successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
TOP DRILL G™ • NE-Metalle • 12 x D
TOP DRILL G™ • NE-Metalle • 12 x D
TOP DRILL G™ • NE-Metalle • 12 x D
TOP DRILL G™ • NE-Metalle • 12 x D

TDG534A • WN10HD • A-Schaft • 12 x D

TOP DRILL G™ • NE-Metalle • 12 x D

Uses and application

  • DrillingDrilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: Stacked PlatesDrilling: Stacked Plates
  • Bohrtiefe: 12xBohrtiefe: 12x
  • Zylinderschaft –  ohne Spannfläche  ≤h6Zylinderschaft – ohne Spannfläche ≤h6
  • 3849838498
  • 3855038550
  • Through Coolant: Radial: DrillingThrough Coolant: Radial: Drilling
  • MQL (Minimum Quantity Lubricant): DrillingMQL (Minimum Quantity Lubricant): Drilling

Workpiece Materials

K Cast Iron
N Non-Ferrous
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • K Cast Iron (215)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (215)
  • N Non-Ferrous Materials (215)
    • N1
      Wrought Aluminum
      (215)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (215)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (215)
Applications
  • Drilling Drilling (215)
  • Inclined Entry Drilling Inclined Entry Drilling (215)
  • Inclined Exit Drilling Inclined Exit Drilling (215)
  • Pre-Condition Pre-Condition (215)
  • Stacked Plates Drilling Stacked Plates Drilling (215)
Cutting Diameter
  • 3.0 (1)
  • 3.048 (1)
  • 3.1 (1)
  • 3.175 (1)
  • 3.2 (1)
  • 3.264 (1)
  • 3.3 (1)
  • 3.4 (1)
  • 3.455 (1)
  • 3.5 (1)
  • 3.571 (1)
  • 3.6 (1)
  • 3.658 (1)
  • 3.7 (1)
  • 3.8 (1)
  • 3.97 (1)
  • 4.0 (1)
  • 4.039 (1)
  • 4.09 (1)
  • 4.2 (1)
  • 4.217 (1)
  • 4.3 (1)
  • 4.366 (1)
  • 4.4 (1)
  • 4.5 (1)
  • 4.6 (1)
  • 4.623 (1)
  • 4.7 (1)
  • 4.763 (1)
  • 4.8 (1)
  • 4.852 (1)
  • 4.9 (1)
  • 5.1 (1)
  • 5.106 (1)
  • 5.159 (1)
  • 5.2 (1)
  • 5.3 (1)
  • 5.4 (1)
  • 5.41 (1)
  • 5.5 (1)
  • 5.558 (1)
  • 5.6 (1)
  • 5.616 (1)
  • 5.7 (1)
  • 5.9 (1)
  • 5.954 (1)
  • 6.0 (1)
  • 6.2 (1)
  • 6.3 (1)
  • 6.4 (1)
  • 6.528 (1)
  • 6.6 (1)
  • 6.63 (1)
  • 6.7 (1)
  • 6.746 (1)
  • 6.8 (1)
  • 6.9 (1)
  • 7.0 (1)
  • 7.1 (1)
  • 7.145 (1)
  • 7.2 (1)
  • 7.3 (1)
  • 7.4 (1)
  • 7.5 (1)
  • 7.541 (1)
  • 7.6 (1)
  • 7.7 (1)
  • 7.8 (1)
  • 7.9 (1)
  • 7.938 (1)
  • 8.0 (1)
  • 8.1 (1)
  • 8.2 (1)
  • 8.3 (1)
  • 8.334 (1)
  • 8.4 (1)
  • 8.433 (1)
  • 8.5 (1)
  • 8.6 (1)
  • 8.7 (1)
  • 8.733 (1)
  • 8.8 (1)
  • 8.9 (1)
  • 9.0 (1)
  • 9.1 (1)
  • 9.129 (1)
  • 9.2 (1)
  • 9.3 (1)
  • 9.347 (1)
  • 9.4 (1)
  • 9.5 (1)
  • 9.525 (1)
  • 9.6 (1)
  • 9.8 (1)
  • 9.9 (1)
  • 9.921 (1)
  • 10.0 (1)
  • 10.2 (1)
  • 10.3 (1)
  • 10.32 (1)
  • 10.4 (1)
  • 10.5 (1)
  • 10.6 (1)
  • 10.7 (1)
  • 10.716 (1)
  • 10.8 (1)
  • 10.9 (1)
  • 11.0 (1)
  • 11.1 (1)
  • 11.113 (1)
  • 11.2 (1)
  • 11.3 (1)
  • 11.4 (1)
  • 11.5 (1)
  • 11.509 (1)
  • 11.6 (1)
  • 11.7 (1)
  • 11.8 (1)
  • 11.9 (1)
  • 11.908 (1)
  • 12.0 (1)
  • 12.1 (1)
  • 12.2 (1)
  • 12.3 (1)
  • 12.304 (1)
  • 12.4 (1)
  • 12.5 (1)
  • 12.6 (1)
  • 12.7 (1)
  • 12.8 (1)
  • 12.9 (1)
  • 13.0 (1)
  • 13.1 (1)
  • 13.2 (1)
  • 13.3 (1)
  • 13.4 (1)
  • 13.49 (1)
  • 13.5 (1)
  • 13.6 (1)
  • 13.7 (1)
  • 13.8 (1)
  • 13.891 (1)
  • 13.9 (1)
  • 14.0 (1)
  • 14.1 (1)
  • 14.2 (1)
  • 14.288 (1)
  • 14.3 (1)
  • 14.4 (1)
  • 14.5 (1)
  • 14.6 (1)
  • 14.684 (1)
  • 14.7 (1)
  • 14.8 (1)
  • 14.9 (1)
  • 15.0 (1)
  • 15.083 (1)
  • 15.1 (1)
  • 15.2 (1)
  • 15.3 (1)
  • 15.4 (1)
  • 15.479 (1)
  • 15.5 (1)
  • 15.6 (1)
  • 15.7 (1)
  • 15.8 (1)
  • 15.875 (1)
  • 15.9 (1)
  • 16.0 (1)
  • 16.1 (1)
  • 16.2 (1)
  • 16.271 (1)
  • 16.3 (1)
  • 16.4 (1)
  • 16.5 (1)
  • 16.6 (1)
  • 16.67 (1)
  • 16.7 (1)
  • 16.8 (1)
  • 16.9 (1)
  • 17.0 (1)
  • 17.1 (1)
  • 17.2 (1)
  • 17.3 (1)
  • 17.4 (1)
  • 17.463 (1)
  • 17.6 (1)
  • 17.7 (1)
  • 17.8 (1)
  • 17.859 (1)
  • 17.9 (1)
  • 18.0 (1)
  • 18.1 (1)
  • 18.2 (1)
  • 18.258 (1)
  • 18.3 (1)
  • 18.4 (1)
  • 18.5 (1)
  • 18.6 (1)
  • 18.654 (1)
  • 18.7 (1)
  • 18.8 (1)
  • 18.9 (1)
  • 19.0 (1)
  • 19.05 (1)
  • 19.1 (1)
  • 19.2 (1)
  • 19.3 (1)
  • 19.4 (1)
  • 19.5 (1)
  • 19.6 (1)
  • 19.7 (1)
  • 19.8 (1)
  • 19.9 (1)
  • 20.0 (1)
to
Cutting Diameter
  • 0.1181 (1)
  • 0.12 (1)
  • 0.122 (1)
  • 0.125 (1)
  • 0.126 (1)
  • 0.1285 (1)
  • 0.1299 (1)
  • 0.1339 (1)
  • 0.136 (1)
  • 0.1378 (1)
  • 0.1406 (1)
  • 0.1417 (1)
  • 0.144 (1)
  • 0.1457 (1)
  • 0.1496 (1)
  • 0.1563 (1)
  • 0.1575 (1)
  • 0.159 (1)
  • 0.161 (1)
  • 0.1654 (1)
  • 0.166 (1)
  • 0.1693 (1)
  • 0.1719 (1)
  • 0.1732 (1)
  • 0.1772 (1)
  • 0.1811 (1)
  • 0.182 (1)
  • 0.185 (1)
  • 0.1875 (1)
  • 0.189 (1)
  • 0.191 (1)
  • 0.1929 (1)
  • 0.2008 (1)
  • 0.201 (1)
  • 0.2031 (1)
  • 0.2047 (1)
  • 0.2087 (1)
  • 0.2126 (1)
  • 0.213 (1)
  • 0.2165 (1)
  • 0.2188 (1)
  • 0.2205 (1)
  • 0.2211 (1)
  • 0.2244 (1)
  • 0.2323 (1)
  • 0.2344 (1)
  • 0.2362 (1)
  • 0.2441 (1)
  • 0.248 (1)
  • 0.252 (1)
  • 0.257 (1)
  • 0.2598 (1)
  • 0.261 (1)
  • 0.2638 (1)
  • 0.2656 (1)
  • 0.2677 (1)
  • 0.2717 (1)
  • 0.2756 (1)
  • 0.2795 (1)
  • 0.2813 (1)
  • 0.2835 (1)
  • 0.2874 (1)
  • 0.2913 (1)
  • 0.2953 (1)
  • 0.2969 (1)
  • 0.2992 (1)
  • 0.3031 (1)
  • 0.3071 (1)
  • 0.311 (1)
  • 0.3125 (1)
  • 0.315 (1)
  • 0.3189 (1)
  • 0.3228 (1)
  • 0.3268 (1)
  • 0.3281 (1)
  • 0.3307 (1)
  • 0.332 (1)
  • 0.3346 (1)
  • 0.3386 (1)
  • 0.3425 (1)
  • 0.3438 (1)
  • 0.3465 (1)
  • 0.3504 (1)
  • 0.3543 (1)
  • 0.3583 (1)
  • 0.3594 (1)
  • 0.3622 (1)
  • 0.3661 (1)
  • 0.368 (1)
  • 0.3701 (1)
  • 0.374 (1)
  • 0.375 (1)
  • 0.378 (1)
  • 0.3858 (1)
  • 0.3898 (1)
  • 0.3906 (1)
  • 0.3937 (1)
  • 0.4016 (1)
  • 0.4055 (1)
  • 0.4063 (1)
  • 0.4094 (1)
  • 0.4134 (1)
  • 0.4173 (1)
  • 0.4213 (1)
  • 0.4219 (1)
  • 0.4252 (1)
  • 0.4291 (1)
  • 0.4331 (1)
  • 0.437 (1)
  • 0.4375 (1)
  • 0.4409 (1)
  • 0.4449 (1)
  • 0.4488 (1)
  • 0.4528 (1)
  • 0.4531 (1)
  • 0.4567 (1)
  • 0.4606 (1)
  • 0.4646 (1)
  • 0.4685 (1)
  • 0.4688 (1)
  • 0.4724 (1)
  • 0.4764 (1)
  • 0.4803 (1)
  • 0.4843 (1)
  • 0.4844 (1)
  • 0.4882 (1)
  • 0.4921 (1)
  • 0.4961 (1)
  • 0.5 (1)
  • 0.5039 (1)
  • 0.5079 (1)
  • 0.5118 (1)
  • 0.5157 (1)
  • 0.5197 (1)
  • 0.5236 (1)
  • 0.5276 (1)
  • 0.5311 (1)
  • 0.5315 (1)
  • 0.5354 (1)
  • 0.5394 (1)
  • 0.5433 (1)
  • 0.5469 (1)
  • 0.5472 (1)
  • 0.5512 (1)
  • 0.5551 (1)
  • 0.5591 (1)
  • 0.5625 (1)
  • 0.563 (1)
  • 0.5669 (1)
  • 0.5709 (1)
  • 0.5748 (1)
  • 0.5781 (1)
  • 0.5787 (1)
  • 0.5827 (1)
  • 0.5866 (1)
  • 0.5906 (1)
  • 0.5938 (1)
  • 0.5945 (1)
  • 0.5984 (1)
  • 0.6024 (1)
  • 0.6063 (1)
  • 0.6094 (1)
  • 0.6102 (1)
  • 0.6142 (1)
  • 0.6181 (1)
  • 0.622 (1)
  • 0.625 (1)
  • 0.626 (1)
  • 0.6299 (1)
  • 0.6339 (1)
  • 0.6378 (1)
  • 0.6406 (1)
  • 0.6417 (1)
  • 0.6457 (1)
  • 0.6496 (1)
  • 0.6535 (1)
  • 0.6563 (1)
  • 0.6575 (1)
  • 0.6614 (1)
  • 0.6654 (1)
  • 0.6693 (1)
  • 0.6732 (1)
  • 0.6772 (1)
  • 0.6811 (1)
  • 0.685 (1)
  • 0.6875 (1)
  • 0.6929 (1)
  • 0.6969 (1)
  • 0.7008 (1)
  • 0.7031 (1)
  • 0.7047 (1)
  • 0.7087 (1)
  • 0.7126 (1)
  • 0.7165 (1)
  • 0.7188 (1)
  • 0.7205 (1)
  • 0.7244 (1)
  • 0.7283 (1)
  • 0.7323 (1)
  • 0.7344 (1)
  • 0.7362 (1)
  • 0.7402 (1)
  • 0.7441 (1)
  • 0.748 (1)
  • 0.75 (1)
  • 0.752 (1)
  • 0.7559 (1)
  • 0.7598 (1)
  • 0.7638 (1)
  • 0.7677 (1)
  • 0.7717 (1)
  • 0.7756 (1)
  • 0.7795 (1)
  • 0.7835 (1)
  • 0.7874 (1)
to
Maximum Hole Depth [L4]
  • 1.6929 (1)
  • 1.7323 (9)
  • 1.7717 (4)
  • 2.1654 (2)
  • 2.2047 (9)
  • 2.2441 (3)
  • 2.7165 (4)
  • 2.7559 (4)
  • 2.7953 (6)
  • 2.8346 (5)
  • 3.2283 (1)
  • 3.2677 (6)
  • 3.3071 (4)
  • 3.7008 (3)
  • 3.7402 (6)
  • 3.7795 (4)
  • 4.5669 (2)
  • 4.6063 (8)
  • 4.6457 (6)
  • 4.685 (7)
  • 4.7244 (3)
  • 5.5118 (1)
  • 5.5512 (6)
  • 5.5906 (7)
  • 5.6299 (7)
  • 5.6693 (3)
  • 6.4567 (2)
  • 6.4961 (6)
  • 6.5354 (5)
  • 6.5748 (7)
  • 6.6142 (3)
  • 7.4016 (4)
  • 7.4409 (3)
  • 7.4803 (8)
  • 7.5197 (5)
  • 7.5591 (5)
  • 8.3465 (4)
  • 8.3858 (3)
  • 8.4252 (8)
  • 8.4646 (3)
  • 8.5039 (5)
  • 9.2913 (3)
  • 9.3307 (6)
  • 9.3701 (5)
  • 9.4094 (6)
  • 9.4488 (3)
to
Maximum Hole Depth [L4]
  • 43.0 (1)
  • 44.0 (9)
  • 45.0 (4)
  • 55.0 (2)
  • 56.0 (9)
  • 57.0 (3)
  • 69.0 (4)
  • 70.0 (4)
  • 71.0 (6)
  • 72.0 (5)
  • 82.0 (1)
  • 83.0 (6)
  • 84.0 (4)
  • 94.0 (3)
  • 95.0 (6)
  • 96.0 (4)
  • 116.0 (2)
  • 117.0 (8)
  • 118.0 (6)
  • 119.0 (7)
  • 120.0 (3)
  • 140.0 (1)
  • 141.0 (6)
  • 142.0 (7)
  • 143.0 (7)
  • 144.0 (3)
  • 164.0 (2)
  • 165.0 (6)
  • 166.0 (5)
  • 167.0 (7)
  • 168.0 (3)
  • 188.0 (4)
  • 189.0 (3)
  • 190.0 (8)
  • 191.0 (5)
  • 192.0 (5)
  • 212.0 (4)
  • 213.0 (3)
  • 214.0 (8)
  • 215.0 (3)
  • 216.0 (5)
  • 236.0 (3)
  • 237.0 (6)
  • 238.0 (5)
  • 239.0 (6)
  • 240.0 (3)
to
Reach
  • 55.0 (14)
  • 69.0 (14)
  • 87.0 (19)
  • 101.0 (11)
  • 115.0 (13)
  • 143.0 (26)
  • 171.0 (24)
  • 199.0 (23)
  • 227.0 (25)
  • 255.0 (23)
  • 282.0 (23)
to
Reach
  • 2.1654 (14)
  • 2.7165 (14)
  • 3.4252 (19)
  • 3.9764 (11)
  • 4.5276 (13)
  • 5.6299 (26)
  • 6.7323 (24)
  • 7.8346 (23)
  • 8.937 (25)
  • 10.0394 (23)
  • 11.1024 (23)
to
Connection Style
  • Straight-Cylindrical (215)
Number of Flutes
  • 2 (215)
application
Coating
  • Uncoated (215)
Grade Of Cutting Tool
  • WN10HD (215)
Hand Of Tool
  • R (215)
Drill Type
  • 81-01 (215)
frontEnd
Point Angle
  • 130.0 (215)
to
backEnd
Connection Type
  • CYLINDRICAL (215)
Back-End Diameter
  • 0.2362 (47)
  • 0.315 (24)
  • 0.3937 (26)
  • 0.4724 (24)
  • 0.5512 (23)
  • 0.6299 (25)
  • 0.7087 (23)
  • 0.7874 (23)
to
Back-End Diameter
  • 6.0 (47)
  • 8.0 (24)
  • 10.0 (26)
  • 12.0 (24)
  • 14.0 (23)
  • 16.0 (25)
  • 18.0 (23)
  • 20.0 (23)
to
other
Grade
  • WN10HD (215)
Platform
  • Top Drill G (9)
Tool Unit
  • I (55)
  • M (160)
Over All Length [L]
  • 93.0 (14)
  • 107.0 (14)
  • 125.0 (19)
  • 139.0 (11)
  • 153.0 (13)
  • 185.0 (26)
  • 218.0 (24)
  • 246.0 (23)
  • 277.0 (25)
  • 305.0 (23)
  • 334.0 (23)
to
Over All Length [L]
  • 3.6614 (14)
  • 4.2126 (14)
  • 4.9213 (19)
  • 5.4724 (11)
  • 6.0236 (13)
  • 7.2835 (26)
  • 8.5827 (24)
  • 9.685 (23)
  • 10.9055 (25)
  • 12.0079 (23)
  • 13.1496 (23)
to
obsoleteFacet
  • true (215)
  • false (9)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 215 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Drill Diameter M [D1] Drill Diameter M [D1] Wire Size [L] Overall Length [L] Overall Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4157357 TDG534A03000 TDG534A03000 WN10HD 3.0000 .1181   93.0000 3.661 44.0000 1.732 55.0000 2.165 0.6990 .0275 36.0 1.417 6.0 .2362
    4157358 TDG534A03048 TDG534A03048 WN10HD 3.0480 .1200 31 93.0000 3.661 44.0000 1.732 55.0000 2.165 0.7110 .0280 36.0 1.417 6.0 .2362
      4157359 TDG534A03100 TDG534A03100 WN10HD 3.1000 .1220   93.0000 3.661 44.0000 1.732 55.0000 2.165 0.7230 .0285 36.0 1.417 6.0 .2362
        4157360 TDG534A03175 TDG534A03175 WN10HD 3.1750 .1250   93.0000 3.661 44.0000 1.732 55.0000 2.165 0.7400 .0291 36.0 1.417 6.0 .2362
          4157361 TDG534A03200 TDG534A03200 WN10HD 3.2000 .1260   93.0000 3.661 43.0000 1.692 55.0000 2.165 0.7460 .0294 36.0 1.417 6.0 .2362
            4157362 TDG534A03264 TDG534A03264 WN10HD