Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (22)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (22)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (22)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (22)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (15)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (22)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (22)
    • H3
      Hardened Materials 56-60 HRC
      (22)
    • H4
      Hardened Materials >60 HRC
      (22)
Applications
  • Chamfer Turning Chamfer Turning (16)
  • Facing Facing (21)
  • Multiple Direction Cutting Multiple Direction Cutting (22)
  • Plunge Turning Plunge Turning (16)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (4)
  • Turning Turning (22)
Cutting Condition
  • Heavily Interrupted Cut (22)
  • Interrupted (16)
  • Lightly Interrupted Cut (22)
  • Smooth Cut (22)
  • Varying Depth of Cut (22)
Tool Cutting Edge Angle
  • 45.0 (1)
  • 62.5 (2)
  • 90.0 (1)
  • 93.0 (10)
  • 95.0 (4)
  • 107.5 (4)
to
Cutting Edges Per Insert
  • 1.0 (21)
  • 2.0 (17)
  • 3.0 (4)
  • 4.0 (18)
  • 6.0 (4)
  • 8.0 (9)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (13)
  • 0.102 (11)
  • 0.2 (15)
  • 0.203 (13)
  • 0.34 (6)
  • 0.397 (22)
  • 0.4 (22)
  • 0.406 (11)
  • 0.41 (5)
  • 0.6 (2)
  • 0.79 (1)
  • 0.792 (8)
  • 0.794 (22)
  • 0.8 (22)
  • 0.81 (5)
  • 1.19 (2)
  • 1.191 (22)
  • 1.2 (22)
  • 1.587 (2)
  • 1.588 (8)
  • 1.6 (16)
  • 2.381 (3)
  • 2.4 (3)
to
Corner Radius
  • 0.004 (19)
  • 0.008 (15)
  • 0.0083 (2)
  • 0.013 (6)
  • 0.0156 (22)
  • 0.016 (22)
  • 0.031 (22)
  • 0.0312 (22)
  • 0.0313 (22)
  • 0.0315 (2)
  • 0.032 (5)
  • 0.0469 (22)
  • 0.047 (16)
  • 0.0472 (2)
  • 0.0516 (1)
  • 0.0625 (16)
  • 0.063 (13)
  • 0.0938 (6)
  • 0.1563 (2)
  • 0.312 (6)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (20)
  • 241 (2)
  • CL4 (11)
  • CM2 (20)
  • CM3 (11)
  • CM4 (5)
  • CPX (14)
  • CW2 (10)
  • CW2015 (20)
  • CW5025 (22)
  • GX (3)
  • HK1500 (13)
  • HT2 (8)
  • HTX (4)
  • K060 (8)
  • K090 (20)
  • K1 (2)
  • K10M (22)
  • K10P (22)
  • K10U (16)
  • K15U (22)
  • K20K (22)
  • K21 (5)
  • K25M (22)
  • K25P (22)
  • K313 (22)
  • K35P (8)
  • K420 (14)
  • K45 (14)
  • K68 (20)
  • KB1340 (3)
  • KB1345 (7)
  • KB1610 (16)
  • KB1625 (14)
  • KB1630 (13)
  • KB5610 (13)
  • KB5625 (14)
  • KB5630 (11)
  • KB9610 (22)
  • KB9640 (5)
  • KBH10 (22)
  • KBH10B (19)
  • KBH20 (22)
  • KBH20B (19)
  • KBK35 (2)
  • KC210 (12)
  • KC250 (6)
  • KC5010 (22)
  • KC5025 (22)
  • KC5410 (22)
  • KC5510 (22)
  • KC5525 (13)
  • KC710 (2)
  • KC720 (16)
  • KC722 (2)
  • KC730 (16)
  • KC7310 (22)
  • KC732 (16)
  • KC8050 (22)
  • KC810 (22)
  • KC850 (22)
  • KC9010 (22)
  • KC9025 (22)
  • KC910 (22)
  • KC9105 (22)
  • KC9110 (22)
  • KC9120 (22)
  • KC9125 (22)
  • KC9125RR (1)
  • KC9140 (22)
  • KC9145 (14)
  • KC9210 (6)
  • KC9215 (22)
  • KC9225 (22)
  • KC9240 (22)
  • KC9240NEW (22)
  • KC9245 (22)
  • KC9315 (22)
  • KC9320 (22)
  • KC9325 (22)
  • KC935 (22)
  • KC950 (22)
  • KC990 (22)
  • KCD25 (3)
  • KCK05 (22)
  • KCK05B (22)
  • KCK15 (22)
  • KCK15B (22)
  • KCK20 (22)
  • KCK20B (22)
  • KCM15 (22)
  • KCM15B (22)
  • KCM25 (22)
  • KCM25B (22)
  • KCM35 (22)
  • KCM35B (13)
  • KCP05 (22)
  • KCP05B (22)
  • KCP10 (22)
  • KCP10B (22)
  • KCP25 (22)
  • KCP25B (22)
  • KCP30 (22)
  • KCP30B (16)
  • KCP40 (16)
  • KCP40B (16)
  • KCPK05 (20)
  • KCS10 (2)
  • KCS10B (20)
  • KCU10 (22)
  • KCU25 (22)
  • KD050 (14)
  • KD081 (14)
  • KD100 (11)
  • KD120 (14)
  • KD1400 (15)
  • KD1405 (11)
  • KD1425 (15)
  • KM1 (5)
  • KMF (2)
  • KT1120 (8)
  • KT125 (20)
  • KT150 (14)
  • KT175 (20)
  • KT315 (22)
  • KT325 (10)
  • KT5020 (2)
  • KTP10 (3)
  • KU10T (22)
  • KU30T (22)
  • KY1310 (10)
  • KY1320 (22)
  • KY1540 (6)
  • KY1615 (20)
  • KY2000 (8)
  • KY2100 (6)
  • KY3000 (20)
  • KY3400 (10)
  • KY3500 (22)
  • KY4000 (9)
  • KY4300 (5)
  • KY4400 (22)
  • KYK10 (10)
  • KYK25 (10)
  • KYK35 (22)
  • KYS25 (6)
  • KYS30 (8)
  • NL200 (8)
  • NL250 (22)
  • NL300 (11)
  • NL400 (4)
  • NL920 (16)
  • P25 (3)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (8)
  • SP0819 (12)
  • SP0A00 (1)
  • SP3019 (7)
  • SP4019 (3)
  • SP4036 (6)
  • SP4093 (6)
  • SP61EJ (1)
  • THM (11)
  • THM-X (3)
  • THMF-X (5)
  • TN10P (22)
  • TN10U (22)
  • TN15M (22)
  • TN15U (22)
  • TN2000 (13)
  • TN20K (22)
  • TN20P (22)
  • TN30M (22)
  • TN30P (16)
  • TN4000 (13)
  • TN5015 (13)
  • TN5020 (13)
  • TN5105 (16)
  • TN5120 (16)
  • TN6010 (17)
  • TN6025 (12)
  • TN7005 (13)
  • TN7010 (16)
  • TN7015 (16)
  • TN7025 (16)
  • TN7035 (13)
  • TN7105 (12)
  • TN7110 (13)
  • TN7115 (16)
  • TN7125 (13)
  • TN7135 (13)
  • TN8025 (16)
  • TTI15 (8)
  • TTM09 (3)
  • TTR (3)
  • TTS (11)
  • TTX (10)
  • WBH10C (17)
  • WBH10P (11)
  • WBH10U (14)
  • WBH25P (13)
  • WBH25U (14)
  • WBH30P (11)
  • WBK40U (3)
  • WBK45U (13)
  • WDN00U (5)
  • WDN25U (15)
  • WK05CT (22)
  • WK15CT (13)
  • WK20CT (22)
  • WM15CT (22)
  • WM25CT (22)
  • WM35CT (22)
  • WP05CT (4)
  • WP15CT (22)
  • WP25CT (22)
  • WP35CT (22)
  • WS10PT (22)
  • WS25PT (22)
  • WU10HT (22)
  • X00511 (2)
Wiper Insert
  • N (22)
  • Y (10)
Minimum Axial Groove Diameter
  • 1.732 (2)
  • 2.126 (2)
to
Minimum Axial Groove Diameter
  • 44.0 (2)
  • 54.0 (2)
to
Maximum Bore Depth
  • 35.0 (4)
to
Maximum Bore Depth
  • 1.378 (4)
to
frontEnd
Clamp Style
  • M (22)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (9)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (2)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (22)
  • B L (22)
  • C A (22)
  • C N (22)
  • D P (21)
  • H T (22)
  • H W (22)
backEnd
Back-End Diameter
  • 1.2598 (22)
to
Back-End Diameter
  • 32.0 (22)
to
other
Platform
  • KM32 (22)
Tool Unit
  • M (22)
Over All Length [L]
  • 35.0 (17)
  • 40.0 (5)
to
Over All Length [L]
  • 1.378 (17)
  • 1.5748 (4)
  • 1.575 (1)
to
Insert Hand
  • N (22)
Cutting Condition Material
  • H-All (22)
  • K-All (22)
  • K1 (3)
  • M-All (22)
  • N-All (22)
  • P-All (22)
  • S-All (22)
  • S4 (11)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KM32TS™-Schneidköpfe

(2 Products)
  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
1023228 KM32TSMCLNL12 KM32TSMCLNL12 35.0000 1.378 22.0000 .8660 CN..120408/CN..432 0.18 0.39
    1023224 KM32TSMCLNR12 KM32TSMCLNR12 35.0000 1.378 22.0000 .8660 CN..120408/CN..432 0.18 0.39
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      KM32TS™-Schneidköpfe

      (4 Products)
      • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      3095643 KM32TSMDJNL1504 KM32TSMDJNL1504 35.0000 1.378 22.0000 .8661 DN..150408/DN..432 0.15 0.32
        1023275 KM32TSMDJNL1506 KM32TSMDJNL1506 35.0000 1.378 22.0000 .8661 DN..150608/DN..442 0.14 0.32
          3095644 KM32TSMDJNR1504 KM32TSMDJNR1504 35.0000 1.378 22.0000 .8660 DN..150408/DN..432 0.15 0.32
            1023232 KM32TSMDJNR1506 KM32TSMDJNR1506 35.0000 1.378 22.0000 .8660 DN..150608/DN..442 0.14 0.32
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              KM32TS™-Schneidköpfe

              (2 Products)
              • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              3095645 KM32TSMDPNN1504 KM32TSMDPNN1504 40.0000 1.574 0.0000 .0000 DN..150408/DN..432 0.16 0.34
                1022560 KM32TSMDPNN1506 KM32TSMDPNN1506 40.0000 1.574 0.0000 .0000 DN..150608/DN..442 0.15 0.34
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  KM32TS™-Schneidköpfe

                  (2 Products)
                  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  1023276 KM32TSMDQNL1506 KM32TSMDQNL1506 35.0000 1.378 22.0000 .8661 DN..150608/DN..442 0.16 0.35
                    1023233 KM32TSMDQNR1506 KM32TSMDQNR1506 35.0000 1.378 22.0000 .8661 DN..150608/DN..442 0.16 0.35
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      KM32TS™-Schneidköpfe

                      (1 Products)
                      • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                      • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      1023277 KM32TSMDUNL1506 KM32TSMDUNL1506 35.0000 1.378 22.0000 .8660 DN..150608/DN..442 0.18 0.40
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        KM32TS™-Schneidköpfe

                        (1 Products)
                        • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                        • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                        1144875 KM32TSMSDNN12 KM32TSMSDNN12 40.0000 1.575 0.0000 .0000 SN..120408/SN..432 0.16 0.36
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          KM32TS™-Schneidköpfe

                          (1 Products)
                          • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
                          1023281 KM32TSMTFNL16 KM32TSMTFNL16 35.0000 1.378 22.0000 .8661 44.0000 1.732 TN..160408/TN..332
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            KM32TS™-Schneidköpfe

                            (1 Products)
                            • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                            • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                            • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
                            1144903 KM32TSMTUNR16 KM32TSMTUNR16 35.0000 1.378 22.0000 .8661 44.0000 1.732 TN..160408/TN..332
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              KM32TS™-Schneidköpfe

                              (2 Products)
                              • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                              • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
                              1144910 KM32TSMVHNL16 KM32TSMVHNL16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
                                1144909 KM32TSMVHNR16 KM32TSMVHNR16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  KM32TS™-Schneidköpfe

                                  (2 Products)
                                  • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                  • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
                                  1023283 KM32TSMVJNL16 KM32TSMVJNL16 40.0000 1.574 22.0000 .8661 VN..160408/VN..332
                                    1023280 KM32TSMVJNR16 KM32TSMVJNR16 40.0000 1.574 22.0000 .8661 VN..160408/VN..332
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      KM32TS™-Schneidköpfe

                                      (2 Products)
                                      • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                      • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
                                      1144912 KM32TSMVUNL16 KM32TSMVUNL16 35.0000 1.378 27.0000 1.063 54.0000 2.126 VN..160408/VN..332
                                        1144911 KM32TSMVUNR16 KM32TSMVUNR16 35.0000 1.378 27.0000 1.063 54.0000 2.126 VN..160408/VN..332
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          KM32TS™-Schneidköpfe

                                          (2 Products)
                                          • Schaft – KM-TS ISO 26622Schaft – KM-TS ISO 26622
                                          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                          • Kühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                          1144915 KM32TSMWLNL08 KM32TSMWLNL08 35.0000 1.378 22.0000 .8660 WN..080408/WN..432 0.18 0.40
                                            1144914 KM32TSMWLNR08 KM32TSMWLNR08 35.0000 1.378 22.0000 .8660 WN..080408/WN..432 0.18 0.40
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor

                                              SUPPORT

                                              Hilfe zu Produkten
                                              E-Mail-Adresse | 0800 1015774

                                               

                                              Hilfe bei Bestellungen

                                              E-Mail-Adresse | 800.979.4342


                                              Chat mit einem Experten  Available 8am-6pm EST

                                              WIDIA WERBEARTIKEL

                                              Karriere

                                              Durchsuchen Sie unsere Stellenangebote

                                              SOZIALE MEDIEN

                                              BLEIBEN WIR IM KONTAKT

                                              Bleiben wir im Kontakt

                                              © 2019 WIDIA Product Group 2018, Privacy Policy

                                              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                              You are about to create a duplicate . Do you want to proceed?
                                              You are about to delete Do you want to proceed?
                                              What would you like to rename your to?
                                              Please enter a valid name
                                              Please enter a name for the duplicate
                                              Please enter a valid name
                                              You are about to add to your My Solutions page. Do you want to proceed?
                                              Please enter a valid name
                                              Send a copy of

                                              Please enter a valid Email
                                              Please enter a valid name

                                              We have found the following CAD Drawings

                                              Select the files you are looking for and download them all at once

                                              Can’t find the file type you’re looking for?
                                              Request Drawings »

                                              You should be logged to see your dashboard information
                                              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                              item(s) successfully added to the cart
                                              View Cart