successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Top Notch® Gewindedrehen und Einstechen

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (14)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (14)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (14)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
    • N7
      MMC's
      (14)
  • S High-Temp Alloys (14)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (14)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (14)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (14)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (14)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC
      (14)
    • H2
      Hardened Materials 48-55 HRC
      (14)
    • H3
      Hardened Materials 56-60 HRC
      (10)
    • H4
      Hardened Materials >60 HRC
      (10)
Applications
  • Back Boring Back Boring (6)
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (6)
  • Facing Facing (14)
  • Grooving Grooving (12)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (12)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (14)
  • Threading Threading (6)
  • Turning Turning (14)
Type of Thread
  • 60 (14)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (14)
  • M (8)
  • NPT (6)
  • STUB ACME (6)
  • UN (14)
  • UNJ (6)
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (12)
to
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (14)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (3)
  • 0.051 (3)
  • 0.057 (3)
  • 0.066 (6)
  • 0.076 (14)
  • 0.08 (10)
  • 0.089 (7)
  • 0.09 (7)
  • 0.094 (6)
  • 0.097 (3)
  • 0.1 (10)
  • 0.102 (10)
  • 0.116 (3)
  • 0.117 (3)
  • 0.127 (6)
  • 0.131 (6)
  • 0.132 (6)
  • 0.133 (6)
  • 0.15 (6)
  • 0.155 (6)
  • 0.157 (6)
  • 0.16 (4)
  • 0.165 (10)
  • 0.173 (6)
  • 0.178 (6)
  • 0.18 (2)
  • 0.185 (2)
  • 0.19 (14)
  • 0.191 (14)
  • 0.198 (6)
  • 0.2 (6)
  • 0.202 (8)
  • 0.224 (6)
  • 0.235 (6)
  • 0.244 (3)
  • 0.25 (6)
  • 0.251 (6)
  • 0.254 (10)
  • 0.255 (3)
  • 0.269 (6)
  • 0.282 (6)
  • 0.284 (6)
  • 0.3 (6)
  • 0.315 (8)
  • 0.318 (10)
  • 0.33 (6)
  • 0.34 (6)
  • 0.343 (9)
  • 0.356 (6)
  • 0.404 (6)
  • 0.406 (6)
  • 0.43 (6)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (6)
  • 0.5 (4)
  • 0.508 (6)
  • 0.565 (2)
  • 0.57 (3)
  • 0.572 (10)
  • 0.575 (7)
  • 0.75 (4)
  • 0.787 (10)
  • 0.902 (10)
  • 1.0 (10)
  • 1.194 (10)
  • 1.195 (3)
  • 1.25 (10)
  • 1.5 (10)
  • 1.585 (6)
  • 1.588 (14)
  • 1.59 (2)
  • 1.75 (10)
  • 1.98 (3)
  • 1.981 (6)
  • 2.0 (10)
  • 2.25 (10)
  • 2.388 (10)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (3)
  • 0.0023 (3)
  • 0.0026 (6)
  • 0.003 (14)
  • 0.0031 (10)
  • 0.0035 (7)
  • 0.0037 (6)
  • 0.0038 (3)
  • 0.004 (10)
  • 0.0046 (6)
  • 0.005 (6)
  • 0.0052 (6)
  • 0.0053 (6)
  • 0.0059 (6)
  • 0.006 (6)
  • 0.0062 (6)
  • 0.0065 (10)
  • 0.0068 (6)
  • 0.007 (6)
  • 0.0075 (14)
  • 0.0078 (6)
  • 0.0079 (3)
  • 0.008 (8)
  • 0.0088 (6)
  • 0.0093 (6)
  • 0.0096 (3)
  • 0.0099 (6)
  • 0.01 (10)
  • 0.0106 (6)
  • 0.0111 (6)
  • 0.0112 (6)
  • 0.0118 (6)
  • 0.0124 (6)
  • 0.0125 (10)
  • 0.013 (6)
  • 0.0135 (12)
  • 0.014 (6)
  • 0.0159 (6)
  • 0.016 (6)
  • 0.017 (6)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (6)
  • 0.0197 (4)
  • 0.02 (6)
  • 0.0225 (10)
  • 0.0295 (4)
  • 0.031 (10)
  • 0.0355 (10)
  • 0.0394 (10)
  • 0.047 (10)
  • 0.0492 (10)
  • 0.0591 (10)
  • 0.0625 (14)
  • 0.0689 (10)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.094 (10)
  • 0.0984 (4)
  • 0.106 (3)
  • 0.125 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (14)
  • K420 (14)
  • K4H (8)
  • K68 (14)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KC250 (10)
  • KC5010 (14)
  • KC5025 (14)
  • KC5410 (14)
  • KC710 (14)
  • KC720 (14)
  • KC722 (14)
  • KC730 (14)
  • KC732 (6)
  • KC810 (14)
  • KC850 (14)
  • KC910 (8)
  • KC9110 (14)
  • KC9120 (6)
  • KC9320 (14)
  • KC935 (14)
  • KC950 (14)
  • KCK20 (12)
  • KCK20B (14)
  • KCP10B (14)
  • KCP25B (14)
  • KCU10 (14)
  • KCU25 (14)
  • KD050 (3)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (10)
  • KT315 (14)
  • KU10T (14)
  • KU25T (14)
  • KU30T (14)
  • KY3000 (10)
  • THM (10)
  • TN10P (10)
  • TN6010 (14)
  • TN6025 (14)
  • TN7110 (14)
  • WU10HT (3)
  • WU10PT (6)
  • WU25PT (3)
Wiper Insert
  • N (14)
Minimum Axial Groove Diameter
  • 0.0 (6)
  • 1.626 (2)
  • 1.874 (2)
  • 2.126 (8)
  • 2.229 (2)
  • 2.252 (2)
  • 3.5 (4)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (6)
  • 41.3 (2)
  • 47.6 (2)
  • 54.0 (8)
  • 56.625 (2)
  • 57.2 (2)
  • 88.9 (4)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (14)
to
Maximum Axial Groove Diameter
  • 393.661 (14)
to
Maximum Bore Depth
  • 40.0 (6)
  • 45.0 (2)
to
Maximum Bore Depth
  • 1.575 (6)
  • 1.772 (2)
to
frontEnd
Clamp Style
  • N (14)
Insert Shape
  • TN-TOP NOTCH (14)
Cutting Width
  • 0.5 (4)
  • 0.787 (4)
  • 0.8 (4)
  • 0.889 (4)
  • 0.991 (4)
  • 1.0 (10)
  • 1.041 (4)
  • 1.19 (7)
  • 1.194 (10)
  • 1.199 (2)
  • 1.2 (10)
  • 1.39 (4)
  • 1.397 (4)
  • 1.4 (4)
  • 1.473 (4)
  • 1.5 (10)
  • 1.56 (2)
  • 1.57 (8)
  • 1.575 (10)
  • 1.69 (4)
  • 1.7 (4)
  • 1.702 (4)
  • 1.75 (10)
  • 1.829 (6)
  • 1.94 (4)
  • 1.95 (4)
  • 1.956 (4)
  • 1.981 (6)
  • 2.0 (10)
  • 2.007 (4)
  • 2.2 (10)
  • 2.235 (10)
  • 2.24 (7)
  • 2.25 (7)
  • 2.388 (10)
  • 2.39 (3)
  • 2.464 (6)
  • 2.5 (10)
  • 2.667 (6)
  • 2.74 (4)
  • 2.743 (10)
  • 2.75 (10)
  • 2.794 (6)
  • 2.997 (10)
  • 3.0 (14)
  • 3.099 (6)
  • 3.17 (6)
  • 3.175 (14)
  • 3.18 (4)
  • 3.2 (14)
  • 3.245 (4)
  • 3.25 (6)
  • 3.251 (10)
  • 3.27 (4)
  • 3.32 (3)
  • 3.329 (3)
  • 3.5 (14)
  • 3.607 (6)
  • 3.73 (2)
  • 3.81 (4)
  • 3.84 (4)
  • 3.96 (6)
  • 3.962 (6)
  • 3.974 (3)
  • 3.988 (6)
  • 4.0 (10)
  • 4.24 (3)
  • 4.242 (10)
  • 4.25 (3)
  • 4.3 (6)
  • 4.5 (10)
  • 4.521 (6)
  • 4.699 (8)
  • 4.775 (10)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (6)
  • 4.801 (10)
  • 4.81 (6)
  • 4.88 (3)
  • 4.95 (6)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (4)
  • 0.031 (4)
  • 0.0315 (4)
  • 0.035 (4)
  • 0.039 (4)
  • 0.0394 (10)
  • 0.041 (4)
  • 0.047 (10)
  • 0.0472 (10)
  • 0.055 (4)
  • 0.0551 (4)
  • 0.058 (4)
  • 0.0591 (10)
  • 0.062 (10)
  • 0.0669 (4)
  • 0.067 (4)
  • 0.0689 (10)
  • 0.072 (6)
  • 0.076 (4)
  • 0.0768 (4)
  • 0.077 (4)
  • 0.078 (6)
  • 0.0787 (10)
  • 0.079 (7)
  • 0.0866 (10)
  • 0.088 (10)
  • 0.0886 (7)
  • 0.094 (10)
  • 0.097 (6)
  • 0.0984 (10)
  • 0.105 (6)
  • 0.108 (10)
  • 0.1083 (10)
  • 0.11 (6)
  • 0.118 (10)
  • 0.1181 (14)
  • 0.122 (6)
  • 0.125 (14)
  • 0.126 (14)
  • 0.1278 (4)
  • 0.128 (10)
  • 0.129 (4)
  • 0.131 (3)
  • 0.1378 (14)
  • 0.142 (6)
  • 0.147 (2)
  • 0.15 (4)
  • 0.151 (4)
  • 0.156 (6)
  • 0.157 (6)
  • 0.1574 (10)
  • 0.1575 (10)
  • 0.167 (10)
  • 0.1673 (3)
  • 0.169 (6)
  • 0.1771 (10)
  • 0.1772 (10)
  • 0.178 (6)
  • 0.185 (8)
  • 0.188 (10)
  • 0.189 (10)
  • 0.192 (3)
  • 0.195 (6)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 3.51 (2)
  • 7.47 (2)
to
Maximum Cutting Depth
  • 0.138 (2)
  • 0.294 (2)
to
Insert Size
  • 2 (4)
  • 3 (6)
  • 4 (4)
insertGeometry
Cutting Tool Material
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (14)
  • H W (14)
backEnd
Back-End Diameter
  • 1.5748 (12)
  • 1.575 (2)
to
Back-End Diameter
  • 40.0 (14)
to
other
Platform
  • KM40 (14)
Tool Unit
  • M (14)
Over All Length [L]
  • 40.0 (8)
  • 45.0 (2)
  • 47.0 (4)
to
Over All Length [L]
  • 1.5748 (2)
  • 1.575 (6)
  • 1.772 (2)
  • 1.85 (3)
  • 1.8504 (1)
to
Insert Hand
  • L (7)
  • R (7)
Cutting Condition Material
  • H-All (14)
  • K-All (14)
  • M-All (14)
  • N-All (14)
  • P-All (14)
  • S-All (14)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
Gewindedrehen

Top Notch™ Gewindedrehen und Einstechdrehen • KM40TS™ Schneidköpfe
(6 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3902132 KM40TSNEL2 KM40TSNEL2 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG2R 0.30 0.66
    3902283 KM40TSNEL3 KM40TSNEL3 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG3R 0.30 0.67
      3902284 KM40TSNEL4 KM40TSNEL4 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG4R 0.30 0.65
        3902285 KM40TSNER2 KM40TSNER2 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG2L 0.30 0.66
          3902286 KM40TSNER3 KM40TSNER3 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG3L 0.30 0.67
            3902287 KM40TSNER4 KM40TSNER4 40.0000 1.575 27.0000 1.063 54.0000 2.126 NG4L 0.30 0.65
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Gewindedrehen

              Top Notch™ Gewindedrehen und Einstechdrehen • KM40TS™ Schneidköpfe
              (2 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
              3902288 KM40TSNRL3045M KM40TSNRL3045M 45.0000 1.772 27.0000 1.063 54.0000 2.126 NU3R 0.33 0.74
                3902289 KM40TSNRR3045M KM40TSNRR3045M 45.0000 1.772 27.0000 1.063 54.0000 2.126 NU3L 0.34 0.75
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty
                  Gewindedrehen

                  Top Notch™ Gewindedrehen und Einstechdrehen • KM40TS™ Schneidköpfe
                  (6 Products)
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  3902290 KM40TSNSL2 KM40TSNSL2 40.0000 1.574 27.0000 1.063 NG2L 0.32 0.70
                    3902291 KM40TSNSL3 KM40TSNSL3 47.0000 1.850 27.0000 1.063 NG3L 0.33 0.72
                      3902292 KM40TSNSL4 KM40TSNSL4 47.0000 1.850 27.0000 1.063 NG4L 0.30 0.66
                        3902293 KM40TSNSR2 KM40TSNSR2 40.0000 1.574 27.0000 1.063 NG2R 0.32 0.70
                          3902294 KM40TSNSR3 KM40TSNSR3 47.0000 1.850 27.0000 1.063 NG3R 0.32 0.71
                            3902295 KM40TSNSR4 KM40TSNSR4 47.0000 1.850 27.0000 1.063 NG4R 0.30 0.66
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty
                              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                              You are about to create a duplicate . Do you want to proceed?
                              You are about to delete Do you want to proceed?
                              What would you like to rename your to?
                              Please enter a valid name
                              Please enter a name for the duplicate
                              Please enter a valid name
                              You are about to add to your My Solutions page. Do you want to proceed?
                              Please enter a valid name
                              Send a copy of

                              Please enter a valid Email
                              Please enter a valid name

                              We have found the following CAD Drawings

                              Select the files you are looking for and download them all at once

                              You should be logged to see your dashboard information
                              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                              item(s) successfully added to the cart
                              View Cart