successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
S-Klemmung
S-Klemmung
S-Klemmung
S-Klemmung

SCLC 95°

S-Klemmung

Uses and application

  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2)
    • N6
      Carbon, Graphite Composites, CFRP
      (2)
    • N7
      MMC's
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
  • Back Boring Back Boring (2)
  • Facing Facing (2)
  • Multiple Direction Cutting Multiple Direction Cutting (2)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (2)
  • Turning Turning (2)
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (2)
  • Smooth Cut (2)
  • Varying Depth of Cut (2)
Tool Cutting Edge Angle
  • 95.0 (2)
to
Connection Style
  • KM (2)
Cutting Edges Per Insert
  • 2.0 (2)
  • 4.0 (2)
to
cornerConfiguration
Corner Radius
  • 0.1 (2)
  • 0.2 (2)
  • 0.4 (2)
  • 0.794 (2)
  • 0.8 (2)
  • 1.2 (2)
to
Corner Radius
  • 0.004 (2)
  • 0.008 (2)
  • 0.0156 (2)
  • 0.0158 (2)
  • 0.016 (2)
  • 0.0312 (2)
  • 0.0313 (2)
  • 0.0315 (2)
  • 0.0469 (2)
  • 0.047 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • HCK10 (2)
  • HK35 (2)
  • HT2 (2)
  • HTX (2)
  • HWK15 (2)
  • K10M (2)
  • K10P (2)
  • K20K (2)
  • K313 (2)
  • K68 (2)
  • KB1345 (2)
  • KB1630 (2)
  • KBH20 (2)
  • KC5010 (2)
  • KC5025 (2)
  • KC5410 (2)
  • KC720 (2)
  • KC730 (2)
  • KC732 (2)
  • KC8050 (2)
  • KC810 (2)
  • KC850 (2)
  • KC9025 (2)
  • KC910 (2)
  • KC9105 (2)
  • KC9110 (2)
  • KC9125 (2)
  • KC9225 (2)
  • KC9240 (2)
  • KC9240NEW (2)
  • KC9315 (2)
  • KC9320 (2)
  • KC9325 (2)
  • KC935 (2)
  • KCD25 (2)
  • KCK05 (2)
  • KCK15 (2)
  • KCK15B (2)
  • KCK20 (2)
  • KCK20B (2)
  • KCM15 (2)
  • KCM15B (2)
  • KCM25 (2)
  • KCM25B (2)
  • KCM35 (2)
  • KCP05 (2)
  • KCP10 (2)
  • KCP10B (2)
  • KCP25 (2)
  • KCP25B (2)
  • KCP30 (2)
  • KCP30B (2)
  • KCS10 (2)
  • KCS10B (2)
  • KCU10 (2)
  • KCU25 (2)
  • KT315 (2)
  • KT325 (2)
  • KU10T (2)
  • KU30T (2)
  • NL300 (2)
  • NL920 (2)
  • PB170 (2)
  • PB250 (2)
  • PD100 (2)
  • PD50 (2)
  • SP0PW3 (2)
  • SP4019 (2)
  • THM (2)
  • THM-X (2)
  • TN10P (2)
  • TN10U (2)
  • TN15M (2)
  • TN2000 (2)
  • TN20K (2)
  • TN20P (2)
  • TN30M (2)
  • TN5015 (2)
  • TN5020 (2)
  • TN5105 (2)
  • TN5120 (2)
  • TN6010 (2)
  • TN7010 (2)
  • TN7015 (2)
  • TN7025 (2)
  • TN7035 (2)
  • TN7105 (2)
  • TN7110 (2)
  • TN7115 (2)
  • TN7125 (2)
  • TN7135 (2)
  • TN8025 (2)
  • TTR (2)
  • W00342 (2)
  • WBH20P (2)
  • WBK45U (2)
  • WK05CT (2)
  • WK15CT (2)
  • WK20CT (2)
  • WM15CT (2)
  • WM25CT (2)
  • WP15CT (2)
  • WP25CT (2)
  • WP35CT (2)
  • WS10PT (2)
  • WU10HT (2)
Hand Of Tool
  • L (1)
  • R (1)
Wiper Insert
  • N (2)
  • Y (2)
Minimum Axial Groove Diameter
  • 1.969 (2)
to
Minimum Axial Groove Diameter
  • 50.0 (2)
to
Cutting Direction
  • B (2)
Rake Angle Style
  • NEGATIVE-ZERO (2)
Maximum Bore Depth
  • 114.05 (2)
to
Maximum Bore Depth
  • 4.49 (2)
to
Boring Bar Material
  • S (2)
frontEnd
Clamp Style
  • S (2)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
insertGeometry
Cutting Tool Material
  • B H (2)
  • B L (2)
  • D P (2)
  • H T (2)
  • H W (2)
backEnd
Connection Type
  • TAPER SHANK (2)
System Size
  • KM4X63 (2)
Back-End Diameter
  • 2.5 (2)
to
Back-End Diameter
  • 63.0 (2)
to
other
Platform
  • KM4X63 (2)
Tool Unit
  • M (2)
Over All Length [L]
  • 140.0 (2)
to
Over All Length [L]
  • 5.512 (2)
to
Insert Hand
  • N (2)
  • R (2)
obsoleteFacet
  • false (2)
  • true (2)
Cutting Condition Material
  • H-All (2)
  • K-All (2)
  • M-All (2)
  • N-All (2)
  • P-All (2)
  • S-All (2)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 2 of 2 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
5637823 KM4X63S40LSCLCL12 KM4X63S40LSCLCL12 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 CC..120408/CC..432 1.72 3.80
    5637824 KM4X63S40LSCLCR12 KM4X63S40LSCLCR12 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 CC..120408/CC..432 1.72 3.80
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty
      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart