successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (5)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (5)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (5)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (5)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (5)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (5)
  • M Stainless Steel (5)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5)
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5)
  • N Non-Ferrous Materials (5)
    • N1
      Wrought Aluminum
      (5)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (5)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (5)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (5)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (5)
    • N6
      Carbon, Graphite Composites, CFRP
      (5)
    • N7
      MMC's
      (5)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Applications
  • Back Boring Back Boring (3)
  • Facing Facing (5)
  • Multiple Direction Cutting Multiple Direction Cutting (5)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (4)
  • Turning Turning (5)
Cutting Condition
  • Heavily Interrupted Cut (5)
  • Interrupted (5)
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (5)
Tool Cutting Edge Angle
  • 93.0 (1)
  • 95.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (5)
  • 4.0 (5)
  • 8.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.1 (5)
  • 0.102 (5)
  • 0.2 (5)
  • 0.203 (5)
  • 0.397 (5)
  • 0.4 (5)
  • 0.406 (1)
  • 0.41 (1)
  • 0.792 (4)
  • 0.794 (5)
  • 0.8 (5)
  • 0.81 (1)
  • 1.19 (4)
  • 1.191 (5)
  • 1.2 (5)
  • 1.587 (4)
  • 1.588 (5)
  • 1.6 (5)
  • 2.381 (1)
to
Corner Radius
  • 0.004 (5)
  • 0.008 (5)
  • 0.0083 (4)
  • 0.0156 (5)
  • 0.016 (5)
  • 0.031 (5)
  • 0.0312 (5)
  • 0.0313 (5)
  • 0.0315 (4)
  • 0.032 (1)
  • 0.0469 (5)
  • 0.047 (5)
  • 0.0472 (4)
  • 0.0625 (5)
  • 0.063 (4)
  • 0.0938 (1)
  • 0.1563 (4)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (5)
  • 241 (4)
  • CL4 (4)
  • CM2 (5)
  • CM3 (4)
  • CM4 (4)
  • CPX (5)
  • CW2 (4)
  • CW2015 (5)
  • CW5025 (5)
  • GX (4)
  • HK1500 (4)
  • HT2 (4)
  • HTX (4)
  • K060 (5)
  • K090 (5)
  • K1 (4)
  • K10M (5)
  • K10P (5)
  • K10U (5)
  • K15U (5)
  • K20K (5)
  • K21 (4)
  • K25M (5)
  • K25P (5)
  • K313 (5)
  • K35P (1)
  • K420 (5)
  • K45 (5)
  • K68 (5)
  • KB1340 (3)
  • KB1345 (5)
  • KB1610 (5)
  • KB1625 (5)
  • KB1630 (5)
  • KB5610 (5)
  • KB5625 (5)
  • KB5630 (5)
  • KB9610 (5)
  • KB9640 (4)
  • KBH10 (5)
  • KBH10B (5)
  • KBH20 (5)
  • KBH20B (5)
  • KBK35 (4)
  • KC210 (5)
  • KC250 (5)
  • KC5010 (5)
  • KC5025 (5)
  • KC5410 (5)
  • KC5510 (5)
  • KC5525 (5)
  • KC710 (4)
  • KC720 (5)
  • KC722 (4)
  • KC730 (5)
  • KC7310 (5)
  • KC732 (5)
  • KC8050 (5)
  • KC810 (5)
  • KC850 (5)
  • KC9010 (5)
  • KC9025 (5)
  • KC910 (5)
  • KC9105 (5)
  • KC9110 (5)
  • KC9120 (5)
  • KC9125 (5)
  • KC9140 (5)
  • KC9145 (5)
  • KC9215 (5)
  • KC9225 (5)
  • KC9240 (5)
  • KC9240NEW (5)
  • KC9245 (5)
  • KC9315 (5)
  • KC9320 (5)
  • KC9325 (5)
  • KC935 (5)
  • KC950 (5)
  • KC990 (5)
  • KCD25 (1)
  • KCK05 (5)
  • KCK05B (5)
  • KCK15 (5)
  • KCK15B (5)
  • KCK20 (5)
  • KCK20B (5)
  • KCM15 (5)
  • KCM15B (5)
  • KCM25 (5)
  • KCM25B (5)
  • KCM35 (5)
  • KCM35B (4)
  • KCP05 (5)
  • KCP05B (5)
  • KCP10 (5)
  • KCP10B (5)
  • KCP25 (5)
  • KCP25B (5)
  • KCP30 (5)
  • KCP30B (5)
  • KCP40 (5)
  • KCP40B (5)
  • KCPK05 (5)
  • KCS10 (4)
  • KCS10B (5)
  • KCU10 (5)
  • KCU25 (5)
  • KD050 (5)
  • KD081 (5)
  • KD100 (5)
  • KD120 (5)
  • KD1400 (5)
  • KD1405 (5)
  • KD1425 (5)
  • KM1 (4)
  • KMF (4)
  • KT1120 (4)
  • KT125 (5)
  • KT150 (5)
  • KT175 (5)
  • KT315 (5)
  • KT325 (4)
  • KTP10 (1)
  • KU10T (5)
  • KU30T (5)
  • KY1310 (5)
  • KY1320 (5)
  • KY1540 (5)
  • KY1615 (5)
  • KY2000 (5)
  • KY2100 (5)
  • KY3000 (5)
  • KY3400 (5)
  • KY3500 (5)
  • KY4000 (4)
  • KY4300 (5)
  • KY4400 (5)
  • KYK10 (5)
  • KYK25 (5)
  • KYK35 (5)
  • KYS25 (5)
  • KYS30 (5)
  • NL200 (4)
  • NL250 (5)
  • NL300 (4)
  • NL400 (4)
  • NL920 (5)
  • P25 (4)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (4)
  • SP0819 (4)
  • SP3019 (4)
  • SP4019 (4)
  • THM (4)
  • THM-X (4)
  • THMF-X (4)
  • TN10P (5)
  • TN10U (5)
  • TN15M (5)
  • TN15U (5)
  • TN2000 (4)
  • TN20K (5)
  • TN20P (5)
  • TN30M (5)
  • TN30P (5)
  • TN4000 (4)
  • TN5015 (4)
  • TN5020 (4)
  • TN5105 (5)
  • TN5120 (5)
  • TN6010 (5)
  • TN6025 (4)
  • TN7005 (5)
  • TN7010 (5)
  • TN7015 (5)
  • TN7025 (5)
  • TN7035 (4)
  • TN7105 (4)
  • TN7110 (4)
  • TN7115 (5)
  • TN7125 (4)
  • TN7135 (4)
  • TN8025 (5)
  • TTI15 (4)
  • TTR (4)
  • TTS (4)
  • TTX (4)
  • WBH10C (5)
  • WBH10P (5)
  • WBH10U (5)
  • WBH25P (5)
  • WBH25U (5)
  • WBH30P (5)
  • WBK40U (4)
  • WBK45U (5)
  • WDN00U (5)
  • WDN25U (5)
  • WK05CT (5)
  • WK15CT (4)
  • WK20CT (5)
  • WM15CT (5)
  • WM25CT (5)
  • WM35CT (5)
  • WP05CT (4)
  • WP15CT (5)
  • WP25CT (5)
  • WP35CT (5)
  • WS10PT (5)
  • WS25PT (5)
  • WU10HT (5)
  • X00511 (4)
Wiper Insert
  • N (5)
  • Y (5)
Minimum Axial Groove Diameter
  • 1.2598 (4)
  • 1.26 (1)
to
Minimum Axial Groove Diameter
  • 32.0 (5)
to
Maximum Bore Depth
  • 58.0 (1)
  • 60.0 (1)
  • 75.0 (3)
to
Maximum Bore Depth
  • 2.2835 (1)
  • 2.362 (1)
  • 2.9528 (3)
to
frontEnd
Clamp Style
  • M (5)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (1)
Maximum Cutting Depth
  • 4.5 (1)
to
Maximum Cutting Depth
  • 0.1772 (1)
to
insertGeometry
Cutting Tool Material
  • B H (5)
  • B L (5)
  • C A (5)
  • C N (5)
  • D P (5)
  • H T (5)
  • H W (5)
backEnd
Back-End Diameter
  • 1.258 (1)
  • 1.2598 (4)
to
Back-End Diameter
  • 32.0 (5)
to
other
Platform
  • KM32 (4)
Tool Unit
  • M (5)
Over All Length [L]
  • 70.0 (2)
  • 90.0 (3)
to
Over All Length [L]
  • 2.7559 (1)
  • 2.756 (1)
  • 3.5433 (3)
to
Insert Hand
  • N (5)
Cutting Condition Material
  • H-All (5)
  • K-All (5)
  • K1 (3)
  • M-All (5)
  • N-All (5)
  • P-All (5)
  • S-All (5)
  • S4 (5)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
    1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
      1023868 KM32TSS25GMCLNL12 KM32TSS25GMCLNL12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
        1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
          1023938 KM32TSS25GMDUNR15 KM32TSS25GMDUNR15 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 DN..150408/DN..432
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty
            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
            You are about to create a duplicate . Do you want to proceed?
            You are about to delete Do you want to proceed?
            What would you like to rename your to?
            Please enter a valid name
            Please enter a name for the duplicate
            Please enter a valid name
            You are about to add to your My Solutions page. Do you want to proceed?
            Please enter a valid name
            Send a copy of

            Please enter a valid Email
            Please enter a valid name

            We have found the following CAD Drawings

            Select the files you are looking for and download them all at once

            You should be logged to see your dashboard information
            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
            item(s) successfully added to the cart
            View Cart