successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

TopThread™ und TopGroove™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (20)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (20)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (20)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (20)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (20)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (20)
  • K Cast Iron (20)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (20)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (20)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (20)
  • N Non-Ferrous Materials (20)
    • N1
      Wrought Aluminum
      (20)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (20)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (20)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (20)
    • N6
      Carbon, Graphite Composites, CFRP
      (20)
    • N7
      MMC's
      (20)
  • S High-Temp Alloys (20)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (20)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (20)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (20)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (20)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
    • H2
      Hardened Materials 48-55 HRC
      (20)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (20)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (20)
  • Blind Hole Finishing Blind Hole Finishing (20)
  • Chamfer Turning Chamfer Turning (20)
  • Cut-Off Cut-Off (20)
  • Deep Grooving Deep Grooving (20)
  • Face Grooving Face Grooving (20)
  • Facing Facing (20)
  • Grooving Grooving (20)
  • ID Grooving ID Grooving (20)
  • ID Thread Turning ID Thread Turning (20)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • OD Thread Turning OD Thread Turning (20)
  • Plunge Turning Plunge Turning (20)
  • Profiling Profiling (20)
  • TRN Boring TRN Boring (20)
  • Threading Threading (20)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (20)
  • Through Hole Finishing Through Hole Finishing (20)
  • Turning Turning (20)
Type of Thread
  • 60 (20)
  • ACME (8)
  • API (8)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (20)
  • M (14)
  • NPT (8)
  • STUB ACME (8)
  • UN (20)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (20)
  • Lightly Interrupted Cut (20)
  • Smooth Cut (20)
  • Varying Depth of Cut (20)
Tool Cutting Edge Angle
  • 90.0 (20)
to
Connection Style
  • KM (20)
Cutting Edges Per Insert
  • 1.0 (20)
  • 2.0 (20)
to
cornerConfiguration
Corner Radius
  • 0.026 (4)
  • 0.051 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.076 (20)
  • 0.08 (20)
  • 0.089 (16)
  • 0.09 (16)
  • 0.094 (8)
  • 0.097 (4)
  • 0.1 (20)
  • 0.102 (20)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.155 (8)
  • 0.157 (8)
  • 0.165 (8)
  • 0.173 (8)
  • 0.178 (8)
  • 0.18 (6)
  • 0.185 (6)
  • 0.19 (20)
  • 0.191 (20)
  • 0.198 (8)
  • 0.2 (8)
  • 0.202 (14)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (8)
  • 0.255 (4)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.315 (8)
  • 0.318 (8)
  • 0.33 (8)
  • 0.34 (8)
  • 0.343 (10)
  • 0.356 (8)
  • 0.404 (8)
  • 0.406 (8)
  • 0.43 (8)
  • 0.445 (8)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (12)
  • 0.508 (8)
  • 0.57 (4)
  • 0.572 (8)
  • 0.575 (4)
  • 0.75 (12)
  • 0.787 (20)
  • 0.902 (8)
  • 1.0 (20)
  • 1.194 (20)
  • 1.195 (4)
  • 1.25 (20)
  • 1.5 (20)
  • 1.585 (8)
  • 1.588 (20)
  • 1.75 (20)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (8)
  • 2.25 (8)
  • 2.388 (8)
to
Corner Radius
  • 0.002 (4)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.003 (20)
  • 0.0031 (20)
  • 0.0035 (16)
  • 0.0037 (8)
  • 0.0038 (4)
  • 0.004 (20)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (8)
  • 0.0062 (8)
  • 0.0065 (8)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (20)
  • 0.0078 (8)
  • 0.0079 (4)
  • 0.008 (14)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (8)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.0124 (8)
  • 0.0125 (8)
  • 0.013 (8)
  • 0.0135 (14)
  • 0.014 (8)
  • 0.0159 (8)
  • 0.016 (8)
  • 0.017 (8)
  • 0.0175 (8)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (12)
  • 0.02 (8)
  • 0.0225 (8)
  • 0.0295 (12)
  • 0.031 (20)
  • 0.0355 (8)
  • 0.0394 (20)
  • 0.047 (20)
  • 0.0492 (20)
  • 0.0591 (20)
  • 0.0625 (20)
  • 0.0689 (20)
  • 0.078 (8)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.094 (8)
  • 0.106 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (20)
  • K313 (20)
  • K420 (20)
  • K4H (14)
  • K68 (20)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (8)
  • KC250 (20)
  • KC5010 (20)
  • KC5025 (20)
  • KC5410 (20)
  • KC710 (20)
  • KC720 (20)
  • KC722 (20)
  • KC730 (20)
  • KC732 (8)
  • KC810 (20)
  • KC850 (20)
  • KC910 (14)
  • KC9110 (20)
  • KC9120 (8)
  • KC9320 (20)
  • KC935 (20)
  • KC950 (20)
  • KCK20 (14)
  • KCK20B (20)
  • KCP10B (20)
  • KCP25B (20)
  • KCU10 (20)
  • KCU25 (20)
  • KD050 (4)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1425 (8)
  • KT175 (20)
  • KT315 (20)
  • KU10T (20)
  • KU25T (20)
  • KU30T (20)
  • KY3000 (8)
  • THM (20)
  • TN10P (14)
  • TN6010 (20)
  • TN6025 (20)
  • TN7110 (20)
  • WU10HT (4)
  • WU10PT (6)
  • WU25PT (4)
Hand Of Tool
  • L (10)
  • R (10)
Wiper Insert
  • N (20)
Minimum Axial Groove Diameter
  • 0.7283 (2)
  • 0.7874 (4)
  • 0.984 (1)
  • 0.9843 (1)
  • 1.2598 (4)
  • 1.3386 (4)
  • 1.5748 (4)
to
Minimum Axial Groove Diameter
  • 18.5 (2)
  • 20.0 (4)
  • 25.0 (2)
  • 32.0 (4)
  • 34.0 (4)
  • 40.0 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (20)
to
Maximum Axial Groove Diameter
  • 393.661 (20)
to
Cutting Direction
  • S (20)
Rake Angle Style
  • NEUTRAL (ZERO) (20)
Maximum Bore Depth
  • 42.03 (2)
  • 55.09 (4)
  • 56.11 (2)
  • 70.02 (2)
  • 75.04 (4)
  • 76.02 (2)
  • 80.0 (2)
  • 96.02 (2)
to
Maximum Bore Depth
  • 1.6547 (2)
  • 2.1689 (4)
  • 2.2091 (2)
  • 2.757 (2)
  • 2.9543 (4)
  • 2.9929 (2)
  • 3.15 (2)
  • 3.7803 (2)
to
Boring Bar Material
  • C (2)
  • S (18)
frontEnd
Clamp Style
  • N (20)
Insert Shape
  • TN-TOP NOTCH (20)
Cutting Width
  • 0.5 (12)
  • 0.787 (12)
  • 0.8 (12)
  • 0.889 (12)
  • 0.991 (12)
  • 1.0 (20)
  • 1.041 (12)
  • 1.19 (16)
  • 1.194 (20)
  • 1.199 (6)
  • 1.2 (20)
  • 1.39 (12)
  • 1.397 (12)
  • 1.4 (12)
  • 1.473 (12)
  • 1.5 (20)
  • 1.56 (6)
  • 1.57 (14)
  • 1.575 (20)
  • 1.69 (12)
  • 1.7 (12)
  • 1.702 (12)
  • 1.75 (20)
  • 1.829 (8)
  • 1.94 (12)
  • 1.95 (12)
  • 1.956 (12)
  • 1.981 (8)
  • 2.0 (20)
  • 2.007 (12)
  • 2.2 (20)
  • 2.235 (20)
  • 2.24 (16)
  • 2.25 (16)
  • 2.388 (20)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (20)
  • 2.667 (8)
  • 2.74 (12)
  • 2.743 (20)
  • 2.75 (20)
  • 2.794 (8)
  • 2.997 (20)
  • 3.0 (20)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (20)
  • 3.18 (6)
  • 3.2 (20)
  • 3.245 (12)
  • 3.25 (8)
  • 3.251 (20)
  • 3.27 (12)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (20)
  • 3.607 (8)
  • 3.73 (6)
  • 3.81 (12)
  • 3.84 (12)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (8)
  • 4.24 (4)
  • 4.242 (8)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (8)
  • 4.521 (8)
  • 4.699 (8)
  • 4.775 (8)
  • 4.8 (8)
  • 4.801 (8)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
to
Cutting Width
  • 0.0197 (12)
  • 0.031 (12)
  • 0.0315 (12)
  • 0.035 (12)
  • 0.039 (12)
  • 0.0394 (20)
  • 0.041 (12)
  • 0.047 (20)
  • 0.0472 (20)
  • 0.055 (12)
  • 0.0551 (12)
  • 0.058 (12)
  • 0.0591 (20)
  • 0.062 (20)
  • 0.0669 (12)
  • 0.067 (12)
  • 0.0689 (20)
  • 0.072 (8)
  • 0.076 (12)
  • 0.0768 (12)
  • 0.077 (12)
  • 0.078 (8)
  • 0.0787 (20)
  • 0.079 (16)
  • 0.0866 (20)
  • 0.088 (20)
  • 0.0886 (16)
  • 0.094 (20)
  • 0.097 (8)
  • 0.0984 (20)
  • 0.105 (8)
  • 0.108 (20)
  • 0.1083 (20)
  • 0.11 (8)
  • 0.118 (20)
  • 0.1181 (20)
  • 0.122 (8)
  • 0.125 (20)
  • 0.126 (20)
  • 0.1278 (12)
  • 0.128 (20)
  • 0.129 (12)
  • 0.131 (4)
  • 0.1378 (20)
  • 0.142 (8)
  • 0.147 (6)
  • 0.15 (12)
  • 0.151 (12)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (4)
  • 0.169 (8)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (8)
  • 0.185 (8)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (4)
  • 0.195 (8)
to
Maximum Cutting Depth
  • 3.51 (10)
  • 5.33 (8)
to
Maximum Cutting Depth
  • 0.138 (10)
  • 0.21 (8)
to
Insert Size
  • 2 (12)
  • 3 (8)
insertGeometry
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C N (8)
  • D P (8)
  • H T (20)
  • H W (20)
backEnd
Connection Type
  • TAPER SHANK (20)
System Size
  • KM40TS (20)
Back-End Diameter
  • 1.5748 (20)
to
Back-End Diameter
  • 40.0 (20)
to
other
Grade
  • KWH (2)
Platform
  • KM40 (20)
Tool Unit
  • I (20)
  • M (20)
Over All Length [L]
  • 70.0 (6)
  • 80.0 (2)
  • 90.0 (4)
  • 100.0 (4)
  • 110.0 (4)
to
Over All Length [L]
  • 2.7559 (6)
  • 3.1496 (2)
  • 3.543 (2)
  • 3.5433 (2)
  • 3.937 (4)
  • 4.3307 (4)
to
Insert Hand
  • L (10)
  • R (10)
Display Obsolete Products
  • false (20)
  • true (20)
Cutting Condition Material
  • H-All (20)
  • K-All (20)
  • M-All (20)
  • N-All (20)
  • P-All (20)
  • S-All (20)
No filters matching ""
View Products in
Metric
Inch
KM40TS™ Schneidköpfe zur Innenbearbeitung

Top Notch™ Gewindedrehen und Einstechdrehen • KM40TS Schneidköpfe
(2 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
  • I.D. Internal ThreadingI.D. Internal Threading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3951835 KM40TSE16JNEL2 KM40TSE16JNEL2 KWH 16.0000 .6299 20.0000 .7874 11.0000 .4331 80.0000 3.150 110.0000 4.330 NG2R 0.41 0.90
    3951836 KM40TSE16JNER2 KM40TSE16JNER2 KWH 16.0000 .6299 20.0000 .7874 11.0000 .4331 80.0000 3.150 110.0000 4.330 NG2L 0.41 0.90
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      KM40TS™ Schneidköpfe zur Innenbearbeitung

      Top Notch™ Gewindedrehen und Einstechdrehen • KM40TS Schneidköpfe
      (18 Products)
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
      3955480 KM40TSS12ENEL2 KM40TSS12ENEL2 12.0000 .4724 18.5000 .7283 11.0000 .4331 42.0300 1.654 70.0000 2.755 NG2R 0.27 0.59
        3955481 KM40TSS12ENER2 KM40TSS12ENER2 12.0000 .4724 18.5000 .7283 11.0000 .4331 42.0300 1.654 70.0000 2.755 NG2L 0.27 0.58
          3955482 KM40TSS16FNEL2 KM40TSS16FNEL2 16.0000 .6299 20.0000 .7874 11.0000 .4331 56.1100 2.209 80.0000 3.149 NG2R 0.28 0.62
            3955483 KM40TSS16FNER2 KM40TSS16FNER2 16.0000 .6299 20.0000 .7874 11.0000 .4331 56.1100 2.209 80.0000 3.149 NG2L 0.28 0.62
              3955484 KM40TSS20GNEL2 KM40TSS20GNEL2 20.0000 .7870 25.0000 .9840 13.0000 .5120 70.0200 2.757 90.0000 3.543 NG2R 0.35 0.76
                3955485 KM40TSS20GNER2 KM40TSS20GNER2 20.0000 .7874 25.0000 .9843 13.0000 .5120 70.0200 2.757 90.0000 3.543 NG2L 0.35 0.76
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart