successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
HSR™ Vollhartmetall-Reibahlen
HSR™ Vollhartmetall-Reibahlen
HSR™ Vollhartmetall-Reibahlen
HSR™ Vollhartmetall-Reibahlen

Universal-Reibahlen für Durchgangsbohrungen • 1,4 mm – 10,0 mm (0,055" – 0,394") • Spiralförmige Spannut • K10 • Unbeschichtet • Zylinderschaft

HSR™ Vollhartmetall-Reibahlen

Features and benefits



  • Geben Sie bei der Bestellung den exakten Bohrungsdurchmesser und die Lochtoleranz an oder verwenden Sie das Formular auf Seite [REFERENCE].

Uses and application

  • Reiben: DurchgangsbohrungReiben: Durchgangsbohrung
  • Reiben: Durchgangsbohrung mit QuerbohrungReiben: Durchgangsbohrung mit Querbohrung
  • DIN 212DIN 212
  • Außenkühlung: ReibenAußenkühlung: Reiben

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (23)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (23)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (23)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (23)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (23)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (23)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (23)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (23)
  • M Stainless Steel (23)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (23)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (23)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (23)
  • K Cast Iron (23)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (23)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (23)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (23)
  • N Non-Ferrous Materials (23)
    • N1
      Wrought Aluminum
      (23)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (23)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (23)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (23)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (23)
    • N6
      Carbon, Graphite Composites, CFRP
      (23)
  • S High-Temp Alloys (23)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (23)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (23)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (23)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (23)
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (23)
  • Blind Hole Finishing Blind Hole Finishing (23)
  • Pre-Condition Pre-Condition (24)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (23)
  • Through Hole Finishing Through Hole Finishing (23)
Cutting Diameter
  • 1.4 (1)
  • 1.5 (1)
  • 1.6 (1)
  • 1.8 (1)
  • 2.0 (1)
  • 2.2 (1)
  • 2.5 (1)
  • 2.8 (1)
  • 3.0 (1)
  • 3.2 (1)
  • 3.5 (1)
  • 4.0 (1)
  • 4.5 (1)
  • 5.0 (1)
  • 5.5 (1)
  • 6.0 (1)
  • 6.5 (1)
  • 7.0 (1)
  • 7.5 (1)
  • 8.0 (1)
  • 8.5 (1)
  • 9.0 (1)
  • 9.5 (1)
  • 10.0 (1)
to
Cutting Diameter
  • 0.055 (1)
  • 0.059 (1)
  • 0.063 (1)
  • 0.071 (1)
  • 0.079 (1)
  • 0.087 (1)
  • 0.098 (1)
  • 0.11 (1)
  • 0.118 (1)
  • 0.126 (1)
  • 0.138 (1)
  • 0.157 (1)
  • 0.177 (1)
  • 0.197 (1)
  • 0.217 (1)
  • 0.236 (1)
  • 0.256 (1)
  • 0.276 (1)
  • 0.295 (1)
  • 0.315 (1)
  • 0.335 (1)
  • 0.354 (1)
  • 0.374 (1)
  • 0.394 (1)
to
Connection Style
  • Straight-Cylindrical (24)
Number of Flutes
  • 3 (3)
  • 4 (5)
  • 6 (16)
Internal Coolant Capability
application
Grade Of Cutting Tool
  • K10 (24)
Hand Of Tool
  • R (24)
Helix Hand
  • L (24)
backEnd
Connection Type
  • CYLINDRICAL (24)
Back-End Diameter
  • 0.0551 (1)
  • 0.0591 (1)
  • 0.063 (1)
  • 0.0709 (1)
  • 0.0787 (1)
  • 0.0866 (1)
  • 0.0984 (1)
  • 0.1102 (1)
  • 0.1181 (1)
  • 0.126 (1)
  • 0.1378 (1)
  • 0.1575 (1)
  • 0.1772 (1)
  • 0.1969 (1)
  • 0.2205 (2)
  • 0.248 (1)
  • 0.2795 (2)
  • 0.315 (2)
  • 0.3543 (2)
  • 0.3937 (1)
to
Back-End Diameter
  • 1.4 (1)
  • 1.5 (1)
  • 1.6 (1)
  • 1.8 (1)
  • 2.0 (1)
  • 2.2 (1)
  • 2.5 (1)
  • 2.8 (1)
  • 3.0 (1)
  • 3.2 (1)
  • 3.5 (1)
  • 4.0 (1)
  • 4.5 (1)
  • 5.0 (1)
  • 5.6 (2)
  • 6.3 (1)
  • 7.1 (2)
  • 8.0 (2)
  • 9.0 (2)
  • 10.0 (1)
to
other
Grade
  • K10 (24)
Platform
  • HSR (23)
Tool Unit
  • M (24)
obsoleteFacet
  • true (24)
  • false (23)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 24 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Reamer Diameter Minimum [D1] Reamer Diameter Minimum [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L4] Maximum Reaming Depth [L4] Maximum Reaming Depth [L10] Cutting Edge Length [L10] Cutting Edge Length [LS] Shank Length [LS] Shank Length [Z] Number of Flutes
2293636 050221-000014 050221-000014 K10 1.4000 .0550 1.4 .0551 40.0000 1.574 18.0000 .7080 8.0000 .3150 22.0 .8661 3
    2293637 050221-000015 050221-000015 K10 1.5000 .0590 1.5 .0591 40.0000 1.574 18.0000 .7080 8.0000 .3150 22.0 .8661 3
      2293638 050221-000016 050221-000016 K10 1.6000 .0630 1.6 .063 43.0000 1.692 20.0000 .7870 9.0000 .3543 23.0 .9055 3
        2293639 050221-000018 050221-000018 K10 1.8000 .0710 1.8 .0709 46.0000 1.811 22.0000 .8660 10.0000 .3937 24.0 .9449 4
          2283423 050221-000020 050221-000020 K10 2.0000 .0790 2.0 .0787 49.0000 1.929 24.0000 .9440 11.0000 .4331 25.0 .9843 4
            2283424 050221-000022 050221-000022 K10 2.2000 .0870 2.2 .0866 53.0000 2.086 26.0000 1.023 12.0000 .4724 27.0 1.063 4
              2283426 050221-000025 050221-000025 K10 2.5000 .0980 2.5 .0984 57.0000 2.244 28.0000 1.102 14.0000 .5512 29.0 1.141 4
                2283427 050221-000028 050221-000028 K10 2.8000 .1100 2.8 .1102 61.0000 2.401 32.0000 1.259 15.0000 .5906 29.0 1.141 4
                  2283428 050221-000030 050221-000030 K10 3.0000 .1180 3.0 .1181 61.0000 2.401 32.0000 1.259 15.0000 .5906 29.0 1.141 6
                    2283429 050221-000032 050221-000032 K10 3.2000 .1260 3.2 .126 65.0000 2.559 35.0000 1.377 16.0000 .6299 30.0 1.181 6
                      2283430 050221-000035 050221-000035 K10 3.5000 .1380 3.5 .1378 70.0000 2.755 40.0000 1.574 18.0000 .7087 30.0 1.181 6
                        2283431 050221-000040 050221-000040 K10 4.0000 .1570 4.0 .1575 75.0000 2.952 41.0000 1.614 19.0000 .7480 32.0 1.259 6
                          2293640 050221-000045 050221-000045 K10 4.5000 .1770 4.5 .1772 80.0000 3.149 44.0000 1.732 21.0000 .8268 33.0 1.299 6
                            2283445 050221-000050 050221-000050 K10 5.0000 .1970 5.0 .1969 86.0000 3.385 51.0000 2.007 23.0000 .9055 34.0 1.338 6
                              2293641 050221-000055 050221-000055 K10 5.5000 .2170 5.6 .2205 93.0000 3.661 57.0000 2.244 26.0000 1.023 36.0 1.417 6
                                2293642 050221-000060 050221-000060 K10 6.0000 .2360 5.6 .2205 93.0000 3.661 53.0000 2.086 26.0000 1.023 36.0 1.417 6
                                  2293643 050221-000065 050221-000065 K10 6.5000 .2560 6.3 .248 101.0000 3.976 63.0000 2.480 28.0000 1.102 38.0 1.496 6
                                    2293644 050221-000070 050221-000070 K10 7.0000 .2760 7.1 .2795 109.0000 4.291 69.0000 2.716 31.0000 1.220 40.0 1.574 6
                                      2283450 050221-000075 050221-000075 K10 7.5000 .2950 7.1 .2795 109.0000 4.291 69.0000 2.716 31.0000 1.220 40.0 1.574 6
                                        2283451 050221-000080 050221-000080 K10 8.0000 .3150 8.0 .315 117.0000 4.606 75.0000 2.952 33.0000 1.299 42.0 1.653 6
                                          2283463 050221-000085 050221-000085 K10 8.5000 .3350 8.0 .315 117.0000 4.606 75.0000 2.952 33.0000 1.299 42.0 1.653 6
                                            2283464 050221-000090 050221-000090 K10 9.0000 .3540 9.0 .3543 125.0000 4.921 81.0000 3.188 36.0000 1.417 44.0 1.732 6
                                              2283465 050221-000095 050221-000095 K10 9.5000 .3740 9.0 .3543 125.0000 4.921 81.0000 3.188 36.0000 1.417 44.0 1.732 6
                                                2283466 050221-000100 050221-000100 K10 10.0000 .3940 10.0 .3937 133.0000 5.236 87.0000 3.425 38.0000 1.496 46.0 1.811 6
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty

                                                  Grades

                                                  • K10

                                                    Zusammensetzung: Unbeschichtetes, hoch verschleißfestes, feinkörniges Hartmetallsubstrat mit verbesserter Warmfestigkeit.

                                                    Anwendung: Am besten für trockene und externe Außenkühlungsanwendungen für in der Luftfahrtbranche verwendete Werkstoffe geeignet, wie hochtemperaturbeständige Werkstoffe und geschmiedete Aluminiumlegierungen. Aufgrund ihrer hohen Verschleißfestigkeit ist diese Sorte auch für die Bearbeitung von Gusseisen bei niedrigen bis mittleren Schnittgeschwindigkeiten geeignet.

                                                    P Steel
                                                    M Stainless Steel
                                                    K Cast Iron
                                                    N Non-Ferrous
                                                    S High-Temp Alloys
                                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                  You are about to create a duplicate . Do you want to proceed?
                                                  You are about to delete Do you want to proceed?
                                                  What would you like to rename your to?
                                                  Please enter a valid name
                                                  Please enter a name for the duplicate
                                                  Please enter a valid name
                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                  Please enter a valid name
                                                  Send a copy of

                                                  Please enter a valid Email
                                                  Please enter a valid name

                                                  We have found the following CAD Drawings

                                                  Select the files you are looking for and download them all at once

                                                  You should be logged to see your dashboard information
                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                  item(s) successfully added to the cart
                                                  View Cart