successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert
Stahlschaft mit innerer Kühlmittelzuführung
Stahlschaft mit innerer Kühlmittelzuführung
Stahlschaft mit innerer Kühlmittelzuführung
Stahlschaft mit innerer Kühlmittelzuführung

A-PCLN 95°

Stahlschaft mit innerer Kühlmittelzuführung

Uses and application

  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • 5236852368

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
  • Back Boring Back Boring (8)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (8)
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Tool Cutting Edge Angle
  • 95.0 (8)
to
Connection Style
  • Boring Bar Shank (8)
Cutting Edges Per Insert
  • 1.0 (6)
  • 2.0 (6)
  • 4.0 (8)
  • 8.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.1 (6)
  • 0.102 (6)
  • 0.2 (6)
  • 0.397 (6)
  • 0.4 (6)
  • 0.794 (6)
  • 0.8 (8)
  • 1.191 (8)
  • 1.2 (8)
  • 1.6 (8)
  • 2.4 (2)
to
Corner Radius
  • 0.004 (6)
  • 0.008 (6)
  • 0.0156 (6)
  • 0.0312 (6)
  • 0.0313 (8)
  • 0.0315 (6)
  • 0.0469 (8)
  • 0.0472 (6)
  • 0.0625 (8)
  • 0.0938 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CW2015 (8)
  • CW5025 (8)
  • HK1500 (6)
  • PB100 (6)
  • PB170 (6)
  • PB250 (6)
  • PB300 (6)
  • THM (6)
  • THM-X (6)
  • THMF-X (6)
  • TN10P (8)
  • TN10U (6)
  • TN15M (8)
  • TN15U (6)
  • TN2000 (6)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN30P (8)
  • TN4000 (6)
  • TN5015 (8)
  • TN5020 (8)
  • TN5105 (6)
  • TN5120 (8)
  • TN6010 (6)
  • TN6025 (6)
  • TN7005 (6)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (6)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (8)
  • TTI15 (6)
  • TTR (6)
  • TTS (6)
  • TTX (6)
  • WBH10C (6)
  • WBH10P (6)
  • WBH10U (6)
  • WBH25P (6)
  • WBH25U (6)
  • WBH30P (6)
  • WBK40U (6)
  • WBK45U (6)
  • WDN00U (6)
  • WDN25U (6)
  • WK05CT (8)
  • WK15CT (6)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WM35CT (8)
  • WP05CT (6)
  • WP15CT (8)
  • WP25CT (8)
  • WP35CT (8)
  • WS10PT (8)
  • WS25PT (8)
  • WU10HT (8)
Hand Of Tool
  • L (4)
  • R (4)
Wiper Insert
  • N (8)
  • Y (6)
Minimum Axial Groove Diameter
  • 1.26 (2)
  • 1.575 (2)
  • 1.9685 (2)
  • 1.969 (2)
to
Minimum Axial Groove Diameter
  • 32.0 (2)
  • 40.0 (2)
  • 50.0 (4)
to
Cutting Direction
  • B (8)
Rake Angle Style
  • DOUBLE NEGATIVE (8)
Maximum Bore Depth
  • 100.0 (2)
  • 128.0 (2)
  • 160.0 (4)
to
Maximum Bore Depth
  • 3.92 (2)
  • 5.04 (2)
  • 6.28 (2)
  • 6.2992 (2)
to
Boring Bar Material
  • S (8)
frontEnd
Clamp Style
  • P (8)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
insertGeometry
Cutting Tool Material
  • B H (6)
  • B L (6)
  • C A (8)
  • C N (8)
  • D P (6)
  • H T (6)
  • H W (8)
backEnd
Connection Type
  • BORING BAR (8)
Back-End Diameter
  • 0.98 (2)
  • 1.26 (2)
  • 1.57 (2)
  • 1.5748 (2)
to
Back-End Diameter
  • 25.0 (2)
  • 32.0 (2)
  • 40.0 (4)
to
other
Grade
  • WG (8)
Platform
  • P-Style Clamping (7)
Tool Unit
  • M (8)
Over All Length [L]
  • 300.0 (2)
  • 350.0 (2)
  • 400.0 (4)
to
Over All Length [L]
  • 11.811 (2)
  • 13.78 (2)
  • 15.748 (4)
to
Insert Hand
  • N (8)
obsoleteFacet
  • true (8)
  • false (7)
Cutting Condition Material
  • H-All (6)
  • K-All (8)
  • M-All (8)
  • N-All (6)
  • P-All (8)
  • S-All (8)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 8 of 8 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [CS] Coolant Supply Size Gage Insert Lock Screw ID Drive Size
3883469 A25TPCLNL12 A25TPCLNL12 WG 25.0 .98 32.0000 1.260 17.0000 .6690 300.0000 11.811 40.000 1.574 1/4-18 NPT CN..120408 10 IP
    3883468 A25TPCLNR12 A25TPCLNR12 WG 25.0 .98 32.0000 1.260 17.0000 .6690 300.0000 11.811 40.000 1.574 1/4-18 NPT CN..120408 10 IP
      3883467 A32UPCLNL12 A32UPCLNL12 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 350.0000 13.780 50.000 1.968 1/4-18 NPT CN..120408 15 IP
        3883466 A32UPCLNR12 A32UPCLNR12 WG 32.0 1.26 40.0000 1.575 22.0000 .8660 350.0000 13.780 50.000 1.968 1/4-18 NPT CN..120408 15 IP
          3883465 A40TPCLNL12 A40TPCLNL12 WG 40.0 1.57 50.0000 1.969 27.0000 1.063 400.0000 15.748 55.000 2.165 1/4-18 NPT CN..120408 15 IP
            3883463 A40TPCLNR12 A40TPCLNR12 WG 40.0 1.57 50.0000 1.969 27.0000 1.060 400.0000 15.748 55.000 2.165 1/4-18 NPT CN..120408 15 IP
              3883442 A40TPCLNR16 A40TPCLNR16 WG 40.0 1.574 50.0000 1.968 27.0000 1.063 400.0000 15.748 55.0000 2.165 1/4-18 NPT CN..160612 15 IP
                3883464 A40VPCLNL16 A40VPCLNL16 WG 40.0 1.574 50.0000 1.968 27.0000 1.063 400.0000 15.748 55.0000 2.165 1/4-18 NPT CN..160612 15 IP
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Grades

                  • WG
                    P Steel
                    M Stainless Steel
                    K Cast Iron
                    N Non-Ferrous
                    S High-Temp Alloys
                    H Hardened Materials
                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart