successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (15)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (15)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (15)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (15)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (15)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (15)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (15)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (15)
  • M Stainless Steel (15)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (15)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (15)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (15)
  • K Cast Iron (15)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (15)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (15)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (15)
  • N Non-Ferrous Materials (15)
    • N1
      Wrought Aluminum
      (15)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (15)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (15)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (15)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (15)
    • N6
      Carbon, Graphite Composites, CFRP
      (15)
    • N7
      MMC's
      (15)
  • S High-Temp Alloys (15)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (15)
  • H Hardened Materials (15)
    • H1
      Hardened Materials 44-48 HRC
      (15)
    • H2
      Hardened Materials 48-55 HRC
      (15)
    • H3
      Hardened Materials 56-60 HRC
      (15)
    • H4
      Hardened Materials >60 HRC
      (15)
Applications
  • Back Boring Back Boring (15)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (2)
  • Blind Hole Finishing Blind Hole Finishing (2)
  • Chamfer Turning Chamfer Turning (2)
  • Cut-Off Cut-Off (2)
  • Deep Grooving Deep Grooving (2)
  • Face Grooving Face Grooving (2)
  • Facing Facing (15)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (15)
  • OD Thread Turning OD Thread Turning (2)
  • Plunge Turning Plunge Turning (2)
  • Profiling Profiling (15)
  • TRN Boring TRN Boring (15)
  • Threading Threading (2)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (2)
  • Through Hole Finishing Through Hole Finishing (2)
  • Turning Turning (15)
Cutting Condition
  • Heavily Interrupted Cut (15)
  • Lightly Interrupted Cut (15)
  • Smooth Cut (15)
  • Varying Depth of Cut (15)
Tool Cutting Edge Angle
  • 93.0 (6)
  • 95.0 (9)
to
Cutting Edges Per Insert
  • 1.0 (15)
  • 2.0 (15)
  • 4.0 (9)
to
cornerConfiguration
Corner Radius
  • 0.1 (10)
  • 0.2 (15)
  • 0.203 (8)
  • 0.397 (15)
  • 0.4 (15)
  • 0.794 (7)
  • 0.8 (15)
  • 1.19 (2)
  • 1.2 (5)
to
Corner Radius
  • 0.004 (10)
  • 0.008 (15)
  • 0.0156 (15)
  • 0.0312 (7)
  • 0.0313 (15)
  • 0.0469 (5)
  • 0.047 (2)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CG5 (5)
  • CM1 (5)
  • K313 (15)
  • K68 (15)
  • KB1345 (2)
  • KB1610 (11)
  • KB1625 (2)
  • KB1630 (7)
  • KB5610 (9)
  • KB5625 (6)
  • KB5630 (5)
  • KB9610 (11)
  • KC250 (4)
  • KC5010 (15)
  • KC5025 (15)
  • KC5410 (15)
  • KC710 (4)
  • KC720 (15)
  • KC730 (15)
  • KC7310 (4)
  • KC732 (15)
  • KC8050 (15)
  • KC810 (15)
  • KC850 (15)
  • KC9010 (11)
  • KC9025 (15)
  • KC910 (15)
  • KC9105 (11)
  • KC9110 (15)
  • KC9120 (11)
  • KC9125 (15)
  • KC9225 (15)
  • KC9240 (15)
  • KC9240NEW (15)
  • KC9315 (15)
  • KC9320 (11)
  • KC9325 (11)
  • KC935 (15)
  • KC950 (11)
  • KC990 (15)
  • KCD25 (15)
  • KCK05 (15)
  • KCK05B (2)
  • KCK15 (11)
  • KCK15B (11)
  • KCK20 (15)
  • KCK20B (15)
  • KCM15 (15)
  • KCM15B (9)
  • KCM25 (15)
  • KCM25B (11)
  • KCM35 (7)
  • KCP05 (15)
  • KCP10 (15)
  • KCP10B (15)
  • KCP25 (15)
  • KCP25B (15)
  • KCP30 (15)
  • KCPK05 (4)
  • KCS10 (15)
  • KCS10B (15)
  • KCU10 (15)
  • KCU25 (15)
  • KD050 (11)
  • KD100 (15)
  • KD105 (9)
  • KD120 (11)
  • KD1400 (15)
  • KD1405 (15)
  • KD1425 (15)
  • KT125 (4)
  • KT150 (4)
  • KT175 (15)
  • KT315 (15)
  • KTP10 (15)
  • KU10 (9)
  • KU10T (15)
  • KU30T (11)
  • W00162 (4)
  • WBH10C (5)
  • WBH10P (9)
  • WBH10U (9)
  • WBH25P (13)
  • WBH30P (9)
  • WDN00U (15)
  • WDN25U (15)
  • WK20CT (11)
  • WM15CT (13)
  • WM25CT (9)
  • WP15CT (9)
  • WP25CT (15)
Wiper Insert
  • N (15)
  • Y (15)
Minimum Axial Groove Diameter
  • 0.5118 (2)
  • 0.6299 (1)
  • 0.63 (2)
  • 0.7874 (3)
  • 0.9843 (4)
  • 1.2598 (3)
to
Minimum Axial Groove Diameter
  • 13.0 (2)
  • 16.0 (3)
  • 20.0 (3)
  • 25.0 (4)
  • 32.0 (3)
to
Maximum Bore Depth
  • 35.0 (2)
  • 42.0 (1)
  • 43.21 (2)
  • 56.0 (3)
  • 58.0 (3)
  • 60.0 (4)
to
Maximum Bore Depth
  • 1.378 (2)
  • 1.6535 (1)
  • 1.701 (2)
  • 2.2047 (3)
  • 2.2835 (3)
  • 2.3622 (4)
to
frontEnd
Clamp Style
  • S (15)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (9)
  • D-DIAMOND/RHOMBIC 55 (6)
Maximum Cutting Depth
  • 3.0 (4)
  • 4.5 (2)
to
Maximum Cutting Depth
  • 0.1181 (4)
  • 0.1772 (2)
to
insertGeometry
Cutting Tool Material
  • B H (11)
  • B L (15)
  • D P (15)
  • H T (15)
  • H W (15)
backEnd
Back-End Diameter
  • 1.2598 (15)
to
Back-End Diameter
  • 32.0 (15)
to
other
Platform
  • KM32 (14)
Tool Unit
  • M (15)
Over All Length [L]
  • 50.0 (2)
  • 60.0 (3)
  • 70.0 (6)
  • 80.0 (4)
to
Over All Length [L]
  • 1.9685 (2)
  • 2.362 (2)
  • 2.3622 (1)
  • 2.7559 (6)
  • 3.1496 (4)
to
Insert Hand
  • N (15)
Cutting Condition Material
  • H-All (7)
  • K-All (15)
  • M-All (15)
  • N-All (15)
  • P-All (15)
  • S-All (15)
  • S4 (15)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1144615 KM32TSS10CSCLPL06 KM32TSS10CSCLPL06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
    1144614 KM32TSS10CSCLPR06 KM32TSS10CSCLPR06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
      1144617 KM32TSS12DSCLPL06 KM32TSS12DSCLPL06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
        1144616 KM32TSS12DSCLPR06 KM32TSS12DSCLPR06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
          1144619 KM32TSS16ESCLPL09 KM32TSS16ESCLPL09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
            1144618 KM32TSS16ESCLPR09 KM32TSS16ESCLPR09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
              1020683 KM32TSS12DSDUPL07 KM32TSS12DSDUPL07 16.0000 .6299 9.0000 .3543 42.0000 1.653 60.0000 2.362 DP..070204/DP..2151
                1020725 KM32TSS16ESDUPL07 KM32TSS16ESDUPL07 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 DP..070204/DP..2151
                  1144658 KM32TSS20FSDUPL07 KM32TSS20FSDUPL07 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 DP..070204/DP..2151
                    1144657 KM32TSS20FSDUPR07 KM32TSS20FSDUPR07 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 DP..070204/DP..2151
                      1144746 KM32TSS25ESDUPL11 KM32TSS25ESDUPL11 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 DP..11T308/DP..3252
                        1144743 KM32TSS25ESDUPR11 KM32TSS25ESDUPR11 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 DP..11T308/DP..3252
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart