Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (56)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (56)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (56)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (56)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (56)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (56)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (56)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (56)
  • M Stainless Steel (56)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (56)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (56)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (56)
  • K Cast Iron (56)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (56)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (56)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (56)
  • N Non-Ferrous Materials (54)
    • N1
      Wrought Aluminum
      (54)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (54)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (38)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (54)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (54)
    • N6
      Carbon, Graphite Composites, CFRP
      (45)
    • N7
      MMC's
      (54)
  • S High-Temp Alloys (56)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (56)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (56)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (56)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (56)
  • H Hardened Materials (45)
    • H1
      Hardened Materials 44-48 HRC
      (45)
    • H2
      Hardened Materials 48-55 HRC
      (41)
    • H3
      Hardened Materials 56-60 HRC
      (38)
    • H4
      Hardened Materials >60 HRC
      (38)
Applications
  • Back Boring Back Boring (12)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (8)
  • Blind Hole Finishing Blind Hole Finishing (8)
  • Chamfer Turning Chamfer Turning (29)
  • Cut-Off Cut-Off (10)
  • Deep Grooving Deep Grooving (10)
  • Face Grooving Face Grooving (10)
  • Facing Facing (50)
  • Grooving Grooving (6)
  • ID Facing ID Facing (4)
  • ID Grooving ID Grooving (10)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (56)
  • OD Thread Turning OD Thread Turning (10)
  • Plunge Turning Plunge Turning (29)
  • Profiling Profiling (39)
  • TRN Boring TRN Boring (33)
  • Threading Threading (10)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (8)
  • Through Hole Finishing Through Hole Finishing (8)
  • Turning Turning (53)
Type of Thread
  • 55 (4)
  • 60 (11)
  • ACME (8)
  • API (4)
  • API RD (8)
  • BSPT (4)
  • BSW (8)
  • BUTTRESS (7)
  • M (9)
  • NPT (8)
  • NPTF (4)
  • RD DIN 405 (4)
  • STUB ACME (8)
  • TR DIN 103 (4)
  • UN (11)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (52)
  • Interrupted (24)
  • Lightly Interrupted Cut (52)
  • Smooth Cut (52)
  • Varying Depth of Cut (52)
Tool Cutting Edge Angle
  • 45.0 (1)
  • 62.5 (3)
  • 90.0 (12)
  • 93.0 (18)
  • 95.0 (15)
  • 107.5 (7)
to
Cutting Edges Per Insert
  • 1.0 (39)
  • 2.0 (41)
  • 3.0 (8)
  • 4.0 (30)
  • 6.0 (8)
  • 8.0 (13)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (2)
  • 0.03 (8)
  • 0.038 (10)
  • 0.051 (6)
  • 0.057 (2)
  • 0.066 (4)
  • 0.07 (1)
  • 0.076 (11)
  • 0.08 (9)
  • 0.081 (1)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (2)
  • 0.089 (5)
  • 0.09 (5)
  • 0.091 (2)
  • 0.094 (4)
  • 0.097 (3)
  • 0.1 (43)
  • 0.102 (21)
  • 0.108 (1)
  • 0.116 (2)
  • 0.117 (2)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.135 (2)
  • 0.15 (4)
  • 0.152 (1)
  • 0.155 (4)
  • 0.157 (4)
  • 0.159 (2)
  • 0.16 (1)
  • 0.165 (4)
  • 0.173 (4)
  • 0.178 (6)
  • 0.18 (1)
  • 0.185 (1)
  • 0.19 (7)
  • 0.191 (7)
  • 0.198 (4)
  • 0.2 (40)
  • 0.202 (5)
  • 0.203 (27)
  • 0.21 (1)
  • 0.223 (2)
  • 0.224 (4)
  • 0.235 (4)
  • 0.24 (2)
  • 0.244 (2)
  • 0.25 (4)
  • 0.251 (4)
  • 0.254 (4)
  • 0.255 (2)
  • 0.269 (6)
  • 0.279 (3)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.31 (1)
  • 0.315 (4)
  • 0.318 (6)
  • 0.33 (4)
  • 0.34 (10)
  • 0.343 (3)
  • 0.356 (4)
  • 0.381 (2)
  • 0.397 (38)
  • 0.4 (45)
  • 0.404 (4)
  • 0.406 (15)
  • 0.41 (5)
  • 0.43 (4)
  • 0.445 (4)
  • 0.472 (2)
  • 0.49 (4)
  • 0.5 (3)
  • 0.508 (4)
  • 0.57 (2)
  • 0.572 (4)
  • 0.575 (2)
  • 0.6 (2)
  • 0.7 (1)
  • 0.75 (3)
  • 0.76 (2)
  • 0.787 (7)
  • 0.79 (1)
  • 0.791 (2)
  • 0.792 (10)
  • 0.794 (43)
  • 0.8 (45)
  • 0.81 (5)
  • 0.902 (4)
  • 0.936 (1)
  • 1.0 (7)
  • 1.19 (4)
  • 1.191 (36)
  • 1.194 (7)
  • 1.195 (2)
  • 1.2 (45)
  • 1.25 (7)
  • 1.5 (7)
  • 1.585 (4)
  • 1.587 (4)
  • 1.588 (17)
  • 1.6 (20)
  • 1.75 (7)
  • 1.98 (2)
  • 1.981 (4)
  • 2.0 (4)
  • 2.25 (4)
  • 2.381 (3)
  • 2.388 (4)
  • 2.4 (3)
to
Corner Radius
  • 0.001 (7)
  • 0.0012 (1)
  • 0.0015 (10)
  • 0.002 (6)
  • 0.0023 (2)
  • 0.0026 (4)
  • 0.0028 (3)
  • 0.003 (11)
  • 0.0031 (9)
  • 0.0032 (3)
  • 0.0033 (2)
  • 0.0034 (2)
  • 0.0035 (5)
  • 0.0037 (4)
  • 0.0038 (3)
  • 0.0039 (2)
  • 0.004 (48)
  • 0.0043 (1)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (6)
  • 0.0059 (4)
  • 0.006 (5)
  • 0.0062 (4)
  • 0.0063 (3)
  • 0.0065 (4)
  • 0.0068 (4)
  • 0.007 (6)
  • 0.0075 (7)
  • 0.0078 (11)
  • 0.0079 (9)
  • 0.008 (44)
  • 0.0083 (5)
  • 0.0088 (6)
  • 0.0093 (4)
  • 0.0094 (2)
  • 0.0096 (2)
  • 0.0099 (4)
  • 0.01 (4)
  • 0.0106 (6)
  • 0.011 (3)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.0122 (1)
  • 0.0124 (4)
  • 0.0125 (6)
  • 0.013 (10)
  • 0.0135 (5)
  • 0.014 (4)
  • 0.015 (2)
  • 0.0156 (45)
  • 0.0158 (1)
  • 0.0159 (4)
  • 0.016 (33)
  • 0.017 (4)
  • 0.0175 (4)
  • 0.0186 (2)
  • 0.0193 (4)
  • 0.0197 (3)
  • 0.02 (4)
  • 0.0225 (4)
  • 0.0276 (1)
  • 0.0295 (3)
  • 0.0298 (2)
  • 0.031 (36)
  • 0.0311 (2)
  • 0.0312 (43)
  • 0.0313 (45)
  • 0.0315 (14)
  • 0.032 (5)
  • 0.0355 (4)
  • 0.0369 (1)
  • 0.0394 (7)
  • 0.0469 (45)
  • 0.047 (26)
  • 0.0472 (11)
  • 0.0492 (7)
  • 0.0516 (1)
  • 0.0591 (7)
  • 0.0625 (27)
  • 0.063 (15)
  • 0.0689 (7)
  • 0.078 (4)
  • 0.0787 (4)
  • 0.0886 (4)
  • 0.0938 (6)
  • 0.094 (4)
  • 0.106 (2)
  • 0.1563 (4)
  • 0.312 (6)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (22)
  • 241 (4)
  • CL4 (13)
  • CM2 (22)
  • CM3 (13)
  • CM4 (7)
  • CPX (16)
  • CW2 (12)
  • CW2015 (22)
  • CW5025 (24)
  • GH1 (7)
  • GX (5)
  • HCK10 (10)
  • HCK20 (1)
  • HK1500 (28)
  • HK35 (8)
  • HT2 (25)
  • HTX (16)
  • HWK15 (10)
  • K060 (10)
  • K090 (22)
  • K1 (4)
  • K1010P (7)
  • K10M (36)
  • K10P (31)
  • K10U (27)
  • K15 (1)
  • K15U (33)
  • K20K (36)
  • K21 (7)
  • K25M (35)
  • K25P (26)
  • K2885 (7)
  • K313 (50)
  • K35P (8)
  • K420 (30)
  • K45 (16)
  • K4H (6)
  • K68 (42)
  • KB1340 (10)
  • KB1345 (23)
  • KB1610 (27)
  • KB1625 (23)
  • KB1630 (22)
  • KB5610 (24)
  • KB5625 (29)
  • KB5630 (22)
  • KB9610 (33)
  • KB9640 (12)
  • KBH10 (33)
  • KBH10B (21)
  • KBH20 (34)
  • KBH20B (21)
  • KBK35 (4)
  • KC210 (14)
  • KC250 (15)
  • KC5010 (56)
  • KC5020P (7)
  • KC5025 (54)
  • KC5410 (41)
  • KC5510 (33)
  • KC5525 (24)
  • KC710 (14)
  • KC720 (39)
  • KC722 (14)
  • KC730 (50)
  • KC7310 (35)
  • KC732 (32)
  • KC8050 (45)
  • KC810 (46)
  • KC850 (48)
  • KC9010 (44)
  • KC9025 (45)
  • KC910 (40)
  • KC9105 (43)
  • KC9110 (52)
  • KC9120 (44)
  • KC9125 (45)
  • KC9125RR (1)
  • KC9140 (35)
  • KC9145 (16)
  • KC9210 (6)
  • KC9215 (35)
  • KC9225 (45)
  • KC9240 (45)
  • KC9240NEW (45)
  • KC9245 (35)
  • KC9315 (45)
  • KC9320 (50)
  • KC9325 (43)
  • KC935 (52)
  • KC950 (40)
  • KC990 (44)
  • KCD25 (13)
  • KCK05 (45)
  • KCK05B (38)
  • KCK15 (43)
  • KCK15B (45)
  • KCK20 (49)
  • KCK20B (50)
  • KCM15 (45)
  • KCM15B (45)
  • KCM25 (45)
  • KCM25B (43)
  • KCM35 (38)
  • KCM35B (28)
  • KCP05 (43)
  • KCP05B (35)
  • KCP10 (45)
  • KCP10B (52)
  • KCP25 (45)
  • KCP25B (52)
  • KCP30 (45)
  • KCP30B (25)
  • KCP40 (18)
  • KCP40B (24)
  • KCPK05 (27)
  • KCS10 (14)
  • KCS10B (37)
  • KCU10 (52)
  • KCU25 (50)
  • KD050 (20)
  • KD081 (22)
  • KD100 (17)
  • KD120 (20)
  • KD1400 (26)
  • KD1405 (13)
  • KD1425 (30)
  • KM1 (7)
  • KMF (4)
  • KT1120 (10)
  • KT125 (29)
  • KT150 (16)
  • KT175 (38)
  • KT315 (52)
  • KT325 (27)
  • KT5020 (2)
  • KTP10 (12)
  • KU10 (9)
  • KU10T (50)
  • KU25T (10)
  • KU30T (50)
  • KY1310 (12)
  • KY1320 (24)
  • KY1540 (8)
  • KY1615 (22)
  • KY2000 (10)
  • KY2100 (8)
  • KY3000 (26)
  • KY3400 (12)
  • KY3500 (24)
  • KY4000 (11)
  • KY4300 (7)
  • KY4400 (24)
  • KYK10 (12)
  • KYK25 (12)
  • KYK35 (24)
  • KYS25 (8)
  • KYS30 (10)
  • NL200 (10)
  • NL250 (29)
  • NL300 (14)
  • NL400 (6)
  • NL920 (19)
  • P25 (6)
  • PB100 (11)
  • PB170 (5)
  • PB250 (12)
  • PB300 (4)
  • PD100 (10)
  • PD50 (8)
  • PN120 (2)
  • PS5 (15)
  • SP0819 (14)
  • SP0A00 (1)
  • SP0PW3 (1)
  • SP3019 (9)
  • SP4019 (10)
  • SP4036 (6)
  • SP4093 (6)
  • SP61EJ (1)
  • SPN3W1 (2)
  • THM (30)
  • THM-X (15)
  • THMF-X (7)
  • TN10P (51)
  • TN10U (34)
  • TN15M (40)
  • TN15U (33)
  • TN2000 (29)
  • TN20K (38)
  • TN20P (45)
  • TN30M (45)
  • TN30P (18)
  • TN4000 (21)
  • TN5015 (30)
  • TN5020 (30)
  • TN5105 (33)
  • TN5120 (33)
  • TN6010 (36)
  • TN6025 (34)
  • TN7005 (31)
  • TN7010 (35)
  • TN7015 (35)
  • TN7025 (35)
  • TN7035 (25)
  • TN7105 (33)
  • TN7110 (37)
  • TN7115 (33)
  • TN7125 (30)
  • TN7135 (25)
  • TN8025 (37)
  • TTI15 (24)
  • TTM (2)
  • TTM09 (3)
  • TTR (15)
  • TTS (17)
  • TTX (21)
  • W00342 (8)
  • WBH10C (28)
  • WBH10P (22)
  • WBH10U (25)
  • WBH25P (24)
  • WBH25U (23)
  • WBH30P (22)
  • WBK40U (10)
  • WBK45U (25)
  • WDN00U (9)
  • WDN25U (26)
  • WK05CT (43)
  • WK15CT (29)
  • WK20CT (43)
  • WM15CT (43)
  • WM25CT (43)
  • WM35CT (33)
  • WP05CT (6)
  • WP15CT (43)
  • WP20TT (12)
  • WP25CT (43)
  • WP35CT (43)
  • WS10PT (43)
  • WS25PT (42)
  • WU10HT (35)
  • WU10PT (2)
  • WU25PT (2)
  • X00511 (4)
Wiper Insert
  • N (56)
  • Y (27)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.2598 (4)
  • 1.575 (4)
  • 1.626 (2)
  • 1.732 (15)
  • 1.7323 (1)
  • 1.874 (2)
  • 2.126 (2)
  • 2.229 (2)
  • 2.913 (2)
  • 3.5 (4)
  • 5.5 (2)
  • 6.874 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 32.0 (4)
  • 40.0 (4)
  • 41.3 (2)
  • 44.0 (16)
  • 47.6 (2)
  • 54.0 (2)
  • 56.625 (2)
  • 74.0 (2)
  • 88.9 (4)
  • 139.7 (2)
  • 174.6 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (7)
to
Maximum Axial Groove Diameter
  • 393.661 (7)
to
Maximum Bore Depth
  • 35.0 (24)
  • 79.55 (1)
  • 80.0 (3)
to
Maximum Bore Depth
  • 1.378 (24)
  • 3.132 (1)
  • 3.1496 (3)
to
frontEnd
Clamp Style
  • M (26)
  • N (7)
  • P (13)
  • S (10)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (9)
  • D-DIAMOND/RHOMBIC 55 (21)
  • LT-TRIANGLE LAY DOWN THREAD 60 (4)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (2)
  • TN-TOP NOTCH (7)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (6)
Cutting Width
  • 0.5 (3)
  • 0.787 (3)
  • 0.8 (3)
  • 0.889 (3)
  • 0.991 (3)
  • 1.0 (7)
  • 1.041 (3)
  • 1.19 (5)
  • 1.194 (7)
  • 1.199 (1)
  • 1.2 (7)
  • 1.39 (3)
  • 1.397 (3)
  • 1.4 (3)
  • 1.473 (3)
  • 1.5 (7)
  • 1.56 (1)
  • 1.57 (6)
  • 1.575 (7)
  • 1.69 (3)
  • 1.7 (3)
  • 1.702 (3)
  • 1.75 (7)
  • 1.829 (4)
  • 1.94 (3)
  • 1.95 (3)
  • 1.956 (3)
  • 1.981 (4)
  • 2.0 (7)
  • 2.007 (3)
  • 2.2 (7)
  • 2.235 (7)
  • 2.24 (5)
  • 2.25 (5)
  • 2.388 (7)
  • 2.39 (2)
  • 2.464 (4)
  • 2.5 (7)
  • 2.667 (4)
  • 2.74 (3)
  • 2.743 (7)
  • 2.75 (7)
  • 2.794 (4)
  • 2.997 (7)
  • 3.0 (7)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (7)
  • 3.18 (2)
  • 3.2 (7)
  • 3.245 (3)
  • 3.25 (4)
  • 3.251 (7)
  • 3.27 (3)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (7)
  • 3.607 (4)
  • 3.73 (1)
  • 3.81 (3)
  • 3.84 (3)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (2)
  • 3.988 (4)
  • 4.0 (4)
  • 4.24 (2)
  • 4.242 (4)
  • 4.25 (2)
  • 4.3 (4)
  • 4.5 (4)
  • 4.521 (4)
  • 4.699 (4)
  • 4.775 (4)
  • 4.8 (4)
  • 4.801 (4)
  • 4.81 (4)
  • 4.88 (2)
  • 4.95 (4)
to
Cutting Width
  • 0.0197 (3)
  • 0.031 (3)
  • 0.0315 (3)
  • 0.035 (3)
  • 0.039 (3)
  • 0.0394 (7)
  • 0.041 (3)
  • 0.047 (7)
  • 0.0472 (7)
  • 0.055 (3)
  • 0.0551 (3)
  • 0.058 (3)
  • 0.0591 (7)
  • 0.062 (7)
  • 0.0669 (3)
  • 0.067 (3)
  • 0.0689 (7)
  • 0.072 (4)
  • 0.076 (3)
  • 0.0768 (3)
  • 0.077 (3)
  • 0.078 (4)
  • 0.0787 (7)
  • 0.079 (5)
  • 0.0866 (7)
  • 0.088 (7)
  • 0.0886 (5)
  • 0.094 (7)
  • 0.097 (4)
  • 0.0984 (7)
  • 0.105 (4)
  • 0.108 (7)
  • 0.1083 (7)
  • 0.11 (4)
  • 0.118 (7)
  • 0.1181 (7)
  • 0.122 (4)
  • 0.125 (7)
  • 0.126 (7)
  • 0.1278 (3)
  • 0.128 (7)
  • 0.129 (3)
  • 0.131 (2)
  • 0.1378 (7)
  • 0.142 (4)
  • 0.147 (1)
  • 0.15 (3)
  • 0.151 (3)
  • 0.156 (4)
  • 0.157 (4)
  • 0.1574 (4)
  • 0.1575 (4)
  • 0.167 (4)
  • 0.1673 (2)
  • 0.169 (4)
  • 0.1771 (4)
  • 0.1772 (4)
  • 0.178 (4)
  • 0.185 (4)
  • 0.188 (4)
  • 0.189 (4)
  • 0.192 (2)
  • 0.195 (4)
to