Online-Produktbestellung
successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Erfahren Sie mehr

Werkzeugkörper

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
Select First Choice
  • IN (3)
Applications
  • Chamfer Milling Chamfer Milling (16)
  • Countersinking Countersinking (16)
  • Drilling Drilling (16)
  • Face Milling Face Milling (16)
  • Flat Bottom Drilling Flat Bottom Drilling (16)
  • Pipe Thread Pipe Thread (16)
  • Pocket Pocket (16)
  • Pocket Helical Pocket Helical (16)
  • Pocket Milling Pocket Milling (16)
  • Pocket Plunge Milling Pocket Plunge Milling (16)
  • Profile Milling Profile Milling (16)
  • Ramping Ramping (16)
  • Shoulder Ball Nose Shoulder Ball Nose (16)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (16)
  • Shoulder Milling Shoulder Milling (16)
  • Shoulder Roughing Shoulder Roughing (16)
  • Shoulder Square End Shoulder Square End (16)
  • Slot Ball Nose Slot Ball Nose (16)
  • Slot Milling Slot Milling (16)
  • Slot Side Slot Side (16)
  • Slot Square End Slot Square End (16)
  • Slot T Slot T (16)
  • Thread Milling Thread Milling (16)
  • Threading Threading (16)
Cutting Diameter
  • 34.0 (1)
  • 34.8 (1)
  • 36.0 (1)
  • 47.0 (2)
  • 47.5 (1)
  • 50.0 (1)
  • 60.2 (2)
  • 64.0 (2)
  • 84.0 (2)
  • 85.6 (2)
  • 109.0 (1)
to
Cutting Diameter
  • 1.339 (1)
  • 1.37 (1)
  • 1.417 (1)
  • 1.85 (2)
  • 1.87 (1)
  • 1.969 (1)
  • 2.37 (2)
  • 2.52 (2)
  • 3.307 (2)
  • 3.37 (2)
  • 4.291 (1)
to
Cutting Length
  • 0.156 (16)
to
Cutting Length
  • 3.97 (16)
to
Tool Cutting Edge Angle
  • 90.0 (16)
to
Connection Style
  • A-Socket Head Cap Screw (16)
Cutting Edges Per Insert
  • 2.0 (16)
to
cornerConfiguration
Corner Radius
  • 8.0 (16)
to
Corner Radius
  • 0.315 (16)
to
application
Grade Of Cutting Tool
  • WK15CM (16)
  • WN25PM (16)
  • WP20CM (16)
  • WP25PM (16)
  • WP35CM (16)
  • WP40PM (16)
  • WS30PM (16)
  • WS40PM (16)
  • WU35PM (16)
Hand Of Tool
  • R (16)
Maximum Ramp Angle
  • 0.17 (2)
  • 0.21 (1)
  • 0.26 (2)
  • 0.32 (2)
  • 0.33 (1)
  • 0.35 (1)
  • 0.38 (1)
  • 0.39 (1)
  • 0.4 (2)
  • 0.42 (1)
  • 0.49 (1)
  • 0.52 (1)
to
frontEnd
Insert Shape
  • R-ROUND (16)
backEnd
Connection Type
  • SHELL MILL (16)
Back-End Diameter
  • 0.75 (1)
  • 0.866 (4)
  • 1.0 (3)
  • 1.063 (3)
  • 1.26 (2)
  • 1.5 (2)
  • 1.575 (1)
to
Back-End Diameter
  • 19.05 (1)
  • 22.0 (4)
  • 25.4 (3)
  • 27.0 (3)
  • 32.0 (2)
  • 38.12 (2)
  • 40.0 (1)
to
other
Platform
  • M200 Series (16)
Tool Unit
  • I (6)
  • M (10)
Over All Length [L]
  • 50.0 (9)
  • 50.8 (6)
  • 63.0 (1)
to
Over All Length [L]
  • 1.969 (9)
  • 2.0 (6)
  • 2.48 (1)
to
obsoleteFacet
  • false (16)
  • true (16)
Number of Inserts
  • 4.0 (4)
  • 5.0 (4)
  • 6.0 (3)
  • 7.0 (2)
  • 8.0 (3)
to
No filters matching ""
View Products in
Metric
Inch
Kopierfräser • M200™

IC16 • Aufsteckfräser
(10 Products)
  • Fräsen – EckfräsenFräsen – Eckfräsen
  • 3D-Profilfräsen/Kopierfräsen3D-Profilfräsen/Kopierfräsen
  • Umfangfräsen/Schulterfräsen: Kugelkopf / VollradiusUmfangfräsen/Schulterfräsen: Kugelkopf / Vollradius
  • Nutenfräsen: Ebene StirnflächeNutenfräsen: Ebene Stirnfläche
  • PlanfräsenPlanfräsen
  • AuskammernAuskammern
  • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
5210216 M200D100Z06RN16 M200D100Z06RN16 100.0000 3.937 84.0000 3.307 32.0 1.26 78.0000 3.071 50.0000 1.969 3.9700 .1560 6 0.260 17000 Y 1.36
    5210217 M200D100Z08RN16 M200D100Z08RN16 100.0000 3.937 84.0000 3.307 32.0 1.26 78.0000 3.071 50.0000 1.969 3.9700 .1560 8 0.260 17000 Y 1.37
      5210218 M200D125Z08RN16 M200D125Z08RN16 125.0000 4.921 109.0000 4.291 40.0 1.575 89.5000 3.524 63.0000 2.480 3.9700 .1560 8 0.210 14900 Y 2.50
        5209989 M200D50Z04RN16 M200D50Z04RN16 50.0000 1.969 34.0000 1.339 22.0 .866 42.0000 1.654 50.0000 1.969 3.9700 .1560 4 0.490 26700 Y 0.36
          5210210 M200D52Z04RN16 M200D52Z04RN16 52.0000 2.047 36.0000 1.417 22.0 .866 42.0000 1.654 50.0000 1.969 3.9700 .1560 4 0.420 26000 Y 0.39
            5210211 M200D63Z04RN16 M200D63Z04RN16 63.0000 2.480 47.0000 1.850 22.0 .866 49.0000 1.929 50.0000 1.969 3.9700 .1560 4 0.400 22700 Y 0.58
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Copy Mills • M200™ Series

              IC16 • Shell Mills
              (6 Products)
              • Fräsen – EckfräsenFräsen – Eckfräsen
              • 3D-Profilfräsen/Kopierfräsen3D-Profilfräsen/Kopierfräsen
              • Umfangfräsen/Schulterfräsen: Kugelkopf / VollradiusUmfangfräsen/Schulterfräsen: Kugelkopf / Vollradius
              • Nutenfräsen: Ebene StirnflächeNutenfräsen: Ebene Stirnfläche
              • PlanfräsenPlanfräsen
              • AuskammernAuskammern
              • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
              5283521 M200D200Z04S075RN16 M200D200Z04S075RN16 50.8000 2.000 34.8000 1.370 19.05 .75 44.5000 1.752 50.8000 2.000 3.9700 .1560 4 0.520 26400 Y 0.91
                5283522 M200D250Z05S100RN16 M200D250Z05S100RN16 63.5000 2.500 47.5000 1.870 25.4 1.0 55.6000 2.189 50.8000 2.000 3.9700 .1560 5 0.390 22600 Y 1.51
                  5283523 M200D300Z05S100RN16 M200D300Z05S100RN16 76.2000 3.000 60.2000 2.370 25.4 1.0 55.6000 2.189 50.8000 2.000 3.9700 .1560 5 0.350 20100 Y 2.01
                    5283524 M200D300Z07S100RN16 M200D300Z07S100RN16 76.2000 3.000 60.2000 2.370 25.4 1.0 55.6000 2.189 50.8000 2.000 3.9700 .1560 7 0.330 20100 Y 1.91
                      5283525 M200D400Z06S150RN16 M200D400Z06S150RN16 101.6000 4.000 85.6000 3.370 38.12 1.5 96.8400 3.812 50.8000 2.000 3.9700 .1560 6 0.170 16800 Y 3.31
                        5283526 M200D400Z08S150RN16 M200D400Z08S150RN16 101.6000 4.000 85.6000 3.370 38.12 1.5 96.8400 3.812 50.8000 2.000 3.9700 .1560 8 0.170 16800 Y 3.34
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          HILFE

                          Chatten Sie mit einem Zerspanungsexperten.

                          Von 8:00 Uhr bis 18:00 Uhr Eastern Standard Time

                          Produkt

                          E-Mail-Adresse

                          +1 (888) 539 5145

                          Bestellen

                          E-Mail-Adresse

                          +1 (800) 979 4342

                          UNTERNEHMEN

                          Arbeiten Sie in unserem Expertenteam

                          Wir über uns

                           

                          UNSERE MARKEN

                          DOWNLOADS

                          SHOP

                          WIDIA-Werbeartikel kaufen

                          WIDIA-Produkte bei Amazon kaufen


                           

                           

                           


                          BLEIBEN SIE IN KONTAKT

                           

                          © 2021 WIDIA Product Group, Datenschutzrichtlinie

                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          Can’t find the file type you’re looking for?
                          Request Drawings »

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart