successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (28)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (28)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (28)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (28)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (28)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (28)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (28)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (28)
  • M Stainless Steel (28)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (28)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (28)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (28)
  • K Cast Iron (28)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (28)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (28)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (28)
  • N Non-Ferrous Materials (28)
    • N1
      Wrought Aluminum
      (28)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (28)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (28)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (28)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (28)
    • N6
      Carbon, Graphite Composites, CFRP
      (28)
    • N7
      MMC's
      (28)
  • S High-Temp Alloys (28)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (28)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (28)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (28)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (28)
  • H Hardened Materials (28)
    • H1
      Hardened Materials 44-48 HRC
      (28)
    • H2
      Hardened Materials 48-55 HRC
      (28)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (16)
Applications
  • Back Boring Back Boring (8)
  • Chamfer Turning Chamfer Turning (8)
  • Cut-Off Cut-Off (15)
  • Deep Grooving Deep Grooving (15)
  • Face Grooving Face Grooving (15)
  • Facing Facing (8)
  • Grooving Grooving (27)
  • ID Facing ID Facing (15)
  • ID Grooving ID Grooving (23)
  • ID Thread Turning ID Thread Turning (27)
  • Multiple Direction Cutting Multiple Direction Cutting (28)
  • OD Thread Turning OD Thread Turning (27)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (15)
  • TRN Boring TRN Boring (15)
  • Threading Threading (15)
  • Turning Turning (15)
Type of Thread
  • 60 (28)
  • ACME (17)
  • API (17)
  • API RD (12)
  • BSW (12)
  • BUTTRESS (28)
  • M (18)
  • NPT (12)
  • STUB ACME (12)
  • UN (28)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (28)
  • Lightly Interrupted Cut (28)
  • Smooth Cut (28)
  • Varying Depth of Cut (28)
Tool Cutting Edge Angle
  • 90.0 (20)
  • 93.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (28)
  • 2.0 (28)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (6)
  • 0.051 (6)
  • 0.057 (6)
  • 0.066 (12)
  • 0.076 (28)
  • 0.08 (23)
  • 0.089 (17)
  • 0.09 (17)
  • 0.094 (12)
  • 0.097 (6)
  • 0.1 (23)
  • 0.102 (23)
  • 0.116 (6)
  • 0.117 (6)
  • 0.127 (12)
  • 0.131 (12)
  • 0.132 (12)
  • 0.133 (12)
  • 0.15 (12)
  • 0.155 (10)
  • 0.157 (12)
  • 0.16 (5)
  • 0.165 (17)
  • 0.173 (12)
  • 0.178 (12)
  • 0.18 (6)
  • 0.185 (6)
  • 0.19 (28)
  • 0.191 (28)
  • 0.198 (12)
  • 0.2 (12)
  • 0.202 (18)
  • 0.224 (12)
  • 0.235 (12)
  • 0.244 (6)
  • 0.25 (12)
  • 0.251 (12)
  • 0.254 (17)
  • 0.255 (6)
  • 0.269 (12)
  • 0.282 (12)
  • 0.284 (12)
  • 0.3 (12)
  • 0.315 (15)
  • 0.318 (17)
  • 0.33 (12)
  • 0.34 (12)
  • 0.343 (17)
  • 0.356 (12)
  • 0.404 (12)
  • 0.406 (12)
  • 0.43 (12)
  • 0.445 (17)
  • 0.472 (6)
  • 0.49 (12)
  • 0.5 (11)
  • 0.508 (12)
  • 0.565 (3)
  • 0.57 (6)
  • 0.572 (17)
  • 0.575 (11)
  • 0.75 (11)
  • 0.787 (23)
  • 0.902 (17)
  • 1.0 (23)
  • 1.194 (23)
  • 1.195 (6)
  • 1.25 (23)
  • 1.5 (23)
  • 1.585 (12)
  • 1.588 (28)
  • 1.59 (3)
  • 1.75 (23)
  • 1.98 (6)
  • 1.981 (12)
  • 2.0 (17)
  • 2.25 (17)
  • 2.388 (17)
  • 2.39 (2)
  • 2.5 (5)
  • 3.175 (5)
  • 3.18 (3)
to
Corner Radius
  • 0.002 (6)
  • 0.0023 (6)
  • 0.0026 (12)
  • 0.003 (28)
  • 0.0031 (23)
  • 0.0035 (17)
  • 0.0037 (12)
  • 0.0038 (6)
  • 0.004 (23)
  • 0.0046 (12)
  • 0.005 (12)
  • 0.0052 (12)
  • 0.0053 (12)
  • 0.0059 (12)
  • 0.006 (10)
  • 0.0062 (12)
  • 0.0065 (17)
  • 0.0068 (12)
  • 0.007 (12)
  • 0.0075 (28)
  • 0.0078 (12)
  • 0.0079 (5)
  • 0.008 (18)
  • 0.0088 (12)
  • 0.0093 (12)
  • 0.0096 (6)
  • 0.0099 (12)
  • 0.01 (17)
  • 0.0106 (12)
  • 0.0111 (12)
  • 0.0112 (12)
  • 0.0118 (12)
  • 0.0124 (12)
  • 0.0125 (17)
  • 0.013 (12)
  • 0.0135 (23)
  • 0.014 (12)
  • 0.0159 (12)
  • 0.016 (12)
  • 0.017 (12)
  • 0.0175 (17)
  • 0.0186 (6)
  • 0.0193 (12)
  • 0.0197 (11)
  • 0.02 (12)
  • 0.0225 (17)
  • 0.0295 (11)
  • 0.031 (23)
  • 0.0355 (17)
  • 0.0394 (23)
  • 0.047 (23)
  • 0.0492 (23)
  • 0.0591 (23)
  • 0.0625 (28)
  • 0.0689 (23)
  • 0.078 (12)
  • 0.0787 (17)
  • 0.0886 (17)
  • 0.094 (17)
  • 0.0984 (5)
  • 0.106 (6)
  • 0.125 (5)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (23)
  • K313 (28)
  • K420 (28)
  • K4H (17)
  • K68 (28)
  • KB1345 (17)
  • KB1630 (16)
  • KB5625 (12)
  • KC250 (23)
  • KC5010 (28)
  • KC5025 (28)
  • KC5410 (28)
  • KC710 (28)
  • KC720 (28)
  • KC722 (28)
  • KC730 (28)
  • KC732 (12)
  • KC810 (28)
  • KC850 (28)
  • KC910 (17)
  • KC9110 (28)
  • KC9120 (12)
  • KC9320 (28)
  • KC935 (28)
  • KC950 (28)
  • KCK20 (20)
  • KCK20B (27)
  • KCP10B (28)
  • KCP25B (25)
  • KCU10 (28)
  • KCU25 (27)
  • KD050 (6)
  • KD081 (12)
  • KD100 (15)
  • KD120 (17)
  • KD1425 (11)
  • KT175 (23)
  • KT315 (28)
  • KU10T (28)
  • KU25T (28)
  • KU30T (28)
  • KY3000 (17)
  • THM (23)
  • TN10P (20)
  • TN6010 (28)
  • TN6025 (28)
  • TN7110 (28)
  • WU10HT (6)
  • WU10PT (10)
  • WU25PT (6)
Wiper Insert
  • N (28)
Minimum Axial Groove Diameter
  • 0.0 (19)
  • 1.2598 (2)
  • 1.3386 (2)
  • 1.5748 (3)
  • 1.626 (8)
  • 1.874 (8)
  • 1.9685 (2)
  • 2.229 (8)
  • 2.252 (3)
  • 3.5 (16)
  • 5.5 (8)
  • 6.874 (8)
  • 8.252 (3)
  • 8.752 (3)
to
Minimum Axial Groove Diameter
  • 0.0 (19)
  • 32.0 (2)
  • 34.0 (2)
  • 40.0 (3)
  • 41.3 (8)
  • 47.6 (8)
  • 50.0 (2)
  • 56.625 (8)
  • 57.2 (3)
  • 88.9 (16)
  • 139.7 (8)
  • 174.6 (8)
  • 209.6 (3)
  • 222.3 (3)
to
Maximum Axial Groove Diameter
  • 9999.0 (28)
to
Maximum Axial Groove Diameter
  • 393.661 (28)
to
frontEnd
Clamp Style
  • N (28)
Insert Shape
  • TN-TOP NOTCH (28)
Cutting Width
  • 0.5 (11)
  • 0.787 (11)
  • 0.8 (11)
  • 0.889 (11)
  • 0.991 (11)
  • 1.0 (23)
  • 1.041 (11)
  • 1.19 (17)
  • 1.194 (23)
  • 1.199 (6)
  • 1.2 (23)
  • 1.39 (11)
  • 1.397 (11)
  • 1.4 (11)
  • 1.473 (11)
  • 1.5 (23)
  • 1.56 (6)
  • 1.57 (17)
  • 1.575 (23)
  • 1.69 (11)
  • 1.7 (11)
  • 1.702 (11)
  • 1.75 (23)
  • 1.829 (12)
  • 1.94 (11)
  • 1.95 (11)
  • 1.956 (11)
  • 1.981 (12)
  • 2.0 (23)
  • 2.007 (11)
  • 2.2 (23)
  • 2.235 (23)
  • 2.24 (17)
  • 2.25 (17)
  • 2.388 (23)
  • 2.39 (6)
  • 2.464 (12)
  • 2.5 (23)
  • 2.667 (12)
  • 2.74 (11)
  • 2.743 (23)
  • 2.75 (23)
  • 2.794 (12)
  • 2.997 (23)
  • 3.0 (28)
  • 3.099 (12)
  • 3.17 (12)
  • 3.175 (28)
  • 3.18 (8)
  • 3.2 (28)
  • 3.245 (11)
  • 3.25 (12)
  • 3.251 (23)
  • 3.27 (11)
  • 3.32 (6)
  • 3.329 (6)
  • 3.5 (28)
  • 3.607 (12)
  • 3.73 (6)
  • 3.81 (10)
  • 3.84 (11)
  • 3.96 (12)
  • 3.962 (12)
  • 3.974 (6)
  • 3.988 (12)
  • 4.0 (17)
  • 4.24 (6)
  • 4.242 (16)
  • 4.25 (6)
  • 4.3 (12)
  • 4.5 (17)
  • 4.521 (12)
  • 4.699 (14)
  • 4.775 (17)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (3)
  • 4.8 (12)
  • 4.801 (17)
  • 4.81 (12)
  • 4.88 (6)
  • 4.95 (12)
  • 5.0 (5)
  • 5.004 (5)
  • 5.131 (5)
  • 5.41 (5)
  • 5.5 (5)
  • 5.563 (5)
  • 6.0 (5)
  • 6.35 (5)
  • 6.36 (3)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (11)
  • 0.031 (11)
  • 0.0315 (11)
  • 0.035 (11)
  • 0.039 (11)
  • 0.0394 (23)
  • 0.041 (11)
  • 0.047 (23)
  • 0.0472 (23)
  • 0.055 (11)
  • 0.0551 (11)
  • 0.058 (11)
  • 0.0591 (23)
  • 0.062 (23)
  • 0.0669 (11)
  • 0.067 (11)
  • 0.0689 (23)
  • 0.072 (12)
  • 0.076 (11)
  • 0.0768 (11)
  • 0.077 (11)
  • 0.078 (12)
  • 0.0787 (23)
  • 0.079 (16)
  • 0.0866 (23)
  • 0.088 (23)
  • 0.0886 (17)
  • 0.094 (23)
  • 0.097 (12)
  • 0.0984 (23)
  • 0.105 (12)
  • 0.108 (23)
  • 0.1083 (23)
  • 0.11 (12)
  • 0.118 (23)
  • 0.1181 (28)
  • 0.122 (12)
  • 0.125 (28)
  • 0.126 (28)
  • 0.1278 (11)
  • 0.128 (23)
  • 0.129 (11)
  • 0.131 (6)
  • 0.1378 (28)
  • 0.142 (12)
  • 0.147 (6)
  • 0.15 (10)
  • 0.151 (11)
  • 0.156 (12)
  • 0.157 (12)
  • 0.1574 (17)
  • 0.1575 (17)
  • 0.167 (16)
  • 0.1673 (6)
  • 0.169 (12)
  • 0.1771 (17)
  • 0.1772 (17)
  • 0.178 (12)
  • 0.185 (14)
  • 0.188 (17)
  • 0.189 (17)
  • 0.192 (6)
  • 0.195 (12)
  • 0.1969 (5)
  • 0.197 (5)
  • 0.202 (5)
  • 0.213 (5)
  • 0.2165 (5)
  • 0.2166 (3)
  • 0.219 (5)
  • 0.2362 (5)
  • 0.25 (5)
  • 0.255 (4)
to
Maximum Cutting Depth
  • 0.0 (14)
  • 3.51 (7)
  • 5.33 (7)
to
Maximum Cutting Depth
  • 0.0 (14)
  • 0.138 (1)
  • 0.1382 (6)
  • 0.2098 (6)
  • 0.21 (1)
to
Insert Size
  • 2 (11)
  • 3 (12)
  • 4 (5)
insertGeometry
Cutting Tool Material
  • B H (17)
  • B L (12)
  • C N (17)
  • D P (15)
  • H T (28)
  • H W (28)
backEnd
Back-End Diameter
  • 0.7874 (12)
  • 0.9843 (11)
  • 1.2598 (5)
to
Back-End Diameter
  • 20.0 (12)
  • 25.0 (11)
  • 32.0 (5)
to
other
Platform
  • KM20 (8)
  • KM25 (11)
  • KM2520 (1)
  • KM3225 (4)
Tool Unit
  • I (11)
  • M (17)
Over All Length [L]
  • 25.0 (4)
  • 30.0 (24)
to
Over All Length [L]
  • 0.9843 (4)
  • 1.1811 (24)
to
Insert Hand
  • L (14)
  • R (14)
Cutting Condition Material
  • H-All (28)
  • K-All (28)
  • M-All (28)
  • N-All (28)
  • P-All (28)
  • S-All (28)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
3483035 KM20NEL225 KM20NEL225 KM20 25.0000 .9843 17.0000 .6693 9.5250 .3750 NG2R 0.09 0.21
    3483033 KM20NEL325 KM20NEL325 KM20 25.0000 .9843 17.0000 .6693 9.5250 .3750 NG3R 0.10 0.22
      3483036 KM20NER225 KM20NER225 KM20 25.0000 .9843 17.0000 .6693 9.5250 .3750 NG2L 0.09 0.21
        3483034 KM20NER325 KM20NER325 KM20 25.0000 .9843 17.0000 .6693 9.5250 .3750 NG3L 0.10 0.22
          2399493 KM25NEL230 KM25NEL230 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 NG2R 0.18 0.39
            2399495 KM25NEL330 KM25NEL330 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 NG3R 0.19 0.42
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
              3483029 KM20NSL230 KM20NSL230 KM20 30.0000 1.181 12.5000 .4921 9.5250 .3750 NG2L 0.09 0.19
                3483027 KM20NSL330 KM20NSL330 KM20 30.0000 1.181 12.5000 .4921 9.5250 .3750 NG3L 0.08 0.18
                  3483030 KM20NSR230 KM20NSR230 KM20 30.0000 1.181 12.5000 .4921 9.5250 .3750 NG2R 0.09 0.19
                    3483028 KM20NSR330 KM20NSR330 KM20 30.0000 1.181 12.5000 .4921 9.5250 .3750 NG3R 0.08 0.18
                      2399499 KM25NSL230 KM25NSL230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG2L 0.13 0.29
                        2399501 KM25NSL330 KM25NSL330 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG3L 0.13 0.29
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                          3546331 KM2520NEL230 KM2520NEL230 KM2520 30.0000 1.181 17.0000 .6693 32.0000 1.259 NG2R 0.09 0.20
                            3546643 KM2520NEL330 KM2520NEL330 KM2520 30.0000 1.181 17.0000 .6693 34.0000 1.338 NG3R 0.11 0.23
                              3546332 KM2520NER230 KM2520NER230 KM2520 30.0000 1.181 17.0000 .6693 32.0000 1.259 NG2L 0.09 0.20
                                3546644 KM2520NER330 KM2520NER330 KM2520 30.0000 1.181 17.0000 .6693 34.0000 1.338 NG3L 0.11 0.23
                                  2527468 KM3225NEL230 KM3225NEL230 KM3225 30.0000 1.181 22.0000 .8661 40.0000 1.574 NG2R 0.16 0.34
                                    2527469 KM3225NEL330 KM3225NEL330 KM3225 30.0000 1.181 22.0000 .8661 40.0000 1.574 NG3R 0.14 0.31
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart