successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

M-Klemmung

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (20)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (20)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (20)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (20)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (20)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (20)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (20)
  • K Cast Iron (20)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (20)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (20)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (20)
  • N Non-Ferrous Materials (20)
    • N1
      Wrought Aluminum
      (20)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (20)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (20)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (20)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (20)
    • N6
      Carbon, Graphite Composites, CFRP
      (20)
    • N7
      MMC's
      (20)
  • S High-Temp Alloys (20)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (20)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (20)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (20)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (20)
  • H Hardened Materials (20)
    • H1
      Hardened Materials 44-48 HRC
      (20)
    • H2
      Hardened Materials 48-55 HRC
      (20)
    • H3
      Hardened Materials 56-60 HRC
      (20)
    • H4
      Hardened Materials >60 HRC
      (20)
Applications
  • Back Boring Back Boring (20)
  • Facing Facing (20)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Profiling Profiling (20)
  • TRN Boring TRN Boring (20)
  • Turning Turning (20)
Cutting Condition
  • Heavily Interrupted Cut (20)
  • Interrupted (20)
  • Lightly Interrupted Cut (20)
  • Smooth Cut (20)
  • Varying Depth of Cut (20)
Tool Cutting Edge Angle
  • 93.0 (8)
  • 95.0 (12)
to
Connection Style
  • KM (20)
Cutting Edges Per Insert
  • 1.0 (20)
  • 2.0 (16)
  • 3.0 (4)
  • 4.0 (16)
  • 6.0 (4)
  • 8.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.1 (20)
  • 0.102 (16)
  • 0.2 (20)
  • 0.203 (16)
  • 0.397 (20)
  • 0.4 (20)
  • 0.406 (8)
  • 0.6 (4)
  • 0.792 (8)
  • 0.794 (20)
  • 0.8 (20)
  • 1.19 (8)
  • 1.191 (20)
  • 1.2 (20)
  • 1.587 (8)
  • 1.588 (20)
  • 1.6 (20)
  • 2.381 (8)
to
Corner Radius
  • 0.004 (20)
  • 0.008 (20)
  • 0.0083 (8)
  • 0.0156 (20)
  • 0.016 (20)
  • 0.031 (20)
  • 0.0312 (20)
  • 0.0313 (20)
  • 0.0315 (8)
  • 0.0469 (20)
  • 0.047 (20)
  • 0.0472 (8)
  • 0.0625 (20)
  • 0.063 (12)
  • 0.0938 (8)
  • 0.1563 (8)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (16)
  • 241 (8)
  • CL4 (8)
  • CM2 (16)
  • CM3 (8)
  • CM4 (8)
  • CPX (16)
  • CW2 (8)
  • CW2015 (16)
  • CW5025 (20)
  • GX (8)
  • HK1500 (12)
  • HT2 (8)
  • HTX (8)
  • K060 (16)
  • K090 (16)
  • K1 (8)
  • K10M (20)
  • K10P (20)
  • K10U (20)
  • K15U (20)
  • K20K (20)
  • K21 (8)
  • K25M (20)
  • K25P (20)
  • K313 (20)
  • K35P (12)
  • K420 (16)
  • K45 (16)
  • K68 (16)
  • KB1340 (8)
  • KB1345 (16)
  • KB1610 (20)
  • KB1625 (16)
  • KB1630 (16)
  • KB5610 (20)
  • KB5625 (16)
  • KB5630 (16)
  • KB9610 (20)
  • KB9640 (12)
  • KBH10 (20)
  • KBH10B (16)
  • KBH20 (20)
  • KBH20B (16)
  • KBK35 (8)
  • KC210 (16)
  • KC250 (16)
  • KC5010 (20)
  • KC5025 (20)
  • KC5410 (20)
  • KC5510 (20)
  • KC5525 (20)
  • KC710 (8)
  • KC720 (20)
  • KC722 (8)
  • KC730 (20)
  • KC7310 (20)
  • KC732 (20)
  • KC8050 (20)
  • KC810 (20)
  • KC850 (20)
  • KC9010 (20)
  • KC9025 (20)
  • KC910 (20)
  • KC9105 (20)
  • KC9110 (20)
  • KC9120 (20)
  • KC9125 (20)
  • KC9140 (20)
  • KC9145 (20)
  • KC9215 (20)
  • KC9225 (20)
  • KC9240 (20)
  • KC9240NEW (20)
  • KC9245 (20)
  • KC9315 (20)
  • KC9320 (20)
  • KC9325 (20)
  • KC935 (20)
  • KC950 (20)
  • KC990 (20)
  • KCD25 (8)
  • KCK05 (20)
  • KCK05B (20)
  • KCK15 (20)
  • KCK15B (20)
  • KCK20 (20)
  • KCK20B (20)
  • KCM15 (20)
  • KCM15B (20)
  • KCM25 (20)
  • KCM25B (20)
  • KCM35 (20)
  • KCM35B (12)
  • KCP05 (20)
  • KCP05B (20)
  • KCP10 (20)
  • KCP10B (20)
  • KCP25 (20)
  • KCP25B (20)
  • KCP30 (20)
  • KCP30B (20)
  • KCP40 (20)
  • KCP40B (20)
  • KCPK05 (20)
  • KCS10 (8)
  • KCS10B (20)
  • KCU10 (20)
  • KCU25 (20)
  • KD050 (16)
  • KD081 (16)
  • KD100 (16)
  • KD120 (16)
  • KD1400 (20)
  • KD1405 (16)
  • KD1425 (20)
  • KM1 (8)
  • KMF (8)
  • KT1120 (8)
  • KT125 (16)
  • KT150 (16)
  • KT175 (16)
  • KT315 (20)
  • KT325 (8)
  • KTP10 (8)
  • KU10T (20)
  • KU30T (20)
  • KY1310 (20)
  • KY1320 (20)
  • KY1540 (16)
  • KY1615 (16)
  • KY2000 (16)
  • KY2100 (16)
  • KY3000 (16)
  • KY3400 (20)
  • KY3500 (20)
  • KY4000 (8)
  • KY4300 (16)
  • KY4400 (20)
  • KYHK15B (20)
  • KYK10 (20)
  • KYK25 (20)
  • KYK35 (20)
  • KYS25 (16)
  • KYS30 (20)
  • NL200 (8)
  • NL250 (20)
  • NL300 (8)
  • NL400 (12)
  • NL920 (20)
  • P25 (8)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • PS5 (8)
  • SP0819 (12)
  • SP3019 (12)
  • SP4019 (8)
  • THM (8)
  • THM-X (8)
  • THMF-X (8)
  • TN10P (20)
  • TN10U (20)
  • TN15M (20)
  • TN15U (20)
  • TN2000 (12)
  • TN20K (20)
  • TN20P (20)
  • TN30M (20)
  • TN30P (20)
  • TN4000 (12)
  • TN5015 (12)
  • TN5020 (12)
  • TN5105 (20)
  • TN5120 (20)
  • TN6010 (16)
  • TN6025 (12)
  • TN7005 (20)
  • TN7010 (20)
  • TN7015 (20)
  • TN7025 (20)
  • TN7035 (12)
  • TN7105 (12)
  • TN7110 (12)
  • TN7115 (20)
  • TN7125 (12)
  • TN7135 (12)
  • TN8025 (20)
  • TTI15 (8)
  • TTR (8)
  • TTS (8)
  • TTX (8)
  • WBH10C (16)
  • WBH10P (16)
  • WBH10U (16)
  • WBH25P (16)
  • WBH25U (16)
  • WBH30P (16)
  • WBK40U (8)
  • WBK45U (16)
  • WDN00U (16)
  • WDN25U (20)
  • WK05CT (20)
  • WK15CT (12)
  • WK20CT (20)
  • WM15CT (20)
  • WM25CT (20)
  • WM35CT (20)
  • WP05CT (12)
  • WP15CT (20)
  • WP25CT (20)
  • WP35CT (20)
  • WS10PT (20)
  • WS25PT (20)
  • WU10HT (20)
  • X00511 (8)
Hand Of Tool
  • L (10)
  • R (10)
Wiper Insert
  • N (20)
  • Y (20)
Minimum Axial Groove Diameter
  • 1.2598 (10)
  • 1.5748 (10)
to
Minimum Axial Groove Diameter
  • 32.0 (10)
  • 40.0 (10)
to
Cutting Direction
  • B (12)
  • E (8)
Rake Angle Style
  • DOUBLE NEGATIVE (20)
Maximum Bore Depth
  • 55.09 (4)
  • 75.04 (6)
  • 76.02 (4)
  • 96.02 (6)
to
Maximum Bore Depth
  • 2.1689 (4)
  • 2.9543 (6)
  • 2.9929 (4)
  • 3.7803 (6)
to
Boring Bar Material
  • S (20)
frontEnd
Clamp Style
  • M (20)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (8)
  • W-TRIGON 80 (4)
insertGeometry
Cutting Tool Material
  • B H (20)
  • B L (20)
  • C A (20)
  • C N (20)
  • D P (20)
  • H T (20)
  • H W (20)
backEnd
Connection Type
  • TAPER SHANK (20)
System Size
  • KM40TS (20)
Back-End Diameter
  • 1.5748 (20)
to
Back-End Diameter
  • 40.0 (20)
to
other
Platform
  • KM40 (20)
Tool Unit
  • M (20)
Over All Length [L]
  • 70.0 (4)
  • 90.0 (4)
  • 100.0 (6)
  • 110.0 (6)
to
Over All Length [L]
  • 2.7559 (4)
  • 3.5433 (4)
  • 3.937 (6)
  • 4.3307 (6)
to
Insert Hand
  • N (20)
Display Obsolete Products
  • false (20)
  • true (20)
Cutting Condition Material
  • H-All (20)
  • K-All (20)
  • K1 (8)
  • M-All (20)
  • N-All (20)
  • P-All (20)
  • S-All (20)
  • S4 (16)
No filters matching ""
View Products in
Metric
Inch
KM40TS™ Internal Cutting Units

M-Clamping
(8 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3955548 KM40TSS25EMCLNL12 KM40TSS25EMCLNL12 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 CN..120408/CN..432 0.35 0.76
    3955549 KM40TSS25EMCLNR12 KM40TSS25EMCLNR12 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 CN..120408/CN..432 0.35 0.76
      3955550 KM40TSS25HMCLNL12 KM40TSS25HMCLNL12 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 CN..120408/CN..432 0.50 1.10
        3955551 KM40TSS25HMCLNR12 KM40TSS25HMCLNR12 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 CN..120408/CN..432 0.50 1.10
          3955552 KM40TSS32GMCLNL12 KM40TSS32GMCLNL12 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 CN..120408/CN..432 0.59 1.29
            3955553 KM40TSS32GMCLNR12 KM40TSS32GMCLNR12 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 CN..120408/CN..432 0.59 1.29
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM40TS™ Internal Cutting Units

              M-Clamping
              (8 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              3959374 KM40TSS25EMDUNL15 KM40TSS25EMDUNL15 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 DN..150408/DN..432 0.33 0.74
                3959375 KM40TSS25EMDUNR15 KM40TSS25EMDUNR15 25.0000 .9843 32.0000 1.259 17.0000 .6693 55.0900 2.168 70.0000 2.755 DN..150408/DN..432 0.33 0.74
                  3959376 KM40TSS25HMDUNL15 KM40TSS25HMDUNL15 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 DN..150408/DN..432 0.49 1.08
                    3959377 KM40TSS25HMDUNR15 KM40TSS25HMDUNR15 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 DN..150408/DN..432 0.49 1.07
                      3959378 KM40TSS32GMDUNL15 KM40TSS32GMDUNL15 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 DN..150408/DN..432 0.57 1.26
                        3959379 KM40TSS32GMDUNR15 KM40TSS32GMDUNR15 32.0000 1.259 40.0000 1.574 22.0000 .8661 76.0200 2.992 90.0000 3.543 DN..150408/DN..432 0.57 1.26
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          KM40TS™ Internal Cutting Units

                          M-Clamping
                          (4 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                          3959330 KM40TSS25HMWLNL08 KM40TSS25HMWLNL08 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 WN..080408/WN..432 0.50 1.10
                            3959331 KM40TSS25HMWLNR08 KM40TSS25HMWLNR08 25.0000 .9843 32.0000 1.259 17.0000 .6693 75.0400 2.954 100.0000 3.937 WN..080408/WN..432 0.50 1.10
                              3959332 KM40TSS32JMWLNL08 KM40TSS32JMWLNL08 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 WN..080408/WN..432 0.69 1.53
                                3959373 KM40TSS32JMWLNR08 KM40TSS32JMWLNR08 32.0000 1.259 40.0000 1.574 22.0000 .8661 96.0200 3.780 110.0000 4.330 WN..080408/WN..432 0.69 1.53
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty
                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                  You are about to create a duplicate . Do you want to proceed?
                                  You are about to delete Do you want to proceed?
                                  What would you like to rename your to?
                                  Please enter a valid name
                                  Please enter a name for the duplicate
                                  Please enter a valid name
                                  You are about to add to your My Solutions page. Do you want to proceed?
                                  Please enter a valid name
                                  Send a copy of

                                  Please enter a valid Email
                                  Please enter a valid name

                                  We have found the following CAD Drawings

                                  Select the files you are looking for and download them all at once

                                  You should be logged to see your dashboard information
                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                  item(s) successfully added to the cart
                                  View Cart