4103
4103
Features and benefits
- Über Mitte schneidend.
- Standardprodukte sind aufgelistet. Andere Ausführungen und Beschichtungen werden speziell auf Bestellung gefertigt.
Uses and application
38571
Spiralwinkel: 45°
Schneideckenausführung: Ebene Stirnfläche
Schräg-Eintauchfräsen Ins Volle
Side Milling/Shoulder Milling: Square End
Nutenfräsen: Ebene Stirnfläche
Workpiece Materials
P
M
K
N
S
H
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
-
P Steel (25)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
-
-
M Stainless Steel (25)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
-
-
K Cast Iron (25)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
-
-
N Non-Ferrous Materials (25)
-
N1Wrought Aluminum(25)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
-
N3High-Silicon Aluminum Alloys Si >12.2%(25)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100(25)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass(25)
-
N6Carbon, Graphite Composites, CFRP(25)
-
N7MMC's(25)
-
-
S High-Temp Alloys (25)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
-
-
H Hardened Materials (25)
-
H1Hardened Materials 44-48 HRC(25)
-
H2Hardened Materials 48-55 HRC(25)
-
H3Hardened Materials 56-60 HRC(25)
-
H4Hardened Materials >60 HRC(25)
-
Applications
-
Chamfer Milling (25)
-
Countersinking (25)
-
Face Milling (25)
-
Flat Bottom Drilling (25)
-
Pocket (25)
-
Pocket Helical (25)
-
Pocket Milling (25)
-
Pocket Plunge Milling (25)
-
Profile Milling (25)
-
Ramping (25)
-
Shoulder Ball Nose (25)
-
Shoulder Milling (25)
-
-
Slot Ball Nose (25)
-
Slot Milling (25)
-
Slot Side (25)
-
Slot Square End (25)
Cutting Diameter
-
3.0 (3)
-
4.0 (3)
-
5.0 (3)
-
6.0 (2)
-
8.0 (2)
-
10.0 (2)
-
12.0 (2)
-
14.0 (2)
-
16.0 (2)
-
18.0 (2)
-
20.0 (2)
to
Cutting Diameter
-
0.118 (2)
-
0.1181 (1)
-
0.157 (2)
-
0.1575 (1)
-
0.197 (3)
-
0.236 (2)
-
0.315 (2)
-
0.394 (2)
-
0.472 (2)
-
0.551 (2)
-
0.63 (2)
-
0.709 (2)
-
0.787 (2)
to
Cutting Length
-
0.472 (4)
-
0.4724 (2)
-
0.551 (3)
-
0.63 (2)
-
0.787 (2)
-
0.866 (2)
-
0.984 (2)
-
1.26 (4)
-
1.496 (4)
to
Cutting Length
-
12.0 (6)
-
14.0 (3)
-
16.0 (2)
-
20.0 (2)
-
22.0 (2)
-
25.0 (2)
-
32.0 (4)
-
38.0 (4)
to
Reach
-
12.0 (6)
-
14.0 (3)
-
16.0 (2)
-
20.0 (2)
-
22.0 (2)
-
25.0 (2)
-
32.0 (4)
-
38.0 (4)
to
Reach
-
0.472 (4)
-
0.4724 (2)
-
0.551 (3)
-
0.63 (2)
-
0.787 (2)
-
0.866 (2)
-
0.984 (2)
-
1.26 (4)
-
1.496 (4)
to
Tool Cutting Edge Angle
-
90.0 (25)
to
Corner Radius
-
0.0 (25)
to
Corner Radius
-
0.0 (25)
to
Corner Chamfer
-
0.0 (25)
to
Corner Chamfer
-
0.0 (25)
to
application
Grade Of Cutting Tool
-
TICN-CT (11)
-
UNCOATED (14)
backEnd
Back-End Diameter
-
0.1181 (2)
-
0.1575 (2)
-
0.1969 (2)
-
0.2362 (5)
-
0.315 (2)
-
0.3937 (2)
-
0.4724 (2)
-
0.5512 (2)
-
0.6299 (2)
-
0.7087 (2)
-
0.7874 (2)
to
Back-End Diameter
-
3.0 (2)
-
4.0 (2)
-
5.0 (2)
-
6.0 (5)
-
8.0 (2)
-
10.0 (2)
-
12.0 (2)
-
14.0 (2)
-
16.0 (2)
-
18.0 (2)
-
20.0 (2)
to
other
Grade
-
TICN-CT (11)
-
UNCOATED (14)
Platform
-
Series 4103 (20)
Tool Unit
-
M (25)
Over All Length [L]
-
38.0 (2)
-
50.0 (9)
-
63.0 (2)
-
76.0 (4)
-
83.0 (2)
-
89.0 (2)
-
100.0 (2)
-
104.0 (2)
to
Over All Length [L]
-
1.496 (2)
-
1.9685 (2)
-
1.969 (7)
-
2.48 (2)
-
2.992 (4)
-
3.268 (2)
-
3.504 (2)
-
3.937 (2)
-
4.094 (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 10
of 25 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | [L] Overall Length | [L] Overall Length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1656500 | 410303000.. | 410303000.. | UNCOATED | Straight-Cylindrical | 3.0000 | .1180 | 3.0 | .1181 | 12.0000 | .4720 | 38.0000 | 1.496 |
|
| 1902322 | 410303000CT | 410303000CT | TICN-CT | Straight-Cylindrical | 3.0000 | .1180 | 3.0 | .1181 | 12.0000 | .4720 | 38.0000 | 1.496 |
|
| 3079516 | 410303002.. | 410303002.. | UNCOATED | Straight-Cylindrical | 3.0000 | .1181 | 6.0 | .2362 | 12.0000 | .4724 | 50.0000 | 1.968 |
|
| 1656501 | 410304001.. | 410304001.. | UNCOATED | Straight-Cylindrical | 4.0000 | .1570 | 4.0 | .1575 | 12.0000 | .4720 | 50.0000 | 1.969 |
|
| 1656502 | 410304001CT | 410304001CT | TICN-CT | Straight-Cylindrical | 4.0000 | .1570 | 4.0 | .1575 | 12.0000 | .4720 | 50.0000 | 1.969 |
|
| 1656503 | 410304002.. | 410304002.. | UNCOATED | Straight-Cylindrical | 4.0000 | .1575 | 6.0 | .2362 | 12.0000 | .4724 | 50.0000 | 1.968 |
|
| 1656504 | 410305001.. | 410305001.. | UNCOATED | Straight-Cylindrical | 5.0000 | .1970 | 5.0 | .1969 | 14.0000 | .5510 | 50.0000 | 1.969 |
|
| 1902576 | 410305001CT | 410305001CT | TICN-CT | Straight-Cylindrical | 5.0000 | .1970 | 5.0 | .1969 | 14.0000 | .5510 | 50.0000 | 1.969 |
|
| 1656505 | 410305002.. | 410305002.. | UNCOATED | Straight-Cylindrical | 5.0000 | .1970 | 6.0 | .2362 | 14.0000 | .5510 | 50.0000 | 1.969 |
|
| 1656506 | 410306002.. | 410306002.. | UNCOATED | Straight-Cylindrical | 6.0000 | .2360 | 6.0 | .2362 | 16.0000 | .6300 | 50.0000 | 1.969 |
|
| 1656507 | 410306002CT | 410306002CT | TICN-CT | Straight-Cylindrical | 6.0000 | .2360 | 6.0 | .2362 | 16.0000 | .6300 | 50.0000 | 1.969 |
|
| 1656508 | 410308003.. | 410308003.. | UNCOATED | Straight-Cylindrical | 8.0000 | .3150 | 8.0 | .315 | 20.0000 | .7870 | 63.0000 | 2.480 |
|
| 1656509 | 410308003CT | 410308003CT | TICN-CT | Straight-Cylindrical | 8.0000 | .3150 | 8.0 | .315 | 20.0000 | .7870 | 63.0000 | 2.480 |
|
| 1656510 | 410310004.. | 410310004.. | UNCOATED | Straight-Cylindrical | 10.0000 | .3940 | 10.0 | .3937 | 22.0000 | .8660 | 76.0000 | 2.992 |
|
| 1902578 | 410310004CT | 410310004CT | TICN-CT | Straight-Cylindrical | 10.0000 | .3940 | 10.0 | .3937 | 22.0000 | .8660 | 76.0000 | 2.992 |
|
| 1656511 | 410312005.. | 410312005.. | UNCOATED | Straight-Cylindrical | 12.0000 | .4720 | 12.0 | .4724 | 25.0000 | .9840 | 76.0000 | 2.992 |
|
| 1902579 | 410312005CT | 410312005CT | TICN-CT | Straight-Cylindrical | 12.0000 | .4720 | 12.0 | .4724 | 25.0000 | .9840 | 76.0000 | 2.992 |
|
| 1656512 | 410314014.. | 410314014.. | UNCOATED | Straight-Cylindrical | 14.0000 | .5510 | 14.0 | .5512 | 32.0000 | 1.260 | 83.0000 | 3.268 |
|
| 1902593 | 410314014CT | 410314014CT | TICN-CT | Straight-Cylindrical | 14.0000 | .5510 | 14.0 | .5512 | 32.0000 | 1.260 | 83.0000 | 3.268 |
|
| 1656513 | 410316006.. | 410316006.. | UNCOATED | Straight-Cylindrical | 16.0000 | .6300 | 16.0 | .6299 | 32.0000 | 1.260 | 89.0000 | 3.504 |
|
| 1902594 | 410316006CT | 410316006CT | TICN-CT | Straight-Cylindrical | 16.0000 | .6300 | 16.0 | .6299 | 32.0000 | 1.260 | 89.0000 | 3.504 |
|
| 1656514 | 410318018.. | 410318018.. | UNCOATED | Straight-Cylindrical | 18.0000 | .7090 | 18.0 | .7087 | 38.0000 | 1.496 | 100.0000 | 3.937 |
|
| 1902595 | 410318018CT | 410318018CT | TICN-CT | Straight-Cylindrical | 18.0000 | .7090 | 18.0 | .7087 | 38.0000 | 1.496 | 100.0000 | 3.937 |
|
| 1656515 | 410320007.. | 410320007.. | UNCOATED | Straight-Cylindrical | 20.0000 | .7870 | 20.0 | .7874 | 38.0000 | 1.496 | 104.0000 | 4.094 |
|
| 1902596 | 410320007CT | 410320007CT | TICN-CT | Straight-Cylindrical | 20.0000 | .7870 | 20.0 | .7874 | 38.0000 | 1.496 | 104.0000 | 4.094 |
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
Grades
-
TICN-CTPMKNSH
-
UNCOATEDPMKNSH
4103
 |  |  | |||||||||||||||||
| Side Milling (A) and Slotting (B) | uncoated | TiCN | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||
| A | B | Cutting Speed vc m/min | Cutting Speed vc m/min | D1 Diameter | |||||||||||||||
| Material Group | ap | ae | ap | min | max | min | max | mm | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| N | 1 | 1 x D | 0,5 x D | 0,7 x D | 500 | – | 2000 | 500 | – | 2000 | fz | 0,027 | 0,036 | 0,054 | 0,072 | 0,090 | 0,108 | 0,144 | 0,180 |
| 2 | 1 x D | 0,5 x D | 0,7 x D | 500 | – | 1500 | 500 | – | 1500 | fz | 0,024 | 0,032 | 0,049 | 0,065 | 0,081 | 0,097 | 0,130 | 0,162 | |
