successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (192)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (192)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (192)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (192)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (192)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (192)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (192)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (192)
  • M Stainless Steel (192)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (192)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (192)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (192)
  • K Cast Iron (192)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (192)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (192)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (192)
  • N Non-Ferrous Materials (188)
    • N1
      Wrought Aluminum
      (184)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (184)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (136)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (187)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (184)
    • N6
      Carbon, Graphite Composites, CFRP
      (156)
    • N7
      MMC's
      (183)
  • S High-Temp Alloys (192)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (192)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (192)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (192)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (192)
  • H Hardened Materials (157)
    • H1
      Hardened Materials 44-48 HRC
      (157)
    • H2
      Hardened Materials 48-55 HRC
      (140)
    • H3
      Hardened Materials 56-60 HRC
      (129)
    • H4
      Hardened Materials >60 HRC
      (125)
Applications
  • Back Boring Back Boring (40)
  • Chamfer Turning Chamfer Turning (93)
  • Cut-Off Cut-Off (21)
  • Deep Grooving Deep Grooving (21)
  • Face Grooving Face Grooving (21)
  • Facing Facing (93)
  • Grooving Grooving (33)
  • ID Facing ID Facing (21)
  • ID Grooving ID Grooving (29)
  • ID Thread Turning ID Thread Turning (33)
  • Multiple Direction Cutting Multiple Direction Cutting (198)
  • OD Thread Turning OD Thread Turning (33)
  • Plunge Turning Plunge Turning (93)
  • Profiling Profiling (144)
  • TRN Boring TRN Boring (53)
  • Threading Threading (21)
  • Turning Turning (106)
Type of Thread
  • 55 (18)
  • 60 (46)
  • ACME (35)
  • API (23)
  • API BUTTRESS (6)
  • API RD (24)
  • BSPT (12)
  • BSW (30)
  • BUTTRESS (28)
  • M (36)
  • NPT (24)
  • NPTF (12)
  • RD DIN 405 (18)
  • STUB ACME (30)
  • TR DIN 103 (18)
  • UN (40)
  • UNJ (24)
Cutting Condition
  • Heavily Interrupted Cut (174)
  • Interrupted (75)
  • Lightly Interrupted Cut (174)
  • Smooth Cut (174)
  • Varying Depth of Cut (174)
Tool Cutting Edge Angle
  • 45.0 (3)
  • 62.5 (9)
  • 75.0 (11)
  • 90.0 (63)
  • 93.0 (59)
  • 95.0 (41)
  • 107.5 (12)
to
Connection Style
  • KM (171)
Cutting Edges Per Insert
  • 1.0 (117)
  • 2.0 (119)
  • 3.0 (52)
  • 4.0 (78)
  • 6.0 (34)
  • 8.0 (35)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (6)
  • 0.03 (14)
  • 0.038 (32)
  • 0.051 (18)
  • 0.056 (2)
  • 0.057 (6)
  • 0.066 (12)
  • 0.07 (4)
  • 0.076 (38)
  • 0.08 (27)
  • 0.081 (2)
  • 0.082 (4)
  • 0.085 (4)
  • 0.086 (4)
  • 0.089 (17)
  • 0.09 (17)
  • 0.091 (4)
  • 0.094 (12)
  • 0.097 (8)
  • 0.1 (129)
  • 0.102 (53)
  • 0.108 (2)
  • 0.116 (6)
  • 0.117 (6)
  • 0.127 (12)
  • 0.131 (12)
  • 0.132 (12)
  • 0.133 (12)
  • 0.135 (4)
  • 0.15 (12)
  • 0.152 (4)
  • 0.155 (12)
  • 0.157 (12)
  • 0.159 (4)
  • 0.16 (7)
  • 0.165 (17)
  • 0.173 (12)
  • 0.178 (16)
  • 0.18 (6)
  • 0.185 (6)
  • 0.19 (28)
  • 0.191 (28)
  • 0.198 (12)
  • 0.2 (126)
  • 0.202 (18)
  • 0.203 (70)
  • 0.21 (4)
  • 0.223 (4)
  • 0.224 (12)
  • 0.235 (12)
  • 0.24 (4)
  • 0.244 (6)
  • 0.25 (12)
  • 0.251 (12)
  • 0.254 (17)
  • 0.255 (6)
  • 0.269 (16)
  • 0.279 (8)
  • 0.282 (12)
  • 0.284 (12)
  • 0.3 (12)
  • 0.305 (4)
  • 0.31 (4)
  • 0.315 (15)
  • 0.318 (21)
  • 0.33 (12)
  • 0.34 (14)
  • 0.343 (17)
  • 0.356 (12)
  • 0.381 (4)
  • 0.394 (6)
  • 0.397 (122)
  • 0.4 (141)
  • 0.404 (12)
  • 0.406 (38)
  • 0.43 (12)
  • 0.432 (6)
  • 0.445 (17)
  • 0.472 (6)
  • 0.49 (12)
  • 0.5 (11)
  • 0.508 (12)
  • 0.533 (2)
  • 0.565 (3)
  • 0.57 (6)
  • 0.572 (17)
  • 0.575 (11)
  • 0.6 (10)
  • 0.7 (2)
  • 0.75 (11)
  • 0.76 (4)
  • 0.787 (23)
  • 0.79 (9)
  • 0.791 (4)
  • 0.792 (14)
  • 0.794 (131)
  • 0.8 (141)
  • 0.902 (17)
  • 0.93 (2)
  • 0.936 (2)
  • 1.0 (23)
  • 1.01 (1)
  • 1.188 (6)
  • 1.19 (12)
  • 1.191 (102)
  • 1.194 (23)
  • 1.195 (6)
  • 1.2 (139)
  • 1.25 (23)
  • 1.404 (2)
  • 1.5 (23)
  • 1.515 (1)
  • 1.585 (12)
  • 1.587 (12)
  • 1.588 (81)
  • 1.59 (3)
  • 1.6 (76)
  • 1.75 (23)
  • 1.98 (6)
  • 1.981 (12)
  • 2.0 (17)
  • 2.25 (17)
  • 2.381 (14)
  • 2.388 (17)
  • 2.39 (2)
  • 2.4 (27)
  • 2.5 (5)
  • 3.175 (5)
  • 3.18 (11)
  • 3.2 (8)
  • 4.7625 (2)
  • 5.0 (1)
  • 6.35 (2)
to
Corner Radius
  • 0.001 (10)
  • 0.0011 (2)
  • 0.0012 (2)
  • 0.0015 (32)
  • 0.002 (18)
  • 0.0023 (6)
  • 0.0026 (12)
  • 0.0028 (8)
  • 0.003 (38)
  • 0.0031 (27)
  • 0.0032 (6)
  • 0.0033 (4)
  • 0.0034 (4)
  • 0.0035 (17)
  • 0.0037 (12)
  • 0.0038 (8)
  • 0.0039 (4)
  • 0.004 (129)
  • 0.0043 (2)
  • 0.0046 (12)
  • 0.005 (12)
  • 0.0052 (12)
  • 0.0053 (16)
  • 0.0059 (12)
  • 0.006 (16)
  • 0.0062 (12)
  • 0.0063 (6)
  • 0.0065 (17)
  • 0.0068 (12)
  • 0.007 (16)
  • 0.0075 (28)
  • 0.0078 (22)
  • 0.0079 (16)
  • 0.008 (140)
  • 0.0083 (16)
  • 0.0088 (16)
  • 0.0093 (12)
  • 0.0094 (4)
  • 0.0096 (6)
  • 0.0099 (12)
  • 0.01 (17)
  • 0.0106 (16)
  • 0.011 (8)
  • 0.0111 (12)
  • 0.0112 (12)
  • 0.0118 (12)
  • 0.012 (4)
  • 0.0122 (4)
  • 0.0124 (12)
  • 0.0125 (21)
  • 0.013 (14)
  • 0.0135 (23)
  • 0.014 (12)
  • 0.015 (4)
  • 0.0155 (6)
  • 0.0156 (141)
  • 0.0158 (9)
  • 0.0159 (12)
  • 0.016 (101)
  • 0.017 (18)
  • 0.0175 (17)
  • 0.0186 (6)
  • 0.0193 (12)
  • 0.0197 (11)
  • 0.02 (12)
  • 0.021 (2)
  • 0.022 (2)
  • 0.0225 (17)
  • 0.0276 (2)
  • 0.0295 (11)
  • 0.0298 (4)
  • 0.031 (120)
  • 0.0311 (4)
  • 0.0312 (131)
  • 0.0313 (141)
  • 0.0315 (42)
  • 0.0355 (17)
  • 0.0368 (2)
  • 0.0369 (2)
  • 0.0394 (23)
  • 0.0398 (1)
  • 0.0468 (6)
  • 0.0469 (139)
  • 0.047 (91)
  • 0.0472 (22)
  • 0.0492 (23)
  • 0.0516 (9)
  • 0.0553 (2)
  • 0.0591 (23)
  • 0.0597 (1)
  • 0.0625 (99)
  • 0.063 (56)
  • 0.0689 (23)
  • 0.078 (12)
  • 0.0787 (17)
  • 0.0886 (17)
  • 0.0938 (41)
  • 0.094 (17)
  • 0.0984 (5)
  • 0.106 (6)
  • 0.125 (13)
  • 0.1563 (12)
  • 0.1875 (2)
  • 0.1969 (1)
  • 0.197 (1)
  • 0.25 (2)
  • 0.312 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (65)
  • 241 (12)
  • CL4 (33)
  • CM2 (65)
  • CM3 (41)
  • CM4 (31)
  • CPX (55)
  • CW2 (24)
  • CW2015 (65)
  • CW5025 (67)
  • GH1 (10)
  • GX (29)
  • HCK10 (19)
  • HCK20 (2)
  • HK1500 (79)
  • HK35 (19)
  • HT2 (64)
  • HTX (56)
  • HWK15 (20)
  • K060 (45)
  • K090 (69)
  • K1 (20)
  • K1010P (10)
  • K10M (109)
  • K10P (101)
  • K10U (108)
  • K15 (6)
  • K15U (105)
  • K20K (104)
  • K21 (39)
  • K25M (104)
  • K25P (87)
  • K2885 (23)
  • K313 (166)
  • K35P (43)
  • K420 (101)
  • K45 (63)
  • K4H (17)
  • K68 (142)
  • KB1340 (38)
  • KB1345 (72)
  • KB1610 (87)
  • KB1625 (77)
  • KB1630 (72)
  • KB5610 (74)
  • KB5625 (95)
  • KB5630 (58)
  • KB9610 (95)
  • KB9640 (50)
  • KBH10 (91)
  • KBH10B (48)
  • KBH20 (94)
  • KBH20B (48)
  • KBK35 (12)
  • KC210 (45)
  • KC250 (66)
  • KC5010 (185)
  • KC5020P (18)
  • KC5025 (184)
  • KC5410 (137)
  • KC5510 (98)
  • KC5525 (69)
  • KC710 (51)
  • KC720 (155)
  • KC722 (46)
  • KC730 (185)
  • KC7310 (102)
  • KC732 (119)
  • KC8050 (146)
  • KC810 (157)
  • KC850 (168)
  • KC9010 (119)
  • KC9025 (138)
  • KC910 (134)
  • KC9105 (132)
  • KC9110 (173)
  • KC9120 (133)
  • KC9125 (145)
  • KC9125RR (9)
  • KC9140 (104)
  • KC9145 (57)
  • KC9210 (2)
  • KC9215 (102)
  • KC9225 (141)
  • KC9240 (142)
  • KC9240NEW (142)
  • KC9245 (102)
  • KC9315 (144)
  • KC9320 (168)
  • KC9325 (128)
  • KC935 (173)
  • KC950 (134)
  • KC990 (128)
  • KCD25 (48)
  • KCK05 (143)
  • KCK05B (127)
  • KCK15 (132)
  • KCK15B (137)
  • KCK20 (162)
  • KCK20B (168)
  • KCM15 (136)
  • KCM15B (127)
  • KCM25 (142)
  • KCM25B (132)
  • KCM35 (113)
  • KCM35B (71)
  • KCP05 (137)
  • KCP05B (102)
  • KCP10 (145)
  • KCP10B (173)
  • KCP15 (6)
  • KCP25 (146)
  • KCP25B (173)
  • KCP30 (139)
  • KCP30B (80)
  • KCP40 (65)
  • KCP40B (83)
  • KCPK05 (82)
  • KCS10 (52)
  • KCS10B (109)
  • KCU10 (171)
  • KCU25 (161)
  • KD050 (81)
  • KD081 (87)
  • KD100 (57)
  • KD120 (80)
  • KD1400 (86)
  • KD1405 (42)
  • KD1425 (98)
  • KM1 (39)
  • KMF (12)
  • KT1120 (18)
  • KT125 (75)
  • KT150 (55)
  • KT175 (113)
  • KT315 (169)
  • KT325 (75)
  • KT5020 (20)
  • KTP10 (44)
  • KU10 (24)
  • KU10T (165)
  • KU25T (34)
  • KU30T (169)
  • KY1310 (55)
  • KY1320 (75)
  • KY1540 (43)
  • KY1615 (69)
  • KY2000 (45)
  • KY2100 (35)
  • KY3000 (82)
  • KY3400 (63)
  • KY3500 (75)
  • KY4000 (31)
  • KY4300 (26)
  • KY4400 (77)
  • KYHK15B (77)
  • KYK10 (55)
  • KYK25 (63)
  • KYK35 (75)
  • KYS25 (35)
  • KYS30 (45)
  • NL200 (14)
  • NL250 (92)
  • NL300 (44)
  • NL400 (22)
  • NL920 (65)
  • P25 (35)
  • PB100 (28)
  • PB170 (21)
  • PB250 (31)
  • PB300 (12)
  • PD100 (19)
  • PD50 (13)
  • PN120 (4)
  • PS5 (31)
  • SP0819 (42)
  • SP0A00 (9)
  • SP0G00 (1)
  • SP0PW3 (3)
  • SP3019 (49)
  • SP4019 (43)
  • SP4036 (10)
  • SP4066 (2)
  • SP4093 (10)
  • SP61EJ (9)
  • SPN3W1 (6)
  • THM (92)
  • THM-X (32)
  • THMF-X (31)
  • TN10P (161)
  • TN10U (114)
  • TN15M (119)
  • TN15U (105)
  • TN2000 (82)
  • TN20K (122)
  • TN20P (143)
  • TN30M (136)
  • TN30P (65)
  • TN4000 (70)
  • TN5015 (100)
  • TN5020 (105)
  • TN5105 (113)
  • TN5120 (120)
  • TN6010 (96)
  • TN6025 (107)
  • TN7005 (87)
  • TN7010 (124)
  • TN7015 (124)
  • TN7025 (124)
  • TN7035 (89)
  • TN7105 (90)
  • TN7110 (134)
  • TN7115 (120)
  • TN7125 (106)
  • TN7135 (89)
  • TN8025 (119)
  • TTI15 (54)
  • TTM (6)
  • TTM09 (40)
  • TTR (61)
  • TTS (43)
  • TTX (55)
  • W00342 (18)
  • WBH10C (60)
  • WBH10P (58)
  • WBH10U (77)
  • WBH25P (68)
  • WBH25U (69)
  • WBH30P (58)
  • WBK40U (38)
  • WBK45U (63)
  • WDN00U (32)
  • WDN25U (86)
  • WK05CT (131)
  • WK15CT (81)
  • WK20CT (138)
  • WM15CT (132)
  • WM25CT (137)
  • WM35CT (98)
  • WP05CT (22)
  • WP15CT (142)
  • WP20TT (33)
  • WP25CT (142)
  • WP35CT (132)
  • WS10PT (128)
  • WS25PT (125)
  • WU10HT (135)
  • WU10PT (10)
  • WU25PT (6)
  • X00511 (12)
Hand Of Tool
  • L (84)
  • N (7)
  • R (80)
Wiper Insert
  • N (192)
  • Y (66)
Minimum Axial Groove Diameter
  • 0.0 (19)
  • 1.2598 (25)
  • 1.26 (2)
  • 1.3386 (2)
  • 1.5748 (39)
  • 1.626 (8)
  • 1.874 (8)
  • 1.9685 (6)
  • 2.229 (8)
  • 2.252 (3)
  • 3.5 (16)
  • 5.5 (8)
  • 6.874 (8)
  • 8.252 (3)
  • 8.752 (3)
to
Minimum Axial Groove Diameter
  • 0.0 (19)
  • 32.0 (27)
  • 34.0 (2)
  • 40.0 (39)
  • 41.3 (8)
  • 47.6 (8)
  • 50.0 (6)
  • 56.625 (8)
  • 57.2 (3)
  • 88.9 (16)
  • 139.7 (8)
  • 174.6 (8)
  • 209.6 (3)
  • 222.3 (3)
to
Maximum Axial Groove Diameter
  • 9999.0 (28)
to
Maximum Axial Groove Diameter
  • 393.661 (28)
to
Cutting Direction
  • B (29)
  • E (56)
  • S (85)
Rake Angle Style
  • DOUBLE NEGATIVE (101)
  • NEGATIVE-ZERO (6)
  • NEUTRAL (ZERO) (64)
Boring Bar Material
  • S (47)
frontEnd
Clamp Style
  • C (10)
  • M (101)
  • N (28)
  • P (14)
  • S (44)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (31)
  • D-DIAMOND/RHOMBIC 55 (48)
  • LT-TRIANGLE LAY DOWN THREAD 60 (14)
  • R-ROUND (5)
  • S-SQUARE 90 (10)
  • T-TRIANGLE 60 (28)
  • TN-TOP NOTCH (28)
  • V-DIAMOND/RHOMBIC 35 (18)
  • W-TRIGON 80 (16)
Cutting Width
  • 0.5 (11)
  • 0.787 (11)
  • 0.8 (11)
  • 0.889 (11)
  • 0.991 (11)
  • 1.0 (23)
  • 1.041 (11)
  • 1.19 (17)
  • 1.194 (23)
  • 1.199 (6)
  • 1.2 (23)
  • 1.39 (11)
  • 1.397 (11)
  • 1.4 (11)
  • 1.473 (11)
  • 1.5 (23)
  • 1.56 (6)
  • 1.57 (17)
  • 1.575 (23)
  • 1.69 (11)
  • 1.7 (11)
  • 1.702 (11)
  • 1.75 (23)
  • 1.829 (12)
  • 1.94 (11)
  • 1.95 (11)
  • 1.956 (11)
  • 1.981 (12)
  • 2.0 (23)
  • 2.007 (11)
  • 2.2 (23)
  • 2.235 (23)
  • 2.24 (17)
  • 2.25 (17)
  • 2.388 (23)
  • 2.39 (6)
  • 2.464 (12)
  • 2.5 (23)
  • 2.667 (12)
  • 2.74 (11)
  • 2.743 (23)
  • 2.75 (23)
  • 2.794 (12)
  • 2.997 (23)
  • 3.0 (28)
  • 3.099 (12)
  • 3.17 (12)
  • 3.175 (28)
  • 3.18 (8)
  • 3.2 (28)
  • 3.245 (11)
  • 3.25 (12)
  • 3.251 (23)
  • 3.27 (11)
  • 3.32 (6)
  • 3.329 (6)
  • 3.5 (28)
  • 3.607 (12)
  • 3.73 (6)
  • 3.81 (11)
  • 3.84 (11)
  • 3.96 (12)
  • 3.962 (12)
  • 3.974 (6)
  • 3.988 (12)
  • 4.0 (17)
  • 4.24 (6)
  • 4.242 (17)
  • 4.25 (6)
  • 4.3 (12)
  • 4.5 (17)
  • 4.521 (12)
  • 4.699 (14)
  • 4.775 (17)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (3)
  • 4.8 (12)
  • 4.801 (17)
  • 4.81 (12)
  • 4.88 (6)
  • 4.95 (12)
  • 5.0 (5)
  • 5.004 (5)
  • 5.131 (5)
  • 5.41 (5)
  • 5.5 (5)
  • 5.563 (5)
  • 6.0 (5)
  • 6.35 (5)
  • 6.36 (3)
  • 6.48 (5)
to
Cutting Width
  • 0.0197 (11)
  • 0.031 (11)
  • 0.0315 (11)
  • 0.035 (11)
  • 0.039 (11)