU10 (116)
  • KCU25 (114)
  • KD050 (55)
  • KD081 (58)
  • KD100 (37)
  • KD120 (60)
  • KD1400 (37)
  • KD1405 (29)
  • KD1425 (43)
  • KM1 (36)
  • KMF (11)
  • KT1120 (11)
  • KT125 (65)
  • KT150 (48)
  • KT175 (73)
  • KT315 (87)
  • KT325 (38)
  • KT5020 (4)
  • KTP10 (11)
  • KU10 (2)
  • KU10T (87)
  • KU25T (13)
  • KU30T (115)
  • KY1310 (78)
  • KY1320 (106)
  • KY1525 (2)
  • KY1540 (55)
  • KY1615 (96)
  • KY2000 (56)
  • KY2100 (39)
  • KY3000 (103)
  • KY3400 (86)
  • KY3500 (108)
  • KY4000 (43)
  • KY4300 (34)
  • KY4400 (85)
  • KYHK15B (12)
  • KYK10 (57)
  • KYK25 (84)
  • KYK35 (108)
  • KYS25 (53)
  • KYS30 (57)
  • MC2 (4)
  • MC3 (2)
  • NL200 (26)
  • NL250 (98)
  • NL300 (76)
  • NL400 (28)
  • NL920 (74)
  • P25 (33)
  • PB100 (11)
  • PB170 (13)
  • PB250 (13)
  • PB300 (11)
  • PD100 (2)
  • PD50 (2)
  • PN120 (2)
  • PS5 (30)
  • SP0819 (61)
  • SP0A00 (17)
  • SP0PW3 (2)
  • SP3019 (52)
  • SP4019 (44)
  • SP4036 (7)
  • SP4066 (1)
  • SP4093 (7)
  • SP61EJ (17)
  • SPADAP (6)
  • SPB400 (10)
  • SPN4W2 (2)
  • SPSREJ (11)
  • THM (65)
  • THM-X (30)
  • THMF-X (32)
  • TN10P (97)
  • TN10U (73)
  • TN15M (87)
  • TN15U (71)
  • TN2000 (63)
  • TN20K (100)
  • TN20P (105)
  • TN30M (91)
  • TN30P (88)
  • TN4000 (61)
  • TN5015 (86)
  • TN5020 (77)
  • TN5105 (68)
  • TN5120 (86)
  • TN6010 (54)
  • TN6025 (53)
  • TN7005 (45)
  • TN7010 (97)
  • TN7015 (97)
  • TN7025 (97)
  • TN7035 (84)
  • TN7105 (44)
  • TN7110 (85)
  • TN7115 (86)
  • TN7125 (88)
  • TN7135 (84)
  • TN8025 (82)
  • TTI15 (34)
  • TTM09 (27)
  • TTR (32)
  • TTR-X (2)
  • TTS (55)
  • TTX (34)
  • W00342 (4)
  • WBH10C (44)
  • WBH10P (29)
  • WBH10U (50)
  • WBH25P (33)
  • WBH25U (58)
  • WBH30P (29)
  • WBK40U (32)
  • WBK45U (41)
  • WDN00U (20)
  • WDN25U (37)
  • WK05CT (102)
  • WK15CT (66)
  • WK20CT (106)
  • WM15CT (102)
  • WM25CT (102)
  • WM35CT (98)
  • WP05CT (15)
  • WP15CT (107)
  • WP20TT (6)
  • WP25CT (107)
  • WP35CT (107)
  • WS10PT (89)
  • WS25PT (98)
  • WU10HT (99)
  • WU10PT (4)
  • WU25PT (3)
  • X00511 (11)
Wiper Insert
  • N (142)
  • Y (44)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 2.48 (16)
  • 2.7559 (1)
  • 2.756 (41)
  • 3.15 (8)
  • 3.386 (2)
  • 3.5 (2)
  • 3.543 (4)
  • 3.937 (12)
  • 4.094 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 63.0 (16)
  • 70.0 (42)
  • 80.0 (8)
  • 86.0 (2)
  • 88.9 (2)
  • 90.0 (4)
  • 100.0 (12)
  • 104.0 (2)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Maximum Bore Depth
  • 50.0 (85)
to
Maximum Bore Depth
  • 1.969 (85)
to
frontEnd
Clamp Style
  • C (2)
  • M (72)
  • N (22)
  • P (32)
  • S (19)
Adapter Front-End
  • CARTRIDGE MOUNT (4)
  • CUTOFF SUPPORT BLADE (2)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (27)
  • D-DIAMOND/RHOMBIC 55 (31)
  • LT-TRIANGLE LAY DOWN THREAD 60 (15)
  • R-ROUND (6)
  • S-SQUARE 90 (39)
  • T-TRIANGLE 60 (6)
  • TN-TOP NOTCH (10)
  • V-DIAMOND/RHOMBIC 35 (9)
  • W-TRIGON 80 (4)
Front End Type
  • KMC - Cartridge Mount Kenna (4)
  • PMK - Prismatic Adapter Kenna (2)
Cutting Width
  • 1.0 (6)
  • 1.19 (3)
  • 1.194 (6)
  • 1.2 (6)
  • 1.5 (6)
  • 1.57 (6)
  • 1.575 (6)
  • 1.75 (6)
  • 1.829 (6)
  • 1.981 (6)
  • 2.0 (6)
  • 2.2 (6)
  • 2.235 (6)
  • 2.24 (3)
  • 2.25 (3)
  • 2.388 (6)
  • 2.39 (3)
  • 2.464 (6)
  • 2.5 (6)
  • 2.667 (6)
  • 2.743 (6)
  • 2.75 (6)
  • 2.794 (6)
  • 2.997 (6)
  • 3.0 (10)
  • 3.099 (6)
  • 3.17 (6)
  • 3.175 (10)
  • 3.18 (2)
  • 3.2 (10)
  • 3.25 (6)
  • 3.251 (6)
  • 3.32 (3)
  • 3.329 (3)
  • 3.5 (10)
  • 3.607 (6)
  • 3.96 (6)
  • 3.962 (6)
  • 3.974 (3)
  • 3.988 (6)
  • 4.0 (10)
  • 4.24 (3)
  • 4.242 (10)
  • 4.25 (3)
  • 4.3 (6)
  • 4.5 (10)
  • 4.521 (6)
  • 4.699 (8)
  • 4.775 (10)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (6)
  • 4.801 (10)
  • 4.81 (6)
  • 4.88 (3)
  • 4.95 (6)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0394 (6)
  • 0.047 (6)
  • 0.0472 (6)
  • 0.0591 (6)
  • 0.062 (6)
  • 0.0689 (6)
  • 0.072 (6)
  • 0.078 (6)
  • 0.0787 (6)
  • 0.079 (3)
  • 0.0866 (6)
  • 0.088 (6)
  • 0.0886 (3)
  • 0.094 (6)
  • 0.097 (6)
  • 0.0984 (6)
  • 0.105 (6)
  • 0.108 (6)
  • 0.1083 (6)
  • 0.11 (6)
  • 0.118 (6)
  • 0.1181 (10)
  • 0.122 (6)
  • 0.125 (10)
  • 0.126 (10)
  • 0.128 (6)
  • 0.131 (3)
  • 0.1378 (10)
  • 0.142 (6)
  • 0.156 (6)
  • 0.157 (6)
  • 0.1574 (10)