Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (124)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (124)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (124)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (124)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (124)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (124)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (124)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (124)
  • M Stainless Steel (124)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (124)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (124)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (124)
  • K Cast Iron (124)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (124)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (124)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (124)
  • N Non-Ferrous Materials (117)
    • N1
      Wrought Aluminum
      (116)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (116)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (114)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (101)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (100)
    • N6
      Carbon, Graphite Composites, CFRP
      (98)
    • N7
      MMC's
      (100)
  • S High-Temp Alloys (124)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (124)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (124)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (124)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (124)
  • H Hardened Materials (97)
    • H1
      Hardened Materials 44-48 HRC
      (97)
    • H2
      Hardened Materials 48-55 HRC
      (91)
    • H3
      Hardened Materials 56-60 HRC
      (81)
    • H4
      Hardened Materials >60 HRC
      (80)
Applications
  • Back Boring Back Boring (49)
  • Chamfer Turning Chamfer Turning (66)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (66)
  • Grooving Grooving (12)
  • ID Facing ID Facing (8)
  • ID Grooving ID Grooving (10)
  • ID Thread Turning ID Thread Turning (12)
  • Multiple Direction Cutting Multiple Direction Cutting (155)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (66)
  • Profiling Profiling (107)
  • TRN Boring TRN Boring (49)
  • Threading Threading (8)
  • Turning Turning (66)
Type of Thread
  • 55 (6)
  • 60 (18)
  • ACME (8)
  • API (2)
  • API RD (8)
  • BSPT (6)
  • BSW (8)
  • BUTTRESS (12)
  • M (13)
  • NPT (8)
  • NPTF (6)
  • RD DIN 405 (6)
  • STUB ACME (8)
  • TR DIN 103 (6)
  • UN (18)
  • UNJ (8)
Cutting Condition
  • Heavily Interrupted Cut (81)
  • Interrupted (6)
  • Lightly Interrupted Cut (99)
  • Smooth Cut (99)
  • Varying Depth of Cut (94)
Tool Cutting Edge Angle
  • 45.0 (1)
  • 62.5 (2)
  • 67.5 (4)
  • 90.0 (52)
  • 92.0 (8)
  • 93.0 (28)
  • 95.0 (56)
  • 97.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (92)
  • 2.0 (73)
  • 3.0 (48)
  • 4.0 (19)
  • 6.0 (2)
  • 8.0 (5)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (1)
  • 0.03 (22)
  • 0.038 (49)
  • 0.05 (22)
  • 0.051 (17)
  • 0.057 (1)
  • 0.066 (2)
  • 0.076 (18)
  • 0.08 (15)
  • 0.082 (3)
  • 0.085 (3)
  • 0.086 (3)
  • 0.089 (11)
  • 0.09 (11)
  • 0.091 (3)
  • 0.094 (2)
  • 0.097 (1)
  • 0.1 (70)
  • 0.102 (14)
  • 0.116 (1)
  • 0.117 (1)
  • 0.127 (2)
  • 0.131 (2)
  • 0.132 (2)
  • 0.133 (2)
  • 0.135 (3)
  • 0.15 (2)
  • 0.155 (2)
  • 0.157 (2)
  • 0.159 (3)
  • 0.165 (2)
  • 0.173 (2)
  • 0.177 (8)
  • 0.178 (34)
  • 0.18 (38)
  • 0.185 (5)
  • 0.19 (12)
  • 0.191 (12)
  • 0.198 (2)
  • 0.2 (63)
  • 0.202 (7)
  • 0.203 (40)
  • 0.223 (3)
  • 0.224 (2)
  • 0.235 (2)
  • 0.24 (3)
  • 0.244 (1)
  • 0.25 (2)
  • 0.251 (2)
  • 0.254 (2)
  • 0.255 (1)
  • 0.269 (5)
  • 0.279 (6)
  • 0.282 (2)
  • 0.284 (2)
  • 0.3 (2)
  • 0.31 (3)
  • 0.315 (2)
  • 0.318 (5)
  • 0.33 (2)
  • 0.34 (2)
  • 0.343 (6)
  • 0.356 (2)
  • 0.38 (33)
  • 0.381 (24)
  • 0.394 (6)
  • 0.397 (72)
  • 0.4 (64)
  • 0.404 (2)
  • 0.406 (4)
  • 0.43 (2)
  • 0.445 (2)
  • 0.472 (1)
  • 0.49 (2)
  • 0.5 (10)
  • 0.508 (2)
  • 0.57 (1)
  • 0.572 (2)
  • 0.575 (1)
  • 0.75 (10)
  • 0.76 (3)
  • 0.787 (20)
  • 0.791 (6)
  • 0.792 (2)
  • 0.794 (73)
  • 0.8 (69)
  • 0.902 (2)
  • 1.0 (12)
  • 1.188 (3)
  • 1.19 (4)
  • 1.191 (18)
  • 1.194 (12)
  • 1.195 (1)
  • 1.2 (44)
  • 1.25 (12)
  • 1.5 (12)
  • 1.585 (2)
  • 1.587 (2)
  • 1.588 (14)
  • 1.6 (14)
  • 1.75 (12)
  • 1.98 (1)
  • 1.981 (2)
  • 2.0 (2)
  • 2.25 (2)
  • 2.388 (2)
  • 2.4 (2)
to
Corner Radius
  • 0.001 (12)
  • 0.0011 (10)
  • 0.0015 (49)
  • 0.002 (29)
  • 0.0023 (1)
  • 0.0026 (2)
  • 0.0028 (3)
  • 0.003 (18)
  • 0.0031 (15)
  • 0.0032 (3)
  • 0.0033 (3)
  • 0.0034 (3)
  • 0.0035 (11)
  • 0.0037 (2)
  • 0.0038 (1)
  • 0.0039 (3)
  • 0.004 (67)
  • 0.0046 (2)
  • 0.005 (2)
  • 0.0052 (2)
  • 0.0053 (5)
  • 0.0059 (2)
  • 0.006 (2)
  • 0.0062 (2)
  • 0.0063 (3)
  • 0.0065 (2)
  • 0.0068 (2)
  • 0.007 (38)
  • 0.0075 (12)
  • 0.0078 (14)
  • 0.0079 (13)
  • 0.008 (74)
  • 0.0083 (2)
  • 0.0088 (5)
  • 0.0093 (2)
  • 0.0094 (3)
  • 0.0096 (1)
  • 0.0099 (2)
  • 0.01 (2)
  • 0.0106 (5)
  • 0.011 (6)
  • 0.0111 (2)
  • 0.0112 (2)
  • 0.0118 (2)
  • 0.0122 (3)
  • 0.0124 (2)
  • 0.0125 (5)
  • 0.013 (2)
  • 0.0135 (7)
  • 0.014 (2)
  • 0.015 (36)
  • 0.0155 (6)
  • 0.0156 (64)
  • 0.0158 (6)
  • 0.0159 (2)
  • 0.016 (14)
  • 0.017 (2)
  • 0.0175 (2)
  • 0.0186 (1)
  • 0.0193 (2)
  • 0.0197 (10)
  • 0.02 (2)
  • 0.0225 (2)
  • 0.0295 (10)
  • 0.0298 (3)
  • 0.031 (37)
  • 0.0311 (6)
  • 0.0312 (72)
  • 0.0313 (69)
  • 0.0315 (35)
  • 0.0355 (2)
  • 0.0394 (12)
  • 0.0468 (3)
  • 0.0469 (44)
  • 0.047 (20)
  • 0.0472 (14)
  • 0.0492 (12)
  • 0.0591 (12)
  • 0.0625 (26)
  • 0.063 (4)
  • 0.0689 (12)
  • 0.078 (2)
  • 0.0787 (2)
  • 0.0886 (2)
  • 0.0938 (2)
  • 0.094 (2)
  • 0.106 (1)
  • 0.1563 (2)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • ALO (21)
  • C2 (11)
  • C25 (18)
  • C3 (11)
  • CBN6 (11)
  • CG5 (41)
  • CG6 (33)
  • CL4 (4)
  • CM1 (41)
  • CM2 (4)
  • CM3 (4)
  • CM4 (4)
  • CPD1 (11)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (4)
  • GH1 (12)
  • GX (2)
  • HCK10 (22)
  • HK1500 (29)
  • HK35 (12)
  • HT2 (53)
  • HTX (53)
  • HWK10 (8)
  • HWK15 (22)
  • K00379 (10)
  • K060 (4)
  • K090 (5)
  • K1 (2)
  • K1010P (12)
  • K10M (43)
  • K10P (31)
  • K10U (54)
  • K15U (53)
  • K20K (41)
  • K21 (4)
  • K25M (26)
  • K25P (17)
  • K2885 (12)
  • K313 (83)
  • K35P (2)
  • K420 (38)
  • K45 (4)
  • K4H (7)
  • K68 (75)
  • KB1340 (4)
  • KB1345 (30)
  • KB1610 (41)
  • KB1625 (29)
  • KB1630 (20)
  • KB5610 (43)
  • KB5625 (57)
  • KB5630 (29)
  • KB9610 (49)
  • KB9640 (4)
  • KBH10 (47)
  • KBH10B (4)
  • KBH20 (49)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (2)
  • KC250 (14)
  • KC5010 (120)
  • KC5020P (25)
  • KC5025 (106)
  • KC5410 (71)
  • KC5510 (6)
  • KC5525 (4)
  • KC710 (35)
  • KC720 (77)
  • KC722 (17)
  • KC730 (109)
  • KC7310 (8)
  • KC732 (66)
  • KC8050 (64)
  • KC810 (74)
  • KC850 (81)
  • KC9010 (45)
  • KC9025 (69)
  • KC910 (72)
  • KC9105 (61)
  • KC9110 (76)
  • KC9120 (53)
  • KC9125 (64)
  • KC9140 (9)
  • KC9145 (2)
  • KC9215 (9)
  • KC9225 (64)
  • KC9240 (63)
  • KC9240NEW (63)
  • KC9245 (8)
  • KC9315 (64)
  • KC9320 (73)
  • KC9325 (48)
  • KC935 (91)
  • KC950 (62)
  • KC990 (51)
  • KCD25 (55)
  • KCK05 (64)
  • KCK05B (57)
  • KCK15 (51)
  • KCK15B (54)
  • KCK20 (68)
  • KCK20B (73)
  • KCM15 (63)
  • KCM15B (43)
  • KCM25 (63)
  • KCM25B (61)
  • KCM35 (49)
  • KCM35B (40)
  • KCP05 (62)
  • KCP05B (19)
  • KCP10 (64)
  • KCP10B (76)
  • KCP15 (3)
  • KCP25 (69)
  • KCP25B (76)
  • KCP30 (64)
  • KCP30B (14)
  • KCP40 (4)
  • KCP40B (9)
  • KCPK05 (4)
  • KCS10 (62)
  • KCS10B (57)
  • KCU10 (98)
  • KCU25 (95)
  • KD050 (30)
  • KD081 (45)
  • KD100 (33)
  • KD105 (2)
  • KD120 (10)
  • KD1400 (69)
  • KD1405 (9)
  • KD1425 (71)
  • KM1 (4)
  • KMF (2)
  • KT1120 (2)
  • KT125 (16)
  • KT150 (5)
  • KT175 (55)
  • KT315 (99)
  • KT325 (55)
  • KT5020 (2)
  • KTP10 (55)
  • KU10 (45)
  • KU10T (73)
  • KU25T (15)
  • KU30T (73)
  • KY1310 (4)
  • KY1320 (4)
  • KY1540 (2)
  • KY1615 (5)
  • KY2000 (4)
  • KY2100 (2)
  • KY3000 (6)
  • KY3400 (4)
  • KY3500 (4)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (4)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (4)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (6)
  • NL300 (4)
  • NL400 (2)
  • NL920 (4)
  • P25 (2)
  • PB100 (28)
  • PB170 (16)
  • PB250 (28)
  • PB300 (10)
  • PD100 (22)
  • PD50 (12)
  • PN120 (3)
  • PS5 (4)
  • SP0819 (4)
  • SP0G00 (8)
  • SP0NTA (1)
  • SP3019 (4)
  • SP4019 (2)
  • SPM5F2 (18)
  • SPN3W1 (10)
  • THM (55)
  • THM-X (24)
  • THMF-X (4)
  • TN10P (65)
  • TN10U (54)
  • TN15M (55)
  • TN15U (53)
  • TN2000 (29)
  • TN20K (54)
  • TN20P (58)
  • TN30M (57)
  • TN30P (4)
  • TN4000 (17)
  • TN5015 (42)
  • TN5020 (37)
  • TN5105 (42)
  • TN5120 (45)
  • TN6010 (42)
  • TN6025 (50)
  • TN7 (29)
  • TN7005 (37)
  • TN7010 (40)
  • TN7015 (48)
  • TN7025 (40)
  • TN7035 (36)
  • TN7105 (45)
  • TN7110 (58)
  • TN7115 (46)
  • TN7125 (46)
  • TN7135 (44)
  • TN8025 (34)
  • TTI15 (37)
  • TTM (10)
  • TTM09 (16)
  • TTR (38)
  • TTS (17)
  • TTX (29)
  • W00160 (2)
  • W00342 (12)
  • WBH10C (29)
  • WBH10P (29)
  • WBH10U (39)
  • WBH25P (39)
  • WBH25U (25)
  • WBH30P (29)
  • WBK40U (4)
  • WBK45U (40)
  • WDN00U (16)
  • WDN10U (11)
  • WDN25U (69)
  • WK05CT (43)
  • WK15CT (43)
  • WK20CT (70)
  • WM15CT (57)
  • WM25CT (60)
  • WM35CT (6)
  • WP05CT (2)
  • WP15CT (60)
  • WP20TT (25)
  • WP25CT (62)
  • WP35CT (31)
  • WS10PT (35)
  • WS25PT (34)
  • WU10HT (7)
  • WU10PT (5)
  • WU25PT (1)
  • X00511 (2)
  • YY3A00 (8)
Wiper Insert
  • N (124)
  • Y (20)
Minimum Axial Groove Diameter
  • 0.0 (10)
  • 0.188 (4)
  • 0.227 (3)
  • 0.236 (1)
  • 0.273 (2)
  • 0.278 (4)
  • 0.279 (2)
  • 0.308 (2)
  • 0.342 (4)
  • 0.36 (10)
  • 0.384 (4)
  • 0.4 (4)
  • 0.422 (5)
  • 0.437 (8)
  • 0.439 (7)
  • 0.561 (4)
  • 0.9843 (6)
  • 1.2598 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.229 (8)
  • 3.5 (10)
  • 5.5 (2)
  • 6.874 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (10)
  • 4.77 (4)
  • 5.78 (3)
  • 6.0 (1)
  • 6.93 (2)
  • 7.06 (4)
  • 7.09 (2)
  • 7.82 (2)
  • 8.68 (4)
  • 9.14 (10)
  • 9.75 (4)
  • 10.16 (4)
  • 10.72 (5)
  • 11.1 (8)
  • 11.15 (7)
  • 14.25 (4)
  • 25.0 (6)
  • 32.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 56.625 (8)
  • 88.9 (10)
  • 139.7 (2)
  • 174.6 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (12)
to
Maximum Axial Groove Diameter
  • 393.661 (12)
to
Maximum Bore Depth
  • 16.8 (4)
  • 20.8 (4)
  • 22.2 (1)
  • 22.21 (1)
  • 25.4 (2)
  • 25.7 (2)
  • 25.8 (4)
  • 26.4 (10)
  • 33.0 (13)
  • 38.4 (4)
  • 41.0 (15)
  • 51.8 (4)
to
Maximum Bore Depth
  • 0.66 (3)
  • 0.661 (1)
  • 0.819 (1)
  • 0.82 (3)
  • 0.874 (2)
  • 1.0 (2)
  • 1.012 (2)
  • 1.016 (2)
  • 1.02 (2)
  • 1.039 (6)
  • 1.04 (4)
  • 1.299 (6)
  • 1.3 (7)
  • 1.51 (2)
  • 1.512 (2)
  • 1.614 (8)
  • 1.6142 (7)
  • 2.0394 (4)
to
frontEnd
Clamp Style
  • N (12)
  • P (9)
  • S (134)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (38)
  • D-DIAMOND/RHOMBIC 55 (16)
  • G-RHOMBIC 45 (23)
  • LT-TRIANGLE LAY DOWN THREAD 60 (6)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (41)
  • TN-TOP NOTCH (12)
  • V-DIAMOND/RHOMBIC 35 (13)
  • W-TRIGON 80 (5)
Cutting Width
  • 0.381 (4)
  • 0.5 (10)
  • 0.508 (4)
  • 0.635 (4)
  • 0.762 (4)
  • 0.787 (10)
  • 0.8 (10)
  • 0.889 (10)
  • 0.991 (10)
  • 1.0 (12)
  • 1.016 (4)
  • 1.041 (10)
  • 1.19 (11)
  • 1.194 (12)
  • 1.199 (5)
  • 1.2 (12)
  • 1.39 (10)
  • 1.397 (10)
  • 1.4 (10)
  • 1.473 (10)
  • 1.5 (12)
  • 1.56 (5)
  • 1.57 (7)
  • 1.575 (12)
  • 1.69 (10)
  • 1.7 (10)
  • 1.702 (10)
  • 1.75 (12)
  • 1.829 (2)
  • 1.94 (10)
  • 1.95 (10)
  • 1.956 (10)
  • 1.981 (2)
  • 2.0 (12)
  • 2.007 (10)
  • 2.2 (12)
  • 2.235 (12)
  • 2.24 (11)
  • 2.25 (11)
  • 2.388 (12)
  • 2.39 (1)
  • 2.464 (2)
  • 2.5 (12)
  • 2.667 (2)
  • 2.74 (10)
  • 2.743 (12)
  • 2.75 (12)
  • 2.794 (2)
  • 2.997 (12)
  • 3.0 (12)
  • 3.099 (2)
  • 3.17 (2)
  • 3.175 (12)
  • 3.18 (5)
  • 3.2 (12)
  • 3.245 (10)
  • 3.25 (2)
  • 3.251 (12)
  • 3.27 (10)
  • 3.32 (1)
  • 3.329 (1)
  • 3.5 (12)
  • 3.607 (2)
  • 3.73 (5)
  • 3.81 (10)
  • 3.84 (10)
  • 3.96 (2)
  • 3.962 (2)
  • 3.974 (1)
  • 3.988 (2)
  • 4.0 (2)
  • 4.24 (1)
  • 4.242 (2)
  • 4.25 (1)
  • 4.3 (2)
  • 4.5 (2)
  • 4.521 (2)
  • 4.699 (2)
  • 4.775 (2)
  • 4.8 (2)
  • 4.801 (2)
  • 4.81 (2)
  • 4.88 (1)
  • 4.95 (2)
to
Cutting Width
  • 0.015 (4)
  • 0.0197 (10)
  • 0.02 (4)
  • 0.025 (4)
  • 0.03 (4)
  • 0.031 (10)
  • 0.0315 (10)
  • 0.035 (10)
  • 0.039 (10)
  • 0.0394 (12)
  • 0.04 (4)
  • 0.041 (10)
  • 0.047 (12)
  • 0.0472 (12)
  • 0.055 (10)
  • 0.0551 (10)
  • 0.058 (10)
  • 0.0591 (12)