successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (7)
    • N6
      Carbon, Graphite Composites, CFRP
      (7)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC
      (7)
    • H2
      Hardened Materials 48-55 HRC
      (7)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
  • Back Boring Back Boring (6)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (4)
  • Blind Hole Finishing Blind Hole Finishing (4)
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (6)
  • Facing Facing (6)
  • Grooving Grooving (6)
  • ID Facing ID Facing (4)
  • ID Grooving ID Grooving (6)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • OD Thread Turning OD Thread Turning (6)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (7)
  • Threading Threading (6)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (4)
  • Through Hole Finishing Through Hole Finishing (4)
  • Turning Turning (6)
Type of Thread
  • 60 (7)
  • ACME (4)
  • API (4)
  • API RD (4)
  • BSW (4)
  • BUTTRESS (7)
  • M (5)
  • NPT (4)
  • STUB ACME (4)
  • UN (7)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Tool Cutting Edge Angle
  • 90.0 (7)
to
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (7)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (2)
  • 0.051 (2)
  • 0.057 (2)
  • 0.066 (4)
  • 0.076 (7)
  • 0.08 (7)
  • 0.089 (5)
  • 0.09 (5)
  • 0.094 (4)
  • 0.097 (2)
  • 0.1 (7)
  • 0.102 (7)
  • 0.116 (2)
  • 0.117 (2)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.15 (4)
  • 0.155 (4)
  • 0.157 (4)
  • 0.165 (4)
  • 0.173 (4)
  • 0.178 (4)
  • 0.18 (1)
  • 0.185 (1)
  • 0.19 (7)
  • 0.191 (7)
  • 0.198 (4)
  • 0.2 (4)
  • 0.202 (5)
  • 0.224 (4)
  • 0.235 (4)
  • 0.244 (2)
  • 0.25 (4)
  • 0.251 (4)
  • 0.254 (4)
  • 0.255 (2)
  • 0.269 (4)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.315 (4)
  • 0.318 (4)
  • 0.33 (4)
  • 0.34 (4)
  • 0.343 (3)
  • 0.356 (4)
  • 0.404 (4)
  • 0.406 (4)
  • 0.43 (4)
  • 0.445 (4)
  • 0.472 (2)
  • 0.49 (4)
  • 0.5 (3)
  • 0.508 (4)
  • 0.57 (2)
  • 0.572 (4)
  • 0.575 (2)
  • 0.75 (3)
  • 0.787 (7)
  • 0.902 (4)
  • 1.0 (7)
  • 1.194 (7)
  • 1.195 (2)
  • 1.25 (7)
  • 1.5 (7)
  • 1.585 (4)
  • 1.588 (7)
  • 1.75 (7)
  • 1.98 (2)
  • 1.981 (4)
  • 2.0 (4)
  • 2.25 (4)
  • 2.388 (4)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (2)
  • 0.0026 (4)
  • 0.003 (7)
  • 0.0031 (7)
  • 0.0035 (5)
  • 0.0037 (4)
  • 0.0038 (2)
  • 0.004 (7)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (4)
  • 0.0059 (4)
  • 0.006 (4)
  • 0.0062 (4)
  • 0.0065 (4)
  • 0.0068 (4)
  • 0.007 (4)
  • 0.0075 (7)
  • 0.0078 (4)
  • 0.0079 (2)
  • 0.008 (5)
  • 0.0088 (4)
  • 0.0093 (4)
  • 0.0096 (2)
  • 0.0099 (4)
  • 0.01 (4)
  • 0.0106 (4)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.0124 (4)
  • 0.0125 (4)
  • 0.013 (4)
  • 0.0135 (5)
  • 0.014 (4)
  • 0.0159 (4)
  • 0.016 (4)
  • 0.017 (4)
  • 0.0175 (4)
  • 0.0186 (2)
  • 0.0193 (4)
  • 0.0197 (3)
  • 0.02 (4)
  • 0.0225 (4)
  • 0.0295 (3)
  • 0.031 (7)
  • 0.0355 (4)
  • 0.0394 (7)
  • 0.047 (7)
  • 0.0492 (7)
  • 0.0591 (7)
  • 0.0625 (7)
  • 0.0689 (7)
  • 0.078 (4)
  • 0.0787 (4)
  • 0.0886 (4)
  • 0.094 (4)
  • 0.106 (2)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (7)
  • K313 (7)
  • K420 (7)
  • K4H (6)
  • K68 (7)
  • KB1345 (4)
  • KB1630 (4)
  • KB5625 (4)
  • KC250 (7)
  • KC5010 (7)
  • KC5025 (7)
  • KC5410 (7)
  • KC710 (7)
  • KC720 (7)
  • KC722 (7)
  • KC730 (7)
  • KC732 (4)
  • KC810 (7)
  • KC850 (7)
  • KC910 (6)
  • KC9110 (7)
  • KC9120 (4)
  • KC9320 (7)
  • KC935 (7)
  • KC950 (7)
  • KCK20 (6)
  • KCK20B (7)
  • KCP10B (7)
  • KCP25B (7)
  • KCU10 (7)
  • KCU25 (7)
  • KD050 (2)
  • KD081 (4)
  • KD100 (4)
  • KD120 (4)
  • KD1425 (4)
  • KT175 (7)
  • KT315 (7)
  • KU10T (7)
  • KU25T (7)
  • KU30T (7)
  • KY3000 (4)
  • THM (7)
  • TN10P (6)
  • TN6010 (7)
  • TN6025 (7)
  • TN7110 (7)
  • WU10HT (2)
  • WU10PT (2)
  • WU25PT (2)
Wiper Insert
  • N (7)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.732 (3)
  • 1.874 (2)
  • 2.229 (2)
  • 3.5 (4)
  • 5.5 (2)
  • 6.874 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 44.0 (3)
  • 47.6 (2)
  • 56.625 (2)
  • 88.9 (4)
  • 139.7 (2)
  • 174.6 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (7)
to
Maximum Axial Groove Diameter
  • 393.661 (7)
to
Maximum Bore Depth
  • 35.0 (3)
to
Maximum Bore Depth
  • 1.378 (3)
to
frontEnd
Clamp Style
  • N (7)
Insert Shape
  • TN-TOP NOTCH (7)
Cutting Width
  • 0.5 (3)
  • 0.787 (3)
  • 0.8 (3)
  • 0.889 (3)
  • 0.991 (3)
  • 1.0 (7)
  • 1.041 (3)
  • 1.19 (5)
  • 1.194 (7)
  • 1.199 (1)
  • 1.2 (7)
  • 1.39 (3)
  • 1.397 (3)
  • 1.4 (3)
  • 1.473 (3)
  • 1.5 (7)
  • 1.56 (1)
  • 1.57 (6)
  • 1.575 (7)
  • 1.69 (3)
  • 1.7 (3)
  • 1.702 (3)
  • 1.75 (7)
  • 1.829 (4)
  • 1.94 (3)
  • 1.95 (3)
  • 1.956 (3)
  • 1.981 (4)
  • 2.0 (7)
  • 2.007 (3)
  • 2.2 (7)
  • 2.235 (7)
  • 2.24 (5)
  • 2.25 (5)
  • 2.388 (7)
  • 2.39 (2)
  • 2.464 (4)
  • 2.5 (7)
  • 2.667 (4)
  • 2.74 (3)
  • 2.743 (7)
  • 2.75 (7)
  • 2.794 (4)
  • 2.997 (7)
  • 3.0 (7)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (7)
  • 3.18 (2)
  • 3.2 (7)
  • 3.245 (3)
  • 3.25 (4)
  • 3.251 (7)
  • 3.27 (3)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (7)
  • 3.607 (4)
  • 3.73 (1)
  • 3.81 (3)
  • 3.84 (3)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (2)
  • 3.988 (4)
  • 4.0 (4)
  • 4.24 (2)
  • 4.242 (4)
  • 4.25 (2)
  • 4.3 (4)
  • 4.5 (4)
  • 4.521 (4)
  • 4.699 (4)
  • 4.775 (4)
  • 4.8 (4)
  • 4.801 (4)
  • 4.81 (4)
  • 4.88 (2)
  • 4.95 (4)
to
Cutting Width
  • 0.0197 (3)
  • 0.031 (3)
  • 0.0315 (3)
  • 0.035 (3)
  • 0.039 (3)
  • 0.0394 (7)
  • 0.041 (3)
  • 0.047 (7)
  • 0.0472 (7)
  • 0.055 (3)
  • 0.0551 (3)
  • 0.058 (3)
  • 0.0591 (7)
  • 0.062 (7)
  • 0.0669 (3)
  • 0.067 (3)
  • 0.0689 (7)
  • 0.072 (4)
  • 0.076 (3)
  • 0.0768 (3)
  • 0.077 (3)
  • 0.078 (4)
  • 0.0787 (7)
  • 0.079 (5)
  • 0.0866 (7)
  • 0.088 (7)
  • 0.0886 (5)
  • 0.094 (7)
  • 0.097 (4)
  • 0.0984 (7)
  • 0.105 (4)
  • 0.108 (7)
  • 0.1083 (7)
  • 0.11 (4)
  • 0.118 (7)
  • 0.1181 (7)
  • 0.122 (4)
  • 0.125 (7)
  • 0.126 (7)
  • 0.1278 (3)
  • 0.128 (7)
  • 0.129 (3)
  • 0.131 (2)
  • 0.1378 (7)
  • 0.142 (4)
  • 0.147 (1)
  • 0.15 (3)
  • 0.151 (3)
  • 0.156 (4)
  • 0.157 (4)
  • 0.1574 (4)
  • 0.1575 (4)
  • 0.167 (4)
  • 0.1673 (2)
  • 0.169 (4)
  • 0.1771 (4)
  • 0.1772 (4)
  • 0.178 (4)
  • 0.185 (4)
  • 0.188 (4)
  • 0.189 (4)
  • 0.192 (2)
  • 0.195 (4)
to
Maximum Cutting Depth
  • 3.51 (1)
  • 5.33 (1)
to
Maximum Cutting Depth
  • 0.138 (1)
  • 0.21 (1)
to
Insert Size
  • 2 (3)
  • 3 (4)
insertGeometry
Cutting Tool Material
  • B H (4)
  • B L (4)
  • C N (4)
  • D P (4)
  • H T (7)
  • H W (7)
backEnd
Back-End Diameter
  • 1.2598 (5)
  • 1.26 (2)
to
Back-End Diameter
  • 32.0 (7)
to
other
Platform
  • KM32 (7)
Tool Unit
  • I (7)
  • M (3)
Over All Length [L]
  • 35.0 (5)
  • 40.0 (2)
to
Over All Length [L]
  • 1.378 (5)
  • 1.5748 (2)
to
Insert Hand
  • L (4)
  • R (3)
Cutting Condition Material
  • H-All (7)
  • K-All (7)
  • M-All (7)
  • N-All (7)
  • P-All (7)
  • S-All (7)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
1019412 KM32TSNEL3 KM32TSNEL3 35.0000 1.378 22.0000 .8661 44.0000 1.732 NG3R    
    1019406 KM32TSNER2 KM32TSNER2 35.0000 1.378 22.0000 .8660 44.0000 1.732 NG2L 0.17 0.37
      1019410 KM32TSNER3 KM32TSNER3 35.0000 1.378 22.0000 .8660 44.0000 1.732 NG3L 0.17 0.38
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty
        • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
        • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
        1019409 KM32TSNSL2 KM32TSNSL2 35.0000 1.378 22.0000 .8661 NG2L
          1019413 KM32TSNSL3 KM32TSNSL3 40.0000 1.574 22.0000 .8661 NG3L
            1019407 KM32TSNSR2 KM32TSNSR2 35.0000 1.378 22.0000 .8661 NG2R
              1019411 KM32TSNSR3 KM32TSNSR3 40.0000 1.574 22.0000 .8660 NG3R
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                You are about to create a duplicate . Do you want to proceed?
                You are about to delete Do you want to proceed?
                What would you like to rename your to?
                Please enter a valid name
                Please enter a name for the duplicate
                Please enter a valid name
                You are about to add to your My Solutions page. Do you want to proceed?
                Please enter a valid name
                Send a copy of

                Please enter a valid Email
                Please enter a valid name

                We have found the following CAD Drawings

                Select the files you are looking for and download them all at once

                You should be logged to see your dashboard information
                The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                item(s) successfully added to the cart
                View Cart